1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Building intercom systemsPart 3-1: Application guidelines - GeneralBS EN IEC 62820-3-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62820-3-1 June 2018 ICS 13.320 English Version Building intercom system
2、s - Part 3-1: Application guidelines - General (IEC 62820-3-1:2017) Systmes dinterphone de btiment - Partie 3-1: Lignes directrices dapplication - Gnralits (IEC 62820-3-1:2017) Gebude-Sprechanlagen - Teil 3-1: Generelle Anwendungsrichtlinien (IEC 62820-3-1:2017) This European Standard was approved b
3、y CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national s
4、tandards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own lan
5、guage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fra
6、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europ
7、en de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62820-3-1:2018 E Nat
8、ional forewordThis British Standard is the UK implementation of EN IEC 6282031:2018. It is identical to IEC 6282031:2017.The UK participation in its preparation was entrusted to Technical Committee GW/1/1, Alarm components.A list of organizations represented on this committee can be obtained on requ
9、est to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 93797 2ICS 13.320Compliance with a British Sta
10、ndard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 6282031:2018EUROPEAN STANDARD NORME EU
11、ROPENNE EUROPISCHE NORM EN IEC 62820-3-1 June 2018 ICS 13.320 English Version Building intercom systems - Part 3-1: Application guidelines - General (IEC 62820-3-1:2017) Systmes dinterphone de btiment - Partie 3-1: Lignes directrices dapplication - Gnralits (IEC 62820-3-1:2017) Gebude-Sprechanlagen
12、- Teil 3-1: Generelle Anwendungsrichtlinien (IEC 62820-3-1:2017) This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand
13、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version i
14、n any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croa
15、tia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerla
16、nd, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in
17、any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62820-3-1:2018 E BS EN IEC 6282031:2018EN IEC 62820-3-1:2018 2 European foreword The text of document 79/599/FDIS, future edition 1 of IEC 62820-3-1, prepared by IEC/TC 79 “Alarm and electronic security systems“ was su
18、bmitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62820-3-1:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-12-22 latest date by which
19、 the national standards conflicting with the document have to be withdrawn (dow) 2021-06-22 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endor
20、sement notice The text of the International Standard IEC 62820-3-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60529:1989 NOTE Harmonized as EN 60529:199
21、1 (not modified). IEC 60529:1989/A1:1999 NOTE Harmonized as EN 60529:1991/A1:2000 (not modified). IEC 60529:1989/A2:2013 NOTE Harmonized as EN 60529:1991/A2:2013 (not modified). IEC 60839 Series NOTE Harmonized as EN 60839 Series IEC 62262 NOTE Harmonized as EN 62262. BS EN IEC 6282031:2018EN IEC 62
22、820-3-1:2018 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, o
23、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information
24、on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 62820-1-1 2016 Building intercom systems - Part 1-1: System requirements - General EN 62820-1-1 2016 IEC 62820-1-2 - Building intercom systems - Part 1-2: Sy
25、stem requirements - Building intercom systems using the internet protocol (IP) EN 62820-1-2 - IEC 62820-2 - Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS) EN IEC 62820-2 - BS EN IEC 6282031:2018 2 IEC 62820-3-1:2017 IEC 2017 CONTENTS FOREWORD
26、 . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviated terms 7 3.1 Terms and definitions 7 3.2 Abbreviated terms . 8 4 System planning and design 9 4.1 General . 9 4.2 System type selection . 9 4.2.1 General . 9 4.2.2 Functional requirement 9 4.2.3 Performance
27、9 4.2.4 Maintenance 9 4.3 System component selection . 10 4.3.1 General . 10 4.3.2 URU selection . 10 4.3.3 VCU selection 10 4.3.4 SMU selection . 10 4.3.5 Additional AUX 11 4.4 Operational considerations . 11 4.4.1 General . 11 4.4.2 Regulatory requirements 11 4.4.3 Door unlocking 11 4.4.4 System m
28、anagement . 12 4.4.5 Intercom controlled building entrances . 12 4.4.6 System integration and interoperability 12 5 System architecture . 13 6 System installation 13 6.1 General . 13 6.2 Installation 14 6.2.1 Equipment . 14 6.2.2 Medium connections 14 6.2.3 Inspection and functional testing 15 7 Com
29、missioning and system handover 15 7.1 Commissioning . 15 7.2 System handover 16 8 System operation and maintenance . 16 9 Documentation 17 9.1 General . 17 9.2 Documentation for commissioning/ system handover 17 9.3 Documentation for maintenance 18 10 Environmental and EMC considerations . 18 10.1 G
30、eneral . 18 BS EN IEC 6282031:2018IEC 62820-3-1:2017 IEC 2017 3 10.2 Environmental considerations . 18 10.2.1 Enclosure protection capability considerations . 18 10.2.2 Anti-vandalism capability considerations 18 10.3 EMC considerations 18 Bibliography 20 Figure 1 Architecture of a BIS 13 BS EN IEC
31、6282031:2018 4 IEC 62820-3-1:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ BUILDING INTERCOM SYSTEMS Part 3-1: Application guidelines General FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotec
32、hnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specification
33、s, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, g
34、overnmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisio
35、ns or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internat
36、ional use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order
37、 to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clear
38、ly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bo
39、dies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, proper
40、ty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in th
41、is publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any o
42、r all such patent rights. International Standard IEC 62820-3-1 has been prepared by IEC technical committee 79: Alarm and electronic security systems. The text of this International Standard is based on the following documents: FDIS Report on voting 79/599/FDIS 79/600/RVD Full information on the vot
43、ing for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62820 series, published under the general title Building intercom sy
44、stems, can be found on the IEC website. BS EN IEC 6282031:2018IEC 62820-3-1:2017 IEC 2017 5 The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific docum
45、ent. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN IEC 6282031:2018 6 IEC 62820-3-1:2017 IEC 2017 INTRODUCTION This part 3-1 of the IEC 62820 series of standards provides application guidelines for building intercom systems. The other par
46、ts of this series of standards are as follows: Part 1-1: System requirements General Part 1-2: System requirements Building intercom systems using the Internet Protocol (IP) Part 2: Requirements for advanced security building intercom systems (ASBIS) Part 3-1: Application guidelines General Part 3-2
47、: Application guidelines Advanced security building intercom systems (ASBIS) This part describes general recommendations for planning, installation, operation, maintenance and documentation for the application of building intercom systems. The recommendations of part 3-1 are specifically intended fo
48、r large-scale systems. Where an installation is intended to meet the requirements of IEC 62820-2, the recommendations of IEC 62820-3-2 should also be applied. The implementation of building intercom systems (BIS) should be in accordance with the following sequence: system planning and design; system
49、 installation; commissioning and system handover; system operation and maintenance. Separate guidance is provided for each activity along with recommendations for documentation needed. A brief description of each clause covering the activities is provided below: System planning and design: this clause is intended to assist the designer with the selection of the type of BIS and system component of the BIS which best meet the BIS implementation and user requir
