1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1825:2011Rubber hoses and hoseassemblies for aircraft groundfuelling and defuelling Specification (ISO 1825:2010)BS EN ISO 1825:2011 BRITISH STANDARDNational forewordTh
2、is British Standard is the UK implementation of EN ISO 1825:2011.It is identical to ISO 1825:2010. It supersedes BS EN 1361:2004 whichis withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/66, Rubber and plastics tubing, hoses and hoseassemblies.A list of organi
3、zations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 72616 3ICS 49.100; 83.140.40Compliance with a British Stan
4、dard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2011.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1825 May 2011 ICS 83.14
5、0.40; 49.100 Supersedes EN 1361:2004English Version Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2010) Tuyaux et flexibles en caoutchouc pour le ravitaillement carburant et la vidange des avions au sol - Spcifications (ISO 1825:2010) Gummisch
6、luche und -schlauchleitungen fr die Bodenbetankung und Entleerung von Flugzeugen - Anforderungen (ISO 1825:2010) This European Standard was approved by CEN on 15 April 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europ
7、ean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions
8、 (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Bel
9、gium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COM
10、MITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1825:2011: EBS EN ISO 1825:2011E
11、N ISO 1825:2011 (E) 3 Foreword The text of ISO 1825:2010 has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber products” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 1825:2011 by Technical Committee CEN/TC 218 “Rubber and plastics hose
12、s and hose assemblies” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2011, and conflicting national standards shall be withdrawn at the latest b
13、y November 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1361:2004. According to the CEN/CENELEC I
14、nternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu
15、xembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1825:2010 has been approved by CEN as a EN ISO 1825:2011 without any modification. BS EN ISO 1825:2011ISO 1825:2010(E) ISO 2010 A
16、ll rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Normative references1 3 Terms and definitions .2 4 Classification .3 5 Service reeling diameter.3 6 Materials and construction.3 7 Dimensions and tolerances4 8 Physical properties .5 9 Electrical properties 7 10 Frequency of t
17、esting .8 11 Marking.8 12 Test certificate/report9 13 Cleanliness.9 14 Protection for dispatch and storage9 Annex A (normative) Method for determination of fuel-soluble matter 10 Annex B (normative) Method of test for cold embrittlement11 Annex C (normative) Method for determination of adhesion betw
18、een components.12 Annex D (normative) Method for determination of resistance to fuel contamination .13 Annex E (normative) Method of test for flexibility at 20 C 14 Annex F (normative) Method of test for flexibility at 30 C.15 Annex G (normative) Method of test for crush recovery 16 Annex H (normati
19、ve) Method for determination of cyclic kinking resistance 17 Annex I (normative) Flammability test18 Annex J (normative) Hydrostatic tests .20 Annex K (normative) Method of test for vacuum resistance21 Annex L (normative) Method of test for security of attachment of couplings .22 Annex M (normative)
20、 Type testing and routine testing 23 Annex N (informative) Recommended tests for production acceptance testing .24 Annex O (informative) Recommended practice for hose flushing and handling.25 Bibliography27 BS EN ISO 1825:2011ISO 1825:2010(E) iv ISO 2010 All rights reservedForeword ISO (the Internat
21、ional Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has bee
22、n established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical stand
23、ardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for
24、 voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all
25、 such patent rights. ISO 1825 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 1, Hoses (rubber and plastics). This third edition cancels and replaces the second edition (ISO 1825:1996), which has been technically revised (for details, see the Introduction).
26、 BS EN ISO 1825:2011ISO 1825:2010(E) ISO 2010 All rights reserved vIntroduction This specification has been updated to bring it into line with the two most common specifications used for this product in the field, EN 1361:2004 and API 1529, 6th edition. As the 1996 edition of ISO 1825 was closer to
27、EN 1361, EN 1361 was used as the basis for redrafting. Where possible, an attempt has been made to align all three specifications. As a result of this, the following changes have been made to the specification: a) type A (hoses without any special electrical properties) has been eliminated; b) type
28、D (hoses with a conductive cover but without a low-extraction tube compound) has been eliminated; c) there are now four hose types (all with a low-extraction tube); d) a hose flammability test has been introduced; e) a cyclic kinking test has been introduced; f) a flex test at 30 C has been introduc
29、ed; g) the flexibility at room temperature test is carried out at 20 C as opposed to 23 C originally. BS EN ISO 1825:2011BS EN ISO 1825:2011INTERNATIONAL STANDARD ISO 1825:2010(E) ISO 2010 All rights reserved 1Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling Specification
30、 1 Scope This International Standard specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft. All four types are designed for a) use with petroleum fuels having a
31、n aromatic-hydrocarbon content not exceeding 30 % by volume; b) operation within the temperature range of 30 C to +65 C and such that they will be undamaged by climatic conditions of 40 C to +70 C when stored in static conditions; c) operation at up to 2,0 MPa (20 bar) maximum working pressure, incl
32、uding surges of pressure which the hose can be subjected to in service. NOTE 1 Type C hoses are intended for general pressure applications on all vehicles used for plane fuelling. They can also be used for vehicle/rail car loading and discharge where excessive vacuum does not occur. NOTE 2 Type F ho
33、ses can be used for plane delivery applications on vehicles that are also used for defuelling at high flow rates where type C hoses are not suitable. NOTE 3 Type E and F hoses can also be used for vehicle/rail car loading and discharge, for trailer to fueller transfer and for elevation platform supp
34、ly (riser) to provide greater kink resistance. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any
35、amendments) applies. ISO 37, Rubber, vulcanized or thermoplastic Determination of tensile stress-strain properties ISO 188, Rubber, vulcanized or thermoplastic Accelerated ageing and heat resistance tests ISO 1382, Rubber Vocabulary ISO 1402, Rubber and plastics hoses and hose assemblies Hydrostatic
36、 testing ISO 1817:2005, Rubber, vulcanized Determination of the effect of liquids ISO 2230, Rubber products Guidelines for storage ISO 4649:2002, Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum device BS EN ISO 1825:2011ISO 1825:2010(E) 2 IS
37、O 2010 All rights reservedISO 4671, Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies ISO 4672:1997, Rubber and plastics hoses Sub-ambient temperature flexibility tests1)ISO 6246, Petroleum products Gum content of light
38、 and middle distillate fuels Jet evaporation method ISO 7326, Rubber and plastics hoses Assessment of ozone resistance under static conditions ISO 7989-1, Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 1: General principles ISO 7989-2, Steel wire and wire products Non-
39、ferrous metallic coatings on steel wire Part 2: Zinc or zinc-alloy coating ISO 8031, Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity ISO 8033, Rubber and plastics hoses Determination of adhesion between components ISO 8330, Rubber and plastics ho
40、ses and hose assemblies Vocabulary 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 1382 and ISO 8330 and the following apply. 3.1 hose assembly hose with either permanent or reusable end fittings attached 3.2 electrically bonded hose/hose assembly ho
41、se/hose assembly that uses a metallic wire connection to conduct static electricity 3.3 electrically conductive hose/hose assembly hose/hose assembly that is capable of conducting static electrical charges, using a conductive rubber layer, without the use of a metallic wire 1) Under revision as ISO
42、10619-2. BS EN ISO 1825:2011ISO 1825:2010(E) ISO 2010 All rights reserved 34 Classification Hoses for this application are classified into four types and two grades according to their construction and electrical properties. Type Grade Construction B M Electrically bonded, incorporating at least two
43、low-resistance electrically conductivewires and a conductive cover compound. C Electrically conductive, incorporating a conductive cover compound. E M Electrically bonded, incorporating at least one metallic wire helix, at least two low-resistance electrically conductive wires and a conductive cover
44、 compound. Has an enhanced defuelling capability. F Electrically conductive, incorporating at least one non-electrically conductive non-metallic helix and a conductive cover compound. 5 Service reeling diameter Hoses shall be designed for operation on equipment fitted with hose reels of the diameter
45、s given in Table 1. NOTE These hoses remain substantially circular in cross-section when reeled on drums and should not be confused with hoses of the collapsible type that are intended to be reeled flat. Table 1 Service reeling diameters Nominal internal diameter of hose Minimum external diameter of
46、 reeling drum used in service mm 19,0 225 25,0 300 31,5 375 38,0 450 50,0 550 63,0 600 76,0 600 100,0 900 101,5 900 6 Materials and construction 6.1 Hoses If the hose is mandrel-built and vulcanized on a mandrel, particulate-type release agents shall not be used. The hose shall be uniform in quality
47、 and be free from porosity, air holes, foreign inclusions and other defects when inspected visually. BS EN ISO 1825:2011ISO 1825:2010(E) 4 ISO 2010 All rights reservedThe hose shall comprise the following components: a lining of synthetic rubber resistant to petroleum fuel; a reinforcement consistin
48、g of layers of woven, braided or spirally wound textile material; an outer cover made of synthetic rubber which shall be conductive and resistant to abrasion, outdoor exposure and petroleum fuel. For type E and F hoses only, an embedded helix reinforcement shall be included in the construction. For
49、type E hoses, the wire reinforcement used shall be a hard steel and shall have a galvanized finish in accordance with ISO 7989-1 and ISO 7989-2. Types B and E shall also incorporate low-resistance electrically conductive wires to ensure that the hoses are electrically conductive. The cover may have a shallow cloth-marked finish. 6.2 Hose assemblies In order to produce the required electrical properties, the method of attachment of the couplings shall be in accordance with Clause 9. 7 Dim
