1、BS ISOICS 01.040.25; 25.220.40NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDMetallic and otherinorganic coatings Surface treatment,metallic and otherinorganic coatings VocabularyEN 2080:2009National forewordThis British Standard is the UK implementation of EN
2、ISO 2080:2009. It is identical with ISO 2080:2008. It supersedes BS ISO 2080:2008 and BS EN 12508:2000, which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee STI/33, Electrodeposited and related coatings.A list of organizations represented on this committee
3、 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN ISO 2080:2009This British Sta
4、ndard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2008 BSI 2009Amendments/corrigenda issued since publicationDate Comments 31 October 2009 This corrigendum renumbers BS ISO 2080:2008 as BS EN ISO 2080:2009ISBN 978 0 580 65440 4EUROPEAN STANDARDNORME
5、EUROPENNEEUROPISCHE NORMEN ISO 2080May 2009ICS 25.220.40; 01.040.25 Supersedes EN 12508:2000 English VersionMetallic and other inorganic coatings - Surface treatment,metallic and other inorganic coatings - Vocabulary (ISO2080:2008)Revtements mtalliques et autres revtementsinorganiques - Traitement d
6、e surface, revtementsmtalliques et autres revtements inorganiques -Vocabulaire (ISO 2080:2008)Metallische und andere anorganische berzge -Oberflchenbehandlung, metallische und andereanorganische berzge - Wrterbuch (ISO 2080:2008)This European Standard was approved by CEN on 7 May 2009.CEN members ar
7、e bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to th
8、e CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same st
9、atus as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania,
10、Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide
11、for CEN national Members.Ref. No. EN ISO 2080:2009: EForeword The text of ISO 2080:2008 has been prepared by Technical Committee ISO/TC 107 “Metallic and other inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 2080:2009 by Technical Com
12、mittee CEN/TC 262 “Metallic and other inorganic coatings” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2009, and conflicting national standards
13、 shall be withdrawn at the latest by November 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 12
14、508:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irelan
15、d, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 2080:2008 has been approved by CEN as a EN ISO 2080:2009 without any modification. BS EN ISO 2080:
16、2009ii EN ISO 2080:2009 (E) ISO 2080:2008(E/F) iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each
17、 member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internationa
18、l Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards
19、 adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of
20、 patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 2080 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings. This third edition cancels and replaces the second edition (ISO 2080:1981) and also ISO 2079:1981, which ha
21、ve been technically revised. ISO 2009 All rights reserved/Tous droits rservs BS EN ISO 2080:2009iv Avant-propos LISO (Organisation internationale de normalisation) est une fdration mondiale dorganismes nationaux de normalisation (comits membres de lISO). Llaboration des Normes internationales est en
22、 gnral confie aux comits techniques de lISO. Chaque comit membre intress par une tude a le droit de faire partie du comit technique cr cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec lISO participent galement aux travaux. LISO collabore troitem
23、ent avec la Commission lectrotechnique internationale (CEI) en ce qui concerne la normalisation lectrotechnique. Les Normes internationales sont rdiges conformment aux rgles donnes dans les Directives ISO/CEI, Partie 2. La tche principale des comits techniques est dlaborer les Normes internationales
24、. Les projets de Normes internationales adopts par les comits techniques sont soumis aux comits membres pour vote. Leur publication comme Normes internationales requiert lapprobation de 75 % au moins des comits membres votants. Lattention est appele sur le fait que certains des lments du prsent docu
25、ment peuvent faire lobjet de droits de proprit intellectuelle ou de droits analogues. LISO ne saurait tre tenue pour responsable de ne pas avoir identifi de tels droits de proprit et averti de leur existence. LISO 2080 a t labore par le comit technique ISO/TC 107, Revtements mtalliques et autres rev
26、tements inorganiques. Cette troisime dition annule et remplace la deuxime dition (ISO 2080:1981) ainsi que lISO 2079:1981, qui ont fait lobjet dune rvision technique. ISO 2009 All rights reserved/Tous droits rservsBS EN ISO 2080:2009ISO 2080:2009 (E) ISO 2080:2008(E/F) vIntroduction The terms and de
27、finitions in this International Standard (a combined revision of ISO 2079 and ISO 2080) apply to electroplating and other related surface-finishing processes. The terms and definitions are not necessarily arranged in English alphabetical order. Related terms, giving different alternatives for a give
28、n process, have been grouped under a leading term, as, for example, in the case of “chemical plating”, “electrodeposition”, “blasting”, “cleaning” or “colour anodising”. Basic terms and definitions relating to corrosion and electrochemical techniques used in corrosion science are given in ISO 8044 a
29、nd are not included. Basic terms used in chemistry, electrochemistry or physics are also not included in this International Standard. The definitions for such terms can be found in handbooks or dictionaries of chemistry or physics. ISO 2009 All rights reserved/Tous droits rservs BS EN ISO 2080:2009v
30、i Introduction Les termes et dfinitions donns dans la prsente Norme internationale (rvision groupe de lISO 2079 et de lISO 2080) sappliquent llectrodposition et autres procds de finition de surface connexes. Les termes et dfinitions ne sont pas ncessairement classs dans lordre alphabtique anglais. L
31、es termes connexes indiquant des alternatives pour un procd donn ont t regroups sous un terme cl, comme par exemple dans le cas de dpt chimique, de dpt lectrolytique, de projection de particules, de nettoyage ou de anodisation colore. Les termes fondamentaux et les dfinitions relatifs la corrosion e
32、t aux techniques lectrochimiques utiliss dans la science de la corrosion sont donns dans lISO 8044. Les termes de base utiliss en chimie, en lectrochimie ou en physique ne sont pas inclus dans la prsente Norme internationale. Les dfinitions de ces termes peuvent tre trouves dans des manuels ou dans
33、des dictionnaires de chimie ou de physique. ISO 2009 All rights reserved/Tous droits rservsBS EN ISO 2080:2009ISO 2080:2009 (E) INTERNATIONAL STANDARD NORME INTERNATIONALE ISO 2080:2008(E/F)1Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary Rev
34、tements mtalliques et autres revtements inorganiques Traitement de surface, revtements mtalliques et autres revtements inorganiques Vocabulaire 1 Scope 1 Domaine dapplication This International Standard describes general types of surface-finishing processes and provides a vocabulary that defines ter
35、ms related to these processes. Emphasis is placed on practical usage in surface-finishing technology in the metal-finishing field. The vocabulary does not include definitions and terms for porcelain and vitreous enamel, thermally sprayed coatings and hot-dip galvanizing for which specialized vocabul
36、aries and glossaries exist or are in preparation. For the most part, basic terms that have the same meaning in surface finishing as in other fields of technology, and that are defined in handbooks and dictionaries of chemistry and physics, are not included. La prsente Norme Internationale dcrit des
37、types gnraux de procds de traitement de surface et fournit un vocabulaire qui dfinit les termes se rapportant ces procds. Laccent est mis sur lutilisation pratique, en technologie de finition de surface, dans le domaine de la finition des mtaux. Ce vocabulaire ninclut pas les dfinitions et les terme
38、s relatifs la porcelaine, lmail vitrifi, aux revtements projets thermiquement et la galvanisation par immersion chaud pour lesquels des vocabulaires et glossaires spcialiss existent dj ou sont en cours dlaboration. Le plus souvent, les termes fondamentaux possdant la mme signification dans le domain
39、e du traitement de surface que dans dautres domaines de technologie, et qui sont dfinis dans des manuels et des dictionnaires de chimie et de physique, sont exclus de la prsente Norme internationale. 2 General types of surface-finishing processes and treatments 2 Types gnraux de traitements et de pr
40、ocds de finition de surface 2.1 chemical plating deposition of a metallic coating by chemical, non-electrolytic methods 2.1 dpt chimique dposition chimique dpt dun revtement mtallique par des mthodes chimiques, non lectrolytiques BS EN ISO 2080:2009 ISO 2009 All rights reserved/Tous droits rservs 2
41、2.1.1 autocatalytic plating electroless plating (deprecated) deposition of a metallic coating by a controlled chemical reduction that is catalysed by the metal or alloy being deposited 2.1.1 dpt autocatalytique dpt sans courant ( viter) dposition dun revtement mtallique par une rduction chimique con
42、trle qui est catalyse par le mtal ou lalliage dpos 2.1.2 contact plating deposition of a metal by use of an internal source of current by immersing the work (3.202) in contact with another metal in a solution containing a compound of the metal to be deposited 2.1.2 dpt par contact dposition dun mtal
43、 par lintermdiaire dune source interne de courant, obtenue par immersion de la pice traiter (3.202) en contact avec un autre mtal dans une solution contenant un compos du mtal dposer 2.1.3 immersion coating immersion plate US metallic coating produced by a displacement reaction in which one metal di
44、splaces another from a solution, for example, Fe + Cu2+ Cu + Fe2+2.1.3 dpt au tremp revtement mtallique obtenu par une raction dans laquelle un mtal dplace un autre mtal de la solution, par exemple, Fe + Cu2+ Cu + Fe2+2.2 chemical vapour deposition GB chemical vapor deposition US CVD deposition of a
45、 coating by a chemical reaction, induced by heat or gaseous reduction of a vapour condensing on a substrate (3.185) 2.2 dposition en phase vapeur par procd chimique dposition dun revtement par raction chimique, obtenue par rduction thermique ou gazeuse dune vapeur condense sur un substrat (3.185) 2.
46、3 conversion treatment chemical or electrochemical process producing a superficial layer containing a compound of the substrate metal (often referred to as conversion coating) and an anion of an environment EXAMPLE Chromate coatings on aluminium; zinc (often erroneously referred to as passivate coat
47、ing); oxide and phosphate coatings on steel. NOTE Anodizing (3.8), although fulfilling the above definition, is not normally referred to as a conversion coating process or chromating. 2.3 traitement de conversion procd chimique ou lectrochimique formant une couche superficielle comprenant un compos
48、du substrat mtallique (souvent appel couche de conversion) et un anion du milieu ambiant EXEMPLE Couches de chromate sur aluminium; zinc (souvent appeles tort couche ltat passif); couches doxyde et phosphate sur acier. NOTE Lanodisation (3.8), bien que correspondant la dfinition ci-dessus, nest normalement pas considre comme un traitement de conversion ou une chromatation. BS EN ISO 2080:2009ISO 2080:2008(E/F) ISO 2009 All rights reserved/Tous droits rservs32.4 diffusion treatment process of producing a surface layer (diffusion layer) by diffusion of an
