EN ISO 2342-2003 en Slotted headless screws with shank《有柄开槽无头螺钉 ISO 2342-2003》.pdf

上传人:feelhesitate105 文档编号:722133 上传时间:2019-01-04 格式:PDF 页数:14 大小:428.20KB
下载 相关 举报
EN ISO 2342-2003 en Slotted headless screws with shank《有柄开槽无头螺钉 ISO 2342-2003》.pdf_第1页
第1页 / 共14页
EN ISO 2342-2003 en Slotted headless screws with shank《有柄开槽无头螺钉 ISO 2342-2003》.pdf_第2页
第2页 / 共14页
EN ISO 2342-2003 en Slotted headless screws with shank《有柄开槽无头螺钉 ISO 2342-2003》.pdf_第3页
第3页 / 共14页
EN ISO 2342-2003 en Slotted headless screws with shank《有柄开槽无头螺钉 ISO 2342-2003》.pdf_第4页
第4页 / 共14页
EN ISO 2342-2003 en Slotted headless screws with shank《有柄开槽无头螺钉 ISO 2342-2003》.pdf_第5页
第5页 / 共14页
点击查看更多>>
资源描述

1、BRITISH STANDARD BS EN ISO 2342:2003 Slotted headless screws with shank The European Standard EN ISO 2342:2003 has the status of a British Standard ICS 21.060.10 BS EN ISO 2342:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 8 January 20

2、04 BSI 8 January 2004 ISBN 0 580 43190 8 National foreword This British Standard is the official English language version of EN ISO 2342:2003. It is identical with ISO 2342:2003. The UK participation in its preparation was entrusted by Technical Committee FME/9, Nuts, bolts and accessories, to Subco

3、mmittee FME/9/1, Mechanical properties of fasteners, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in thi

4、s document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a con

5、tract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, an

6、d keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii and iii, a blank page,

7、 pages 1 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO2342 December2003 ICS21.060.10 Englishv

8、ersion Slottedheadlessscrewswithshank(ISO2342:2003) Vissansttefendues,ft(ISO2342:2003) GewindestiftemitSchlitzmitSchaft(ISO2342:2003) ThisEuropeanStandardwasapprovedbyCENon4November2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an

9、Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadeb

10、ytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Neth

11、erlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationa

12、lMembers. Ref.No.ENISO2342:2003EINESO32:2402(30E) 2 Foreword Thisdocument(ENISO2342:2003)hasbeenpreparedbyTechnicalCommitteeISO/TC2 “Fasteners“incollaborationwithTechnicalCommitteeCEN/TC185“Threadedandnon threadedmechanicalfastenersandaccessories“,thesecretariatofwhichisheldbyDIN. ThisEuropeanStanda

13、rdshallbegiventhestatusofanationalstandard,eitherbypublicationof anidenticaltextorbyendorsement,atthelatestbyJune2004,andconflictingnational standardsshallbewithdrawnatthelatestbyJune2004. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowingcountriesareboundt

14、oimplementthisEuropeanStandard:Austria,Belgium,Czech Republic,Denmark,Finland,France,Germany,Greece,Hungary,Iceland,Ireland,Italy, Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,Switzerlandand theUnitedKingdom. NOTEFROMCMC TheforewordissusceptibletobeamendedonreceptionoftheGerman

15、 languageversion.Theconfirmedoramendedforeword,andwhenappropriate,thenormative annexZAforthereferencestointernationalpublicationswiththeirrelevantEuropean publicationswillbecirculatedwiththeGermanversion. Endorsementnotice ThetextofISO2342:2003hasbeenapprovedbyCENasENISO2342:2003withoutany modificat

16、ions. ENISO2342:2003INTERNATIONAL STANDARD ISO 2342 Second edition 2003-12-01 Reference number ISO 2342:2003(E) ISO 2003 Slotted headless screws with shank Vis sans tte fendues, ftENISO2342:2003ISO :2432(3002)E ii ISO 3002 All rithgs reresvde id FDPscalimer ThFDP si fam eliy ctnome niat deddebyepfa.

17、sec In cacnadrociw eth sebodA sneciliycilop gn, thf siam elirp eb ytnide or viewb detu llahs ton tide ebed lnuet sst ehyfepcaa hcihw serdebme et desnecil era dedo tsni dnat no dellahpmoc eturep reformign ttide ehign. In odt gnidaolnwsih liferap ,tcca seitpe trehnie snopser ehtitiliby fo nto fnirA gn

18、igniycilop gnisnecil sebod. Teh SItneC Olar Seerctraiat catpecs ibail ontily t nih.aera si Aebod t a sirramedak fo AsyS ebodtmeI snocrropta.de teDlias fo tfos ehtwcudorp erats t desutaerc ot esih FDP fb nac elif et ni dnuoG ehreneI lafnr oleative tt of eh;eli tP ehDF-rctaenoi temaraptpo erew sremizi

19、f deorp rinti.gn Evrey t neeb sah eracakt neo rusnee ttah tf ehtius si elibaf elosu re by ISO memdob rebsei. In eht kilnuyle evtne ttah a borplme rtaleit gno it si f,dnuo esaelp ifnrom thtneC erla ceSrteraita ta teh sserdda vigoleb new. IOS 3002 Alr lithgs reresv.de sselnU toesiwreh sficep,dei rap o

20、nt fo thbup silitaciam nocudorper eb yde or tuilidez na nif yorm ro by nam ysnae, tcelerm ro cinocinahcela, tohp gnidulcnicopom dna gniyicrfomli, tiwuoht repsimsi noin wrtif gnirtie mohI reSO ta the asserdd ebwol or ISOmem sreb obyd t nitnuoc ehry fo teh euqertsre. SIc Oopyrigho tfifce saCsop etela

21、65 -HCG 1121eneva 02 T.le 22 14 + 10 947 11 Fxa + 22 14 0 94774 9 Eam-il ocpyrithgios.ogr Web wwwi.soo.rg ENISO2342:2003ISO 2342:2003(E) ISO 3002 r llAithgs reservde iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO memb

22、er bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, government

23、al and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Direct

24、ives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodie

25、s casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 2342 was prepared by Technical Committee ISO/TC 2, Fasteners. This second editi

26、on cancels and replaces the first edition (ISO 2342:1972), which has been technically revised. ENISO2342:2003. iv ENISO2342:2003ANRETNIITOTS LANDNADRA OSI 4323002:2)E( ISO 3002 r llAithgs reservde 1 Slotted headless screws with shank 1S c o p e This International Standard specifies the characteristi

27、cs of slotted headless screws with shank with threads from M1 up to and including M10. If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 898-5, ISO 965-2, ISO 3506

28、-3, ISO 8839 and ISO 4759-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applie

29、s. ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and designations of dimensions ISO 261, ISO general-purpose metric screw threads General plan ISO 898-5, Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners not under ten

30、sile stresses ISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads Medium quality ISO 3269, Fasteners Acceptance inspection ISO 3506-3, Mechanical properties of corrosion-resistant stainless-steel fasteners Par

31、t 3: Set screws and similar fasteners not under tensile stress ISO 4042, Fasteners Electroplated coatings ISO 4753, Fasteners Ends of parts with external ISO metric thread ISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C ISO 6157-1, Fasteners Surfa

32、ce discontinuities Part 1: Bolts, screws and studs for general requirements ISO 8839, Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals ISO 10683, Fasteners Non-electrolytically applied zinc flake coatings ENISO2342:2003ISO 2342:2003(E) 2 ISO 3002 All rithgs

33、 reresvde 3 Dimensions See Figure 1 and Table 1. Symbols and designations of dimensions are specified in ISO 225. a Flat point according to ISO 4753. b Incomplete thread . c The angle applies only to the portion of the point situated below the root diameter of the thread. Figure 1 u 2P 45 ENISO2342:

34、2003OSI 4323002:2)E( ISO 3002 r llAithgs reservde 3 Table 1 Dimensions Dimensions in millimetres Thread ( ) M1 M1,2 M1,6 M2 M2,5 M3 (M3,5) c M4 M5 M6 M8 M10 a 0,25 0,25 0,35 0,4 0,45 0,5 0,6 0,7 0,8 1 1,25 1,5 1,2 1,4 1,9 2,4 3 3,6 4,2 4,8 6 7,2 9,6 12 min. 0,86 1,06 1,46 1,86 2,36 2,86 3,32 3,82 4,

35、82 5,82 7,78 9,78 max. 1,00 1,20 1,60 2,00 2,50 3,00 3,50 4,00 5,00 6,00 8,00 10,00 nom. 0,2 0,25 0,3 0,3 0,4 0,5 0,5 0,6 0,8 1 1,2 1,6 min. 0,26 0,31 0,36 0,36 0,46 0,56 0,56 0,66 0,86 1,06 1,26 1,66 max. 0,40 0,45 0,50 0,50 0,60 0,70 0,70 0,80 1,00 1,20 1,51 1,91 min. 0,63 0,63 0,88 1,0 1,10 1,25

36、1,50 1,75 2,00 2,5 3,1 3,75 max. 0,78 0,79 1,06 1,2 1,33 1,50 1,78 2,05 2,35 2,9 3,6 4,25 max. 0,6 0,6 0,9 1 1,1 1,25 1,5 1,75 2 2,5 3,2 3,8 b, c nom. min. max. 2,5 2,3 2,7 3 2,8 3,2 4 3,7 4,3 5 4,7 5,3 6 5,7 6,3 8 7,7 8,3 10 9,7 10,3 12 11,6 12,4 (14) 13,6 14,4 16 15,6 16,4 20 19,6 20,4 25 24,6 25,

37、4 30 29,6 30,4 35 34,5 35,5 ais the pitch of the thread. b The range of commercial length is between the bold stepped lines. c Sizes in brackets should be avoided if possible. d P b +2P 0 d s n t x l P ENISO2342:2003ISO :2432(3002)E 4 ISO 3002 All rithgs reresvde 4 Specifications and reference Inter

38、national Standards See Table 2. 5 Designation EXAMPLE A slotted headless screw with shank, thread M4, length and with property class 14H, is designated as follows: Headless screw ISO 2342 - M4 10 - 14H Table 2 Specifications and reference International Standards Material Steel Stainless steel Non-fe

39、rrous metal General requirements International Standard ISO 8992 Thread To l e r a n c e International Standards ISO 261, ISO 965-2 Mechanical properties Property class 14H, 22H, 45H A1-12H As agreed International Standards ISO 898-5 ISO 3506-3 ISO 8839 Tolerances Product grade A International Stand

40、ard ISO 4759-1 Finish As processed Plain Plain Requirements for electroplating are covered in ISO 4042. Requirements for electroplating are covered in ISO 4042. Requirements for non-electrolytically applied zinc flake coatings are covered in ISO 10683. Surface discontinuities Limits for surface disc

41、ontinuities are covered in ISO 6157-1. Acceptability The acceptance procedure is covered in ISO 3269. 6g l= 10 mm ENISO2342:2003. 5 BS EN ISO 2342:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British St

42、andards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the co

43、nstant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover.

44、Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be add

45、ressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been publis

46、hed as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available wh

47、ich give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi-glo

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1