EN ISO 105-X16-2002 Textiles - Tests for colour fastness - Part X16 Color fastness to rubbing - Small areas《纺织品 色牢度试验 第X16部分 耐摩擦色牢度 小面积［ISO 105-X16-2001］》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 4657-1982 Grub Screws with Thrust Point《无头止推端螺钉》.pdf

CNS 4658-1984 Tommy Screws with Fixed Clamping Bolt《贯头螺钉（固定扳杆型）》.pdf

CNS 4659-1984 Tommy Screws with Movable Clamping Bolt《贯头螺钉（滑动扳杆型）》.pdf

CNS 4660-1984 Tommy Nuts with Fixed Clamping Bolt《贯头螺帽（固定扳杆型）》.pdf

CNS 4661-1984 Tommy Nuts with Movable Clamping Bolt《贯头螺帽（滑动扳杆型）》.pdf

CNS 4662-1984 Open Insert Nuts for Plastics Mouldings《嵌入螺帽（嵌于塑料制品内）》.pdf

CNS 4663-1984 Closed Insert Nuts with Disk for Plastics Mouldings《嵌入螺帽（片封式，嵌于塑料制品内）》.pdf

CNS 4664-1984 Closed Insert Nuts with Dead Hole for Plastics Mouldings《嵌入螺帽（封闭式，嵌于塑料制品内）》.pdf

CNS 4665-1984 Insert Nuts Heavy Type for Plastics Mouldings and Pressure Die Castings with Dead Hole《嵌入螺帽（长型封闭式，嵌于塑料制品与压铸件内用）》.pdf