1、BRITISH STANDARD BS EN ISO 1043-4:1999Plastics Symbols and abbreviated terms Part 4: Flame retardantsICS 01.040.83; 83.040.30+A1:2016(ISO 1043-4:1998/Amd 1:2016)National forewordThis British Standard is the UK implementation of EN ISO 1043-4:1999+A1:2016. It is identical to ISO 1043-4:1998, incorpor
2、ating amendment 1:2016. It supersedes BS EN ISO 1043-4:1999 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to ISO text carry the number of the ISO amendment. For example, text altered by ISO amendment 1 is
3、indicated by !“.The UK participation in its preparation was entrusted to Technical Committee PRI/10, Terminology for rubbers and plastics.A list of organizations represented on this committee can be obtained on request to its secretary.A British Standard does not purport to include all the necessary
4、 provisions of a contract. Users of British Standards are responsible for their correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN ISO 1043-4:1999+A1:2016This British Standard, havingbeen prepared under thedirection of the SectorCommittee for M
5、aterials andChemicals, was publishedunder the authority of theStandards Committee andcomes into effect on15 August 1999 The British Standards Institution 2016. Published by BSI Standards Limited 2016Amendments/corrigenda issued since publicationDate Comments 31 May 2016 Implementation of ISO amendme
6、nt 1:2016 with CEN endorsement A1:2016ISBN 978 0 580 88515 0EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 1043-4:1999+A1ICS83.040.30; 83.080.01English versionPlastics Symbols and abbreviated terms Part 4: Flame retardants(ISO 1043-4:1998/Amd 1:2016)Plastiques Symboles et abrviations Partie 4
7、: Ignifuges (ISO 1043-4:1998)Kunststoffe Kennbuchstaben und Kurzzeichen Teil 4: Flammschutzmittel (ISO1043-4:1998)This European Standard was approved by CEN on18 April1999.CEN members are bound to comply with the CEN/CENELEC InternalRegulations which stipulate the conditions for giving this European
8、 Standardthe status of a national standard without any alteration. Up-to-date lists andbibliographical references concerning such national standards may be obtainedon application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French
9、,German). A version in any other language made by translation under theresponsibility of a CEN member into its own language and notified to theCentral Secretariat has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark,
10、Finland, France, Germany, Greece, Iceland,Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and UnitedKingdom.CENEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungCentral Secretariat: rue de Stassart 36, B-1050 Brusse
11、ls1999 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nationalMembers. Ref. No. EN ISO1043-4:1999 EApril 2016EN ISO 1043-4:1999+A1:2016 BSI 03-2000ForewordThe text of the International Standard from Technical Committee ISO/TC61 “Plastics” of the International
12、Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC249 “Plastics”, the secretariat of which is held by IBN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsemen
13、t, at the latest by November1999, and conflicting national standards shall be withdrawn at the latest by November1999.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cz
14、ech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom.Endorsement noticeThe text of the International Standard ISO1043-4:1998 has been approved by CEN as a European Standard withou
15、t any modification.NOTENormative references to International Standards are listed inAnnex ZA (normative).BS EN ISO 1043-4:1999+A1:2016Foreword to amendment A1This document (EN ISO 1043-4:1999/A1:2016) has been prepared by Technical Committee ISO/TC 61 “Plastics” in collaboration with Technical Commi
16、ttee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.This Amendment to the European Standard EN ISO 1043-4:1999 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2016, and conflicting national standa
17、rds shall be withdrawn at the latest by October 2016.According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finlan
18、d, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO 1
19、043-4:1998/Amd 1:2016 has been approved by CEN as EN ISO 1043-4:1999/A1:2016 without any modification.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such
20、 patent rights.iiiii BSI 03-2000ContentsPageForeword iv1 Scope 12 Normative references 13 Definition 14 Application of symbols 15 Code numbers for flame retardants 2Annex ZA (normative) Normative references to international publications with their relevant European publications 4Descriptors: Plastic
21、s, flame proofing, retardants, symbols, abbreviations, designation, numeric codes.EN ISO 1043-4:1999+A1:2016BS EN ISO 1043-4:1999+A1:2016ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing
22、International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaiso
23、n with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication a
24、s an International Standard requires approval by at least75% of the member bodies casting a vote.International Standard ISO1043-4 was prepared by Technical Committee ISO/TC61, Plastics, Subcommittee SC1, Terminology.ISO1043 consists of the following parts, under the general title Plastics Symbols an
25、d abbreviated terms: Part 1: Basic polymers and their special characteristics; Part 2: Fillers and reinforcing materials; Part 3: Plasticizers; Part 4: Flame retardants.iv BSI 03-2000EN ISO 1043-4:1999+A1:2016BS EN ISO 1043-4:1999+A1:2016This page deliberately left blank BSI 03-2000 11 ScopeThis par
26、t of ISO1043 provides uniform symbols for flame retardants added to plastics materials. The symbols are written with the abbreviated term “FR” and one or more succeeding code numbers as given in clause5. They are used in addition to the symbols for the plastics materials, for plastics material desig
27、nation and for identification and marking of plastics products.2 Normative referencesThe following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO1043. At the time of publication, the editions indicated were valid. All standards are subje
28、ct to revision, and parties to agreements based on this part of ISO1043 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.ISO 1043-1:1997, Plastics
29、Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics. ISO 1043-2:1988, Plastics Symbols Part 2: Fillers and reinforcing materials. ISO 1043-3:1996, Plastics Symbols and abbreviated terms Part 3: Plasticizers. 3 DefinitionFor the purposes of this part of ISO1043, the
30、 following definition applies:3.1 flame retardanta substance that markedly retards the propagation of a flameNOTEIncluded are flame retardants that are incorporated in prepolymers.4 Application of symbolsThe symbols are written with the abbreviated term “FR”, in capital letters, followed, without a
31、space, by a two-digit code number enclosed in parentheses and selected, as appropriate, from the list given in clause5. Only flame retardants exceeding1% (m/m) have to be identified. These symbols are used in addition to the symbols for a plastics material derived from parts1,2 and3 of ISO1043.EXAMP
32、LE 1: EXAMPLE 2: EN ISO 1043-4:1999+A1:2016BS EN ISO 1043-4:1999+A1:20162 BSI 03-20005 Code numbers for flame retardantsThe code numbers are grouped according to the chemical composition of the flame retardant.NOTEAdditional materials will be coded as required and will form amendments to this part o
33、f ISO1043.Halogenated compounds:Code10 aliphatic/alicyclic chlorinated compounds11 aliphatic/alicyclic chlorinated compounds in combination with antimony compounds12 aromatic chlorinated compounds13 aromatic chlorinated compounds in combination with antimony compounds14 aliphatic/alicyclic brominate
34、d compounds (excluding hexabromocyclododecane)15 aliphatic/alicyclic brominated compounds (excluding hexabromocyclododecane) in combination16 aromatic brominated compounds (excluding brominated diphenyl ether and biphenyls)17 aromatic brominated compounds (excluding brominated diphenyl ether and bip
35、henyls) in combination with antimony compounds18 polybrominated diphenyl ether19 polybrominated diphenyl ether in combination with antimony compounds20 polybrominated biphenyls21 polybrominated biphenyls in combination with antimony compounds22 aliphatic/alicyclic chlorinated and brominated compound
36、s2325 aliphatic fluorinated compounds26 to 29 not allocatedNitrogen compounds:Code30 nitrogen compounds (confined to melamine, melamine cyanurate, urea)31 to 39 not allocatedOrganic phosphorus compounds:Code40 halogen-free organic phosphorus compounds41 chlorinated organic phosphorus compounds42 bro
37、minated organic phosphorus compounds43 to 49 not allocatedInorganic phosphorus compounds:Code50 ammonium orthophosphates51 ammonium polyphosphates52 red phosphorus53 to 59 not allocatedMetal oxides, metal hydroxides, metal salts:Code60 aluminium hydroxide61 magnesium hydroxide62 antimony(III) oxide6
38、3 alkali-metal antimonate64 magnesium/calcium carbonate hydrate65 to 69 not allocated!“with antimony compoundshexabromocyclododecane24 hexabromocyclododecane with antimony compounds!“EN ISO 1043-4:1999+A1:2016BS EN ISO 1043-4:1999+A1:2016 BSI 03-2000 3Boron and zinc compounds:Code70 inorganic boron
39、compounds71 organic boron compounds72 zinc borate73 organic zinc compounds74 not allocatedSilica compounds:Code75 inorganic silicon compounds76 organic silicon compounds (silicones)77 to 79 not allocatedCode80 graphite81 to 89 not allocatedCode90 to 99 not allocated! “! “EN ISO 1043-4:1999+A1:2016BS
40、 EN ISO 1043-4:1999+A1:20164 BSI 03-2000Annex ZA (normative) Normative references to international publications with their relevant European publicationsThis European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the
41、appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the p
42、ublication referred to applies.Publication Year Title EN YearISO 1043-1 1997 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristicsEN ISO 1043-1 1999ISO 1043-3 1996 Plastics Symbols and abbreviated terms Part 3: PlasticizersEN ISO 1043-3 1999EN ISO 1043-4:199
43、9+A1:2016BS EN ISO 1043-4:1999+A1:2016BSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limi
44、ted.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable form
45、at and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by vi
46、siting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you n
47、eed international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person o
48、r entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any ot
49、her person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only
