1、BSI Standards PublicationBS EN ISO 1452-3:2010Plastics piping systems forwater supply and for buriedand above-ground drainageand sewerage under pressure Unplasticized poly(vinylchloride) (PVC-U)Part 3: Fittings (ISO 1452-3:2009, correctedversion 2010-03-01)BS EN ISO 1452-3:2010Incorporating corrigen
2、dum August 2015BS EN ISO 1452-3:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 1452-3:2010. It is identical to ISO 1452-3:2009. It supersedes BS EN ISO 1452-3:2009 which is withdrawn.The UK participation in its preparation was entrusted by Technical Co
3、mmittee PRI/88, Plastics piping systems, to Subcommittee PRI/88/2, Plastics piping for pressure applications.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. User
4、s are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 91512 3ICS 23.040.20; 23.040.45; 91.140.60; 93.025Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was pu
5、blished under the authority of the Standards Policy and Strategy Committee on 31 January 2012.Amendments/corrigenda issued since publicationDate Text affected31 August 2015 Implementation of ISO corrected text 1 March 2010: Figure 8 c) updated.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO
6、 1452-3 October 2010 ICS 93.025; 91.140.60; 23.040.20; 23.040.45 Supersedes EN ISO 1452-3:2009English Version Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009
7、, corrected version 2010-03-01) Systmes de canalisations en plastique pour lalimentation en eau, pour branchements et collecteurs dassainissement enterrs et ariens avec pression - Poly(chlorure de vinyle) non plastifi (PVC-U) - Partie 3: Raccords (ISO 1452-3:2009, version corrige 2010-03-01) Kunstst
8、off-Rohrleitungssysteme fr die Wasserversorgung und fr erdverlegte und nicht erdverlegte Entwsserungs- und Abwasserdruckleitungen - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 3: Formstcke (ISO 1452-3:2009, korrigierte Fassung 2010-03-01) This European Standard was approved by CEN on 23 Septem
9、ber 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obt
10、ained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Manag
11、ement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherl
12、ands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in
13、 any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1452-3:2010: EBS EN ISO 1452-3:2010EN ISO 1452-3:2010 (E) 3 Foreword The text of ISO 1452-3:2009, corrected version 2010-03-01 has been prepared by Technical Committee ISO/TC 138 “Plastics pipes, fittings and val
14、ves for the transport of fluids” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 1452-3:2010 by Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN. This European Standard shall be given th
15、e status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the s
16、ubject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 1452-3:2009. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implem
17、ent this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swit
18、zerland and the United Kingdom. Endorsement notice The text of ISO 1452-3:2009, corrected version 2010-03-01 has been approved by CEN as a EN ISO 1452-3:2010 without any modification. BS EN ISO 1452-3:2010EN ISO 1452-3:2010 (E)BS EN ISO 1452-3:2010ISO 1452-3:2009(E) ISO 2009 All rights reserved iiiC
19、ontents Page Foreword iv Introduction.v 1 Scope1 2 Normative references2 3 Terms, definitions, symbols and abbreviated terms .3 3.1 Terms and definitions .3 3.2 Symbols3 4 Material .3 4.1 Fitting material.3 4.2 Density3 4.3 MRS-value 4 5 General characteristics.4 5.1 Appearance 4 5.2 Colour .4 5.3 O
20、pacity of fittings intended for the above-ground conveyance of water4 6 Geometrical characteristics .4 6.1 Measurement of dimensions4 6.2 Nominal diameters 4 6.3 Fittings for solvent cementing .4 6.4 Adapter fittings 12 6.5 Tapping saddles 14 6.6 Flange adapters and flanges17 6.7 Elastomeric ring se
21、al fittings .20 6.8 End-load-bearing double-sockets with elastomeric seals29 7 Classification and operating conditions.29 7.1 Classification .29 7.2 Selection of nominal pressure and pipe series S for water up to and including 25 C .29 7.3 Determination of the allowable operating pressure for water
22、up to 45 C 30 8 Mechanical characteristics.30 8.1 Resistance to internal pressure of fittings or parts of fittings .30 8.2 Crushing test .31 9 Physical characteristics31 10 Sealing rings 32 11 Adhesives.32 12 Performance requirements.32 13 Marking.32 13.1 General .32 13.2 Minimum required marking 32
23、 13.3 Additional marking 33 Annex A (normative) Imperial(inch)-sized fittings.34 Bibliography37 BS EN ISO 1452-3:2010ISO 1452-3:2009(E)BS EN ISO 1452-3:2010ISO 1452-3:2009(E) iv ISO 2009 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of
24、 national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Int
25、ernational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with t
26、he rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval
27、by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1452-3 was prepared by the European Committ
28、ee for Standardization (CEN) Technical Committee CEN/TC 155, Plastics piping systems and ducting systems, in collaboration with ISO Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 2, Plastics pipes and fittings for water supplies, in a
29、ccordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This first edition cancels and replaces ISO 4422-3:1996, ISO 264:1976, ISO 264:1976/Add.1:1982, ISO 2045:1988, ISO 2048:1990, ISO 3460:1975, ISO 4434:1977 and ISO 6455:1983, which have been technically revi
30、sed. ISO 1452 consists of the following parts, under the general title Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U): Part 1: General Part 2: Pipes Part 3: Fittings Part 4: Valves Part 5: Fitne
31、ss for purpose of the system Guidance for the assessment of conformity is to form the subject of a part 7. BS EN ISO 1452-3:2010ISO 1452-3:2009(E)This corrected version of ISO 1452-3:2009 incorporates the correction of Figure 8 c).BS EN ISO 1452-3:2010ISO 1452-3:2009(E) ISO 2009 All rights reserved
32、vIntroduction The System Standard, of which this is Part 3, specifies the requirements for a piping system and its components made from unplasticized poly(vinyl chloride) (PVC-U). The piping system is intended to be used for water supply and for buried and above-ground drainage and sewerage under pr
33、essure. In respect of potential adverse effects on the quality of water intended for human consumption, caused by the products covered by this part of ISO 1452, the following are relevant. a) This part of ISO 1452 provides no information as to whether the products may be used without restriction. b)
34、 Existing national regulations concerning the use and/or the characteristics of these products remain in force. Requirements and test methods for material and components, other than fittings, are specified in ISO 1452-1, ISO 1452-2 and ISO 1452-4. Characteristics for fitness for purpose (mainly for
35、joints) are established in ISO 1452-5. This part of ISO 1452 specifies the characteristics of fittings. Guidance for installation is given in ISO/TR 41911. Guidance for the assessment of conformity is provided in ENV 1452-72. For the convenience of users of this part of ISO 1452, marking on fittings
36、 and flanges according to withdrawn International Standards (e.g. ISO 4422-3:1996) may be considered valid for a period, e.g. up to three years from the date of publication of this part of ISO 1452. BS EN ISO 1452-3:2010ISO 1452-3:2009(E)BS EN ISO 1452-3:2010BS EN ISO 1452-3:2010BS EN ISO 1452-3:201
37、0INTERNATIONAL STANDARD ISO 1452-3:2009(E) ISO 2009 All rights reserved 1Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 3: Fittings 1 Scope This part of ISO 1452 specifies the characteristi
38、cs of fittings made from unplasticized poly(vinyl chloride) (PVC-U) for piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure. It also specifies the test parameters for the test methods referred to in this part of ISO 1452. In conjunction with
39、ISO 1452-1, ISO 1452-2 and ISO 1452-5, it is applicable to PVC-U fittings and to joints with components of PVC-U, other plastics and non-plastics materials intended to be used for the following: a) water mains and services buried in the ground; b) conveyance of water above ground for both outside an
40、d inside buildings; c) buried and above-ground drainage and sewerage under pressure. It is applicable to fittings in piping systems intended for the supply of water under pressure up to and including 25 C (cold water), intended for human consumption and for general purposes as well as for waste wate
41、r under pressure. This part of ISO 1452 is also applicable to components for the conveyance of water and waste water up to and including 45 C. For temperatures between 25 C and 45 C, Figure A.1 of ISO 1452-2:2009 applies. NOTE 1 The producer and the end-user can come to agreement on the possibilitie
42、s of use for temperatures above 45 C on a case-by-case basis. Depending on the jointing method, this part of ISO 1452 is applicable to the following types of fittings: fittings for solvent cementing; elastomeric ring seal fittings. PVC-U fittings can be manufactured by injection-moulding and/or be f
43、abricated from pipe. This part of ISO 1452 is also applicable to PVC-U flange adapters and to the corresponding flanges made from various materials. This part of ISO 1452 covers a range of fitting sizes and pressure classes and gives requirements concerning colours. NOTE 2 It is the responsibility o
44、f the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. BS EN ISO 1452-3:2010BS EN ISO 1452-3:2010ISO 1452-3:2009(E) 2 ISO 2009 All rights reserved
45、2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 7-1:1994, Pipe threads
46、 where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation ISO 580, Plastics piping and ducting systems Injecti on-moulded thermoplastics fittings Methods for visually assessing the effects of heating ISO 1167-1, Thermoplastics pipes, fittings and assemblies
47、for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method ISO 1167-3, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3: Preparation of components ISO 1183-1:2004, Plas
48、tics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method ISO 1452-1:2009, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride)
49、(PVC-U) Part 1: General ISO 1452-2:2009, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 2: Pipes ISO 1452-5, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 5: Fitness for purpose of the system ISO 2507-1:1995, Thermoplastics pipes and fittings Vicat softening temperature
