1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Measurement techniques of piezoelectric, dielectric and electrostatic oscillatorsPart 3: Frequency aging test methodsBS EN IEC 62884-3:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62884-3 May 2018 ICS 31
2、.140 English Version Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods (IEC 62884-3:2018) Techniques de mesure des oscillateurs pizolectriques, dilectriques et lectrostatiques Partie 3 : Mthodes dessai de vieillissement en frquen
3、ce (IEC 62884-3:2018) Messverfahren fr piezoelektrische, dielektrische und elektrostatische Oszillatoren - Teil 3: Prfverfahren fr die Frequenzalterung (IEC 62884-3:2018) This European Standard was approved by CENELEC on 2018-04-26. CENELEC members are bound to comply with the CEN/CENELEC Internal R
4、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENEL
5、EC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official
6、versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta
7、, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CE
8、NELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62884-3:2018 E National forewordThis British Standard is the UK implementation of EN IEC 62884-3:2018. It is ide
9、ntical to IEC 62884-3:2018.The UK participation in its preparation was entrusted to Technical Committee EPL/49, Piezoelectric devices for frequency control and selection.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purpor
10、t to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 93238 0ICS 31.140Compliance with a British Standard cannot confer immunity from legal obligations.
11、This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 62884-3:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62884-3 May 2018 ICS 31
12、.140 English Version Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods (IEC 62884-3:2018) Techniques de mesure des oscillateurs pizolectriques, dilectriques et lectrostatiques Partie 3 : Mthodes dessai de vieillissement en frquen
13、ce (IEC 62884-3:2018) Messverfahren fr piezoelektrische, dielektrische und elektrostatische Oszillatoren - Teil 3: Prfverfahren fr die Frequenzalterung (IEC 62884-3:2018) This European Standard was approved by CENELEC on 2018-04-26. CENELEC members are bound to comply with the CEN/CENELEC Internal R
14、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENEL
15、EC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official
16、versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta
17、, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CE
18、NELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62884-3:2018 E BS EN IEC 62884-3:2018EN IEC 62884-3:2018 (E) 2 European foreword The text of document 49/1248/CD
19、V, future edition 1 of IEC 62884-3, prepared by IEC/TC 49 “Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62884-3:2018. The following dates a
20、re fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-01-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-04-26 Attention is drawn t
21、o the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62884-3:2018 was approved by CENELEC as a European Stan
22、dard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-1 NOTE Harmonized as EN 60068-1. IEC 60068-2-14 NOTE Harmonized as EN 60068-2-14. IEC 60679-4 NOTE Harmonized as EN 60679-4. IEC 60679-5 NOTE Harmoniz
23、ed as EN 60679-5. IEC 61760-1 NOTE Harmonized as EN 61760-1. BS EN IEC 62884-3:2018EN IEC 62884-3:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that s
24、ome or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common
25、 modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60027 series Letter symbols to be used in electrical technology
26、 - Part 1: General EN 60027 series IEC 60050-561 - International Electrotechnical Vocabulary (IEV) - Chapter 561: Piezoelectric devices for frequency control and selection - - IEC 60469 - Transitions, pulses and related waveforms - Terms, definitions and algorithms EN 60469 - IEC 60617 - Standard da
27、ta element types with associated classification scheme for electric components - Part 4: IEC reference collection fo standard data element types and component classes - - IEC 60679-1 - Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1 : Generic specification EN 606
28、79-1 - IEC 62884-1 2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement EN 62884-1 2017 ISO 80000-1 - Quantities and units - Part 1: General EN ISO 80000-1 - BS EN IEC 62884-3:2018 2 IEC 62884-3:2018 IEC 2018 CONTENTS FORE
29、WORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions, units and symbols 6 3.1 Terms and definitions 6 3.2 Units and symbols. 7 4 Frequency aging test . 7 4.1 General . 7 4.2 Test and measurement conditions . 7 4.2.1 General . 7 4.2.2 Active aging test (non-destructive
30、) . 7 4.2.3 Data fitting . 8 4.2.4 Accelerated aging (non-active) 9 4.2.5 Extended aging 10 Annex A (normative) Experimental verification of the frequency aging performance . 11 Bibliography 13 Table 1 Measurement parameters depending on the oscillator type . 8 Table 2 Time acceleration factors for
31、Ea= 0,38 eV 10 Table A.1 Procedure for the determination of the frequency aging parameters . 12 BS EN IEC 62884-3:2018IEC 62884-3:2018 IEC 2018 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS Part 3: Frequency aging test
32、 methods FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardizati
33、on in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is en
34、trusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Inte
35、rnational Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since
36、 each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content o
37、f IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in
38、 their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity ass
39、essment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, emp
40、loyees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of t
41、he publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the
42、 possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62884-3 has been prepared by IEC technical committee 49: Piezoelectric, dielectric and elect
43、rostatic devices and associated materials for frequency control, selection and detection. The text of this International Standard is based on the following documents: CDV Report on voting 49/1248/CDV 49/1272/RVC Full information on the voting for the approval of this International Standard can be fo
44、und in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN IEC 62884-3:2018 4 IEC 62884-3:2018 IEC 2018 A list of all parts in the IEC 62884 series, published under the general title Measurement techniques of piez
45、oelectric, dielectric and electrostatic oscillators, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. A
46、t this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. BS EN IEC 62884-3:2018IEC 62884-3:2018 IEC 2018 5 INTRODUCTION This document was developed from the works related to IEC 60679-1
47、:2007 (third edition), the measurement techniques of which were restructured into different parts under a new project reference. This document describes the measurement method for frequency aging only. BS EN IEC 62884-3:2018 6 IEC 62884-3:2018 IEC 2018 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELEC
48、TRIC AND ELECTROSTATIC OSCILLATORS Part 3: Frequency aging test methods 1 Scope This part of IEC 62884 describes the methods for the measurement and evaluation of frequency aging tests of piezoelectric, dielectric and electrostatic oscillators, including Dielectric Resonator Oscillators (DRO) and os
49、cillators using FBAR (hereinafter referred to as “Oscillator“). The purpose of those tests is to provide statistical data supporting aging predictions. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies
