1、STD=BSI BS EN IS0 5080-ENGL 1799 Lb2ibbS 0779b53 Li13 = BRITISH STANDARD Sisal agricultural twines The European Standard EN IS0 50801999 has the status of a British Standard ICs 59.080.50 BS EN IS0 5080: 1999 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN IS0 6080:1999
2、been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 October 1999 Amd. No. O BSI 10-1999 ISBN O 580 35228 5 National foreword Date Comments This British Standard is the English
3、language version of EN IS0 50801999. It is identical with IS0 5080: 1994. It supersedes BS EN 25080: 1993 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCy77, Ropes, cordage and fishing nets, which has the responsibility to: - aid enquirem to unders
4、tand the text; - present to the responsible internationaVEuropean committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed - monitor related international and European developments and promulgate them in the UK. A list of organizations represented on
5、 this committee can be obtained on request to its secretary. Cross-references Attention is dram to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards wh
6、ich implement these international or European publications may be found in the BSI Standards Catalogue under the section entited “International Standards Correspondence index”, or by using the “Find” facility of the BSI Standards Electronic Caalogue. A British Standard does not purport to include al
7、l the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN IS0
8、title page, the EN IS0 foreword page, the IS0 title page, page ii, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. EUROPEAN STANDARD NORME EUROPEENNE EUROPISCHE NORM EN IS0 5080 July 1999 ICs 59.080.50 Supersedes EN 2508
9、0:1993 English version Sisal agricultural twines (IS0 5080:1994) Ficelles agricoles en sisal (IS0 5080:1994) Sisal-Emtegame (IS0 5080:1994) This European Standard was approved by CEN on 18 April 1999. CEN members are bound to comply with the CEWCENELEC Internal Regulations which stipulate the condit
10、ions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three o
11、fficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austri
12、a, Belgium, Czech Republic, Denmark, Finland, France, Germany. Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMlTEE FOR STANDARDIZATION COMITI? EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Central Sec
13、retariat: rue de Stassart, 36 51050 Brussels O 1999 CEN Ail rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN IS0 5W.1999 E STD.BSI BS EN IS0 5080-ENGL 1779 = 1b24bb 077b5b 122 I EN IS0 5080:1999 Foreword The text of the International Standa
14、rd from Technical Committee ISO/TC 38 Textiles“ of the International Organization for Standardization (EO) has been taken over as an European Standard by Technical Committee CEN/TC 248 “Textiles and textile products“, the secretariat of which is held by BSI. This European Standard replaces EN 25080:
15、1994. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2000, and conflicting national standards shall be withdrawn at the latest by January 2000. According to the CENKENELEC Internal Regula
16、tions, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the Un
17、ited Kingdom. Endorsement notice The text of the International Standard IS0 5080:1994 has been approved by CEN as a European Standard without any modification. _ STD-BSI BS EN IS0 5080-ENGL 1999 m Lb2L(bb9 0799b57 Ob9 m EN IS0 5080:1999 I NT ER NAT I O NA L STA N DA R D IS0 5080 Second edition 1994-
18、1 1-1 5 Sisal agricultural twines Ficelles agricoles en sisal Reference number IS0 5080:1994(E) STD.BSI BS EN IS0 5080-ENGL 1799 E 1b24bb9 0797b58 TT5 m EN IS0 5080:1999 Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 memb
19、er bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, government
20、al and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the memb
21、er bodies for voting. Publication as an International Standard requires approval by at least 75 Y of the member bodies casting a vote. International Standard IS0 5080 was prepared by Technical Committee ISOflC 38, Textiles. This second edition cancels and replaces the first edition (IS0 5080:1977),
22、clause 10 of which has been technically revised. Descriptors: textiles, cordages, sisal. twine. specifications. tests, markmg. commercial presentation, agriculture. II STD-BSI ES EN IS0 5080-ENGL 1777 E 1b2Libb7 0777b57 731 = EN IS0 5080:1999 Sisal agricultural twines 1 Scope This International Stan
23、dard establishes the principal properties of sisal agricultural twines, prescribes methods of test permitting their verification and specifies the form of commercial presentation for the twines. 2 Normative references The following standards contain provisions which, through reference in this text,
24、constitute provisions of this International Standard. At the time of publica- tion, the editions indicated were valid. All standards 3 subject to revision, and parties to agreements sed on this International Standard are encouraged to investigate the possibility of applying the most re- cent edition
25、s of the standards indicated below. Members of IEC and IS0 maintain registers of cur- rently valid International Standards. IS0 2:1973, Textiles - Designation of the direction of twist in yarns and related products. IS0 1968: 1973, Ropes and cordage - Vocabulary. IS0 3534-1 : 1993, Statistics - Voca
26、bulary and sym- bols - Part I: Probability and general statistical terms. 3.1 agricultural twine: Monofilament twine in- tended for use in agriculture. notably for binding the bundles on automatic pick-up balers or the sheaves on reaping and binding machines or on similar ma- chines. 3.2 batch: Defi
27、nite quantity of twine produced under conditions which are presumed uniform. 3.3 laboratory sample: Total selection of samples from a batch intended for the laboratory for testing. 3.4 specimen: Quantity of twine on which a test in accordance with this International Standard is carried out. 4 Design
28、ation A twine conforming to this International Standard is designated by the term “sisal agricultural twine“, fol- lowed by its code number. EXAMPLE A sisal agricultural twine having a length of 300 rn per kilogram of mass is designated as follows: Sisal agricultural twine No. 300 5 Manufacture 3 De
29、finitions the purposes of this International Standard, the mitions given in IS0 1968 and IS0 3534-1 and the owing definitions apply. The fibre used for the manufacture of the twine shall consist of new genuine fibre of long staple; it shall be unadulterated, free from defects and true to form as sis
30、al (Agave sisalanal. 1 EN IS0 6080:1999 No. 300 Relevant property I Unia I No. 150 No. 200 Each spool of twine shall be capable of working with continuity throughout its length. The twine shall have a Z twist, as defined in IS0 2. For the purpose of dressing the fibre, a lubricant shall be added. TO
31、S method given in 6 Technical properties The technical properties of the twines and the meth- ods to be used for their measurement are indicated in table 1, which also indicates the application of the twines. Runnage Equivalent linear density Minimum breaking force testing, to which the following sa
32、mpling formula ap- plies: S = 0,25 fi mlkg 150 f 12 200 _+ 16 300 f 24 8.1 tex 6667 194“ 5 O00 :;i 3 333 daNz) 98 69 40 8.2 where Minimum extractable lubricant S is the number of spools sampled (when S as calculated is not a whole number, round off the value obtained to give a whole number); % (dm)
33、13 13 13 8.3 N is the number of spools in a batch of 100 t or less. When the indicated values are neither maxima nor minima, the tolerances indicated in table 1 apply. 7.2 Selection of sample 7 Sampling 7.1 Number of spools in a laboratory sample Each 100 t or part thereof in a consignment of twine
34、of the same code number shall represent a batch for For each batch, the laboratory sample is made up as follows. Select at random the required number of spools, each taken from a different bale of the batch. Table 1 - Technical properties of sisal agricultural twines Designation of the twinel) I I V
35、alues for the properties I Application Lowdensity baling and /-I baling I binding l- High- and mediumdensity 1) Although other sizes of twine are not recommended. any country which, for internal reasons, would have to include other twines in its national standard must record in its standard that the
36、se twines are not included in the International Standard. In order to make sure that these twines have the same quality level as that of the twines in this Intemational Standard, their specifications shall be calculated, as far as the minimum breaking force requirement is concerned, by means of the
37、following equation: 17400 ,* R=- II where R n 2) The SI unit of force is the newton. A force of 1 decanewton (daN) = 1.02 kgf. is the breaking force, in decanewtons; is the runnage of twine, in metres per kilogram. 2 STD-BSI BS EN IS0 !OACI-ENGL 1797 lb2Ybb7 0777bbli 57T EN IS0 6080:1999 8 Test meth
38、ods 8.1 Determination of linear density and runnage 8.1.1 Principle Weighing, under specified conditions, specimens of specified length, then calculation of the linear density and the mnnage (or length in metres per kilogram). 8.1.2 Apparatus 8.1.2.1 Balance, accurate to 0.5 g. 1.1.2.2 Wrapreel, of
39、known perimeter 8.1.5 Expression of results 8.1.5.1 Calculation of linear density For each specimen, calculate the linear density T, in tex, using the equation 1 O00 ml 30 T= where ml is the mass, in grams, of the specimen. 8.1 5.2 Calculation of runnage Calculate the runnage L, in metres per kilogr
40、am of twine, using the following formula: L=- 1 o6 T where T is the linear density, in tex. 8.1.3 Spedmens 8.1.5.3 Check test 8.1.3.1 Selection Select 30 m of twine from each spool as follows. Directly from the centre of each spool, in an anti- clockwise direction, draw the first 10 m of twine and d
41、iscard them. Then draw 30 m of twine and wind them as adjacent turns (without overlapping) on the wrap-reel (8.1.2.21, exercising just sufficient tension on the twine to maintain straightness. Remove the twine from the wrapreel. !ach specimen of 30 m thus obtained constitutes a L ,est piece. 8.1.3.2
42、 Conditioning The tests shall be carried out in an ambient atmos- phere provided that the twine has been kept in con- ditions which do not damage its original properties. In case of dispute, leave the specimens for 48 h in a standard atmosphere for testing temperature 20 OC f 2 “C, relative humidity
43、 (65 2) %. before continuing with the tests. 8.1.4 Procedure Tetermine the mass m, in grams, of each specimen weighing on the balance (8.1.2.1) to the nearest .5 9. If a specimen is outside the tolerance given in table 1, a check test shall be carried out on another spool. If the result of the check
44、 test is found to be within the limits of the permitted tolerances (see table 11, the result of the check test is adopted for the value of the linear density. 8.2 Determination of breaking force 8.2.1 Principle Measurement of the force (expressed in decanewtons) necessary to break, under known con-
45、ditions, a specimen of specified length. 8.2.2 Apparatus 8.2.2.1 Tensile testing machine, having a constant rate of traverse, with a mobile grip. This testing ma- chine should comprise: 8.2.2.1.1 Two devices for gripping the ends of the test piece. 8.2.2.1.2 Device for maintaining the rate of tra- v
46、erse constant at 500 mm/min f 50 mmlmin. 3 8.2.2.1.3 Device for indicating or recording con- tinuously the force applied. 8.3 Determination of extractable lubricant 8.3.1 Principle 8.2.3 Specimens After determining the runnage, draw directly from the centre of each spool in an anti-clockwise directi
47、on, and without cutting the twine, 10 specimens spaced 5 m from each other and of sufficient length so that once they are mounted in the testing machine, the free length of the specimen between the gripping devices is as close as possible to 500 mm. Each specimen shall be identified by reference to
48、the spool from which it has been drawn. 8.2.4 Procedure 8.2.4.1 Check that the speed of movement of the moving grips of the machine is constant and equal to 500 mm/min the total mass thus selected shall be enclosed in a plastic bag and rolled up for despatch to the test laboratory. 8.3.3.2 Condition
49、ing The tests shall be carried out in an ambient atmos- phere provided that the twine has been kept in con- ditions which do not damage its original properties. In cases of dispute, leave the specimens for 48 h in a standard atmosphere temperature 20 “C k 2 “C, relative humidity (65 k 2) %, before continuing with the tests. 8.3.4 Procedure Select a representative specimen, of mass at least 40 g, from the total mass obtained in 8.3.3.1. If this specimen cannot be extracted in one operation, divide it into two and extract the two parts separatel
