1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Piezoelectric sensorsPart 1: Generic specifications (IEC 63041-1:2017)BS EN IEC 63041-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 63041-1 March 2018 ICS 31.140 English Version Piezoelectric sensors -
2、Part 1: Generic specifications (IEC 63041-1:2017) Capteurs pizoelectriques - Partie 1: Spcifications gnriques (IEC 63041-1:2017) Piezoelektrische Sensoren - Teil 1: Fachgrundspezifikation (IEC 63041-1:2017) This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to co
3、mply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENEL
4、EC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre
5、has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
6、Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee
7、 fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 63041-1:2018 E National forewordThis British Standard is the UK implementati
8、on of EN IEC 630411:2018. It is identical to IEC 630411:2017.The UK participation in its preparation was entrusted to Technical Committee EPL/49, Piezoelectric devices for frequency control and selection.A list of organizations represented on this committee can be obtained on request to its secretar
9、y.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 93405 6ICS 31.140Compliance with a British Standard cannot confer
10、 immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 630411:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE
11、NORM EN IEC 63041-1 March 2018 ICS 31.140 English Version Piezoelectric sensors - Part 1: Generic specifications (IEC 63041-1:2017) Capteurs pizoelectriques - Partie 1: Spcifications gnriques (IEC 63041-1:2017) Piezoelektrische Sensoren - Teil 1: Fachgrundspezifikation (IEC 63041-1:2017) This Europe
12、an Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
13、concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENEL
14、EC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav
15、Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical S
16、tandardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. E
17、N IEC 63041-1:2018 E BS EN IEC 630411:2018EN IEC 63041-1:2018 (E) 2 European foreword The text of document 49/1220/CDV, future edition 1 of IEC 63041-1, prepared by IEC/TC 49 “Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection“
18、 was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 63041-1:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-10-17 latest date by
19、which the national standards conflicting with the document have to be withdrawn (dow) 2021-01-17 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
20、Endorsement notice The text of the International Standard IEC 63041-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068 (series) NOTE Harmonized as EN 60
21、068 (series). IEC 60122-1 NOTE Harmonized as EN 60122-1. IEC 60444-1 NOTE Harmonized as EN 60444-1. IEC 60444-5 NOTE Harmonized as EN 60444-5. IEC 60689 NOTE Harmonized as EN 60689. IEC 60758:2016 NOTE Harmonized as EN 60758:2016 (not modified). IEC 60862-1 NOTE Harmonized as EN 60862-1. IEC 61019-1
22、 NOTE Harmonized as EN 61019-1. IEC 61240:2016 NOTE Harmonized as EN 61240:2017 (not modified). IEC 61760 (series) NOTE Harmonized as EN 61760 (series). IEC 61837 (series) NOTE Harmonized as EN 61837 (series) IEC 62276:2016 NOTE Harmonized as EN 62276:2016 (not modified). ISO 80000 (series) NOTE Har
23、monized as EN ISO 80000 (series). BS EN IEC 630411:2018EN IEC 63041-1:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content
24、constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by
25、 (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60027 series Letter symbols to be used in electrical technology - Part 1: General EN 60027
26、series IEC 60050-561 2014 International electrotechnical vocabulary - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - - IEC 60122-2-1 - Quartz crystal units for frequency control and selection. Part 2: Guide for
27、the use of quartz crystal units for frequency control and selection -. Section one : Quartz crystal units for microprocessor clock supply - - IEC 60444-9 - Measurement of quartz crystal unit parameters - Part 9: Measurement of spurious resonances of piezoelectric crystal units EN 60444-9 - IEC 60617
28、 - Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection fo standard data element types and component classes - - ISO 2859-1 1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance q
29、uality limit (AQL) for lot-by-lot inspection - - ISO 80000-1 2009 Quantities and units - Part 1: General EN ISO 80000-1 2013 BS EN IEC 630411:2018 2 IEC 63041-1:2017 IEC 2017 CONTENTS FOREWORD . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 3.1 General . 6 3.2 Piezoelectric sensors
30、7 3.3 Types of chemical sensors 7 3.4 Types of physical sensors . 8 4 Symbols of sensor elements 8 4.1 General . 8 4.2 Symbol for sensor elements of BAW resonator type 9 4.3 Symbol for sensor elements of SAW resonator type 9 4.4 Symbol for sensor elements of SAW delay-line type 10 4.5 Symbol for sen
31、sor elements of non-acoustic type 10 4.6 Symbols 10 5 Specifications 11 5.1 Sensor elements . 11 5.1.1 General . 11 5.1.2 Sensor elements of resonator and delay-line types 11 5.1.3 Sensor elements of non-acoustic type . 12 5.2 Frequency ranges . 12 5.3 Level of drive or input power . 12 5.4 Unwanted
32、 response 12 5.5 Analysis of measurements 12 5.6 Enclosure . 13 5.7 Performance confirmation . 13 5.8 Long-term and short-term stabilities 13 6 Measurement and detection methods 13 7 Delivery conditions 13 7.1 Marking . 13 7.2 Wrapping 13 7.3 Packaging . 13 8 Quality and reliability . 14 8.1 Reuse .
33、 14 8.2 Validity of release . 14 8.3 Test procedures 14 8.4 Screening requirements 14 8.5 Unchecked parameters . 14 9 Test and measurement procedures 14 9.1 General . 14 9.1.1 Classification of tests . 14 9.1.2 Shipping test . 14 9.1.3 Mechanical and environmental test 14 9.2 Test and measurement co
34、nditions . 15 9.2.1 Standard conditions for testing 15 9.2.2 Equilibrium state 15 BS EN IEC 630411:2018IEC 63041-1:2017 IEC 2017 3 9.2.3 Power supply . 15 9.2.4 Alternative test system 15 9.2.5 Visual inspection . 16 9.3 Test conditions for shipment . 16 9.3.1 Temperature dependence of frequency, ph
35、ase, insertion loss/gain, motional resistance, and electric charge / voltage 16 9.3.2 Unwanted response . 16 9.3.3 Shunt capacitance . 16 9.3.4 Insulation resistance 16 Annex A (normative) Measurement methods 17 A.1 General . 17 A.2 Measurement methods using reflection and transmission characteristi
36、cs 17 A.3 Measurement methods using oscillation circuits 18 A.4 Measurement method of non-acoustic type sensor elements and cells 19 A.5 Other measurement methods 19 Annex B (normative) Detection methods 20 B.1 General . 20 B.2 Detection methods 20 B.2.1 Frequency difference measurement . 20 B.2.2 I
37、nsertion loss/gain measurement . 21 B.2.3 Phase difference measurement 21 B.2.4 Other detection methods 22 Bibliography 23 Figure 1 Conceptual diagrams for sensor elements of BAW resonator type 9 Figure 2 Symbol for sensor elements of BAW resonator type . 9 Figure 3 Conceptual diagram of sensor elem
38、ents of SAW resonator type . 9 Figure 4 Symbol for sensor elements of SAW resonator type . 9 Figure 5 Conceptual diagram for sensor elements of SAW delay-line type . 10 Figure 6 Symbol for sensor elements of SAW delay-line type . 10 Figure 7 Conceptual diagrams for sensor elements of non-acoustic ty
39、pe 10 Figure 8 Symbol for sensor elements of non-acoustic type . 10 Figure A.1 Measurement method using reflection characteristics of BAW resonator type sensor elements and cells . 17 Figure A.2 Measurement method using reflection characteristics of SAW resonator type sensor elements and cells . 17
40、Figure A.3 Measurement method using transmission characteristics of SAW delay-line type sensor elements and cells 18 Figure A.4 Measurement method using oscillation circuit consisting of BAW resonator type sensor elements and cells . 18 Figure A.5 Measurement method using oscillation circuit consist
41、ing of SAW resonator type sensor elements and cells . 18 Figure A.6 Measurement method using oscillation circuit consisting of SAW delay-line type sensor elements and cells 19 Figure A.7 Measurement method using amplifier consisting of non-acoustic type sensor elements and cells . 19 Figure B.1 Meas
42、urement of frequency difference using two oscillation circuits . 20 BS EN IEC 630411:2018 4 IEC 63041-1:2017 IEC 2017 Figure B.2 Measurement of frequency difference using an oscillation circuit and frequency synthesizer . 21 Figure B.3 Measurement of insertion loss/gain difference using two oscillat
43、ion circuits 21 Figure B.4 Measurement of phase difference using signal generator and phase detector 22 BS EN IEC 630411:2018IEC 63041-1:2017 IEC 2017 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PIEZOELECTRIC SENSORS Part 1: Generic specifications FOREWORD 1) The International Electrotechnical Com
44、mission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
45、 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee
46、 interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accorda
47、nce with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all inter
48、ested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsi
49、ble for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation
