1、BRITISH STANDARD BS EN ISO 9902-2:2001 Textile machinery Noise test code Part 2: Spinning preparatory and spinning machinery ICS 17.140.20; 59.120.01 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW +A2:2014National foreword This British Standard is the UK implementation of EN
2、ISO 9902-2:2001+A2:2014. It is identical to ISO 9902-2:2001, incorporating amendments 1:2009 and 2:2014. It supersedes BS EN ISO 9902-2:2001+A1:2009, which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to ISO t
3、ext carry the number of the ISO amendment. For example, text altered by ISO amendment 1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery. A list of organizations represented on this committee can be obtained on request to its
4、secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN ISO 9902-2:2001+A2:2014 This British Standard was published u
5、nder the authority of the Standards Committee and comes into effect on 15 July 2001 Amendments/corrigenda issued since publication Date Comments 30 November 2009 Implementation of ISO amendment 1:2009 with CEN endorsement A1:2009 31 July 2014 Implementation of ISO amendment 2:2014 with CEN endorseme
6、nt A2:2014: Note added to Scope. Annex ZA updated ISBN 978 0 580 80831 9 The British Standards Institution 2014. Published by BSI Standards Limited 2014EUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN ISO 9902-2:2001+A2 ICS17.140.20;59.120.01 Englishversion TextilemachineryNoisetestcodePart2:Spinni
7、ng preparatoryandspinningmachinery(ISO99022:2001) MatrielpourlindustrietextileCodedessaiacoustique Partie2:Machinesdeprparationdefilatureetmachines defilature(ISO99022:2001) TextilmaschinenGeruschmessverfahrenTeil2: SpinnereivorbereitungsundSpinnmaschinen(ISO9902 2:2001) ThisEuropeanStandardwasappro
8、vedbyCENon15March2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEuropean Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcerningsuchnational standardsmaybeobtainedonapplicationtotheMana
9、gementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytranslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusastheofficial versions. CENmembersarethenationalstand
10、ardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG Management Centre: rue d
11、e Stassart, 36 B-1050 Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO99022:2001E June 2014INESO9920:20021 Foreword ThetextoftheInternationalStandardISO99022:2001hasbeenpreparedbyTechnicalCommitteeISO/TC 72“Textilemachineryandmachine
12、ryfordrycleaningandindustriallaundering“incollaborationwith TechnicalCommitteeCEN/TC214“Textilemachineryandmachineryfordrycleaningandindustriallaundry“, thesecretariatofwhichisheldbySNV. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentical textorbyendorsement
13、,atthelatestbySeptember2001,andconflictingnationalstandardsshallbe withdrawnatthelatestbySeptember2001. ThisEuropeanStandardhasbeenpreparedunderamandategiventoCENbytheEuropeanCommission andtheEuropeanFreeTradeAssociation,andsupportsessentialrequirementsofEUDirective(s). ForrelationshipwithEUDirectiv
14、e(s),seeinformativeAnnexZB,whichisanintegralpartofthisstandard. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,Italy,Lux
15、embourg,Netherlands,Norway,Portugal, Spain,Sweden,SwitzerlandandtheUnitedKingdom. Endorsement notice ThetextoftheInternationalStandardISO99022:2001wasapprovedbyCENasaEuropeanStandard withoutanymodification. NOTE:NormativereferencestoInternationalStandardsarelistedinannexZA(normative). Attentionisdra
16、wntothepossibilitythatsomeoftheelementsofthisInternationalStandardmaybethe subjectofpatentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights. ThisfirsteditionofISO99022,togetherwithISO99021,ISO99023,ISO99024,ISO99025, ISO99026andISO99027,cancelsandreplacesISO9902:1993,whichhas
17、beentechnicallyrevised. ISO9902consistsofthefollowingparts,underthegeneraltitle TextilemachineryNoisetestcode : Part1:Commonrequirements Part2:Spinningpreparatoryandspinningmachinery Part3:Nonwovenmachinery Part4:Yarnprocessing,cordageandropemanufacturingmachinery Part5:Weavingandknittingpreparatory
18、machinery Part6:Fabricmanufacturingmachinery Part7:Dyeingandfinishingmachinery AnnexZAofthispartofISO9902isforinformationonly. BS EN ISO 9902-2:2001+A2:2014 EN ISO 9902-2:2001+A2:2014 (E)Foreword to amendment A1 Thisdocument(ENISO99022:2001/A1:2009)hasbeenpreparedbyTechnicalCommitteeISO/TC72 “Textil
19、emachineryandmachineryfordrycleaningandindustriallaundering“incollaborationwithTechnical CommitteeCEN/TC214“Textilemachineryandaccessories“,thesecretariatofwhichisheldbySNV. ThisAmendmenttotheEuropeanStandardENISO99022:2001shallbegiventhestatusofanational standard,eitherbypublicationofanidenticaltex
20、torbyendorsement,atthelatestbySeptember2009,and conflictingnationalstandardsshallbewithdrawnatthelatestbyDecember2009. Attentionisdrawntothepossibilitythatsomeoftheelementsofthisdocumentmaybethesubjectofpatent rights.CENand/orCENELECshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights. Th
21、isdocumenthasbeenpreparedunderamandategiventoCENbytheEuropeanCommissionandthe EuropeanFreeTradeAssociation,andsupportsessentialrequirementsofECDirective(s). AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:A
22、ustria,Belgium,Bulgaria,Cyprus,Czech Republic,Denmark,Estonia,Finland,France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia, Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal,Romania,Slovakia,Slovenia,Spain, Sweden,SwitzerlandandtheUnitedKingdom. Endorsement notice ThetextofISO99022
23、:2001/Amd1:2009hasbeenapprovedbyCENasaENISO99022:2001/A1:2009 withoutanymodification.This document (EN ISO 9902-2:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories“ in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessori
24、es” the secretariat of which is held by SNV. This Amendment to the European Standard EN ISO 9902-2:2001 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and conflicting national standards shall be withdraw
25、n at the latest by December 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate give
26、n to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the nat
27、ional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li
28、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 9902-2:2001/Amd 2:2014 has been approved by CEN as EN ISO 9902-2:2001/A2:2014 without any modification. Forewo
29、rd to amendment A2 BS EN ISO 9902-2:2001+A2:2014 EN ISO 9902-2:2001+A2:2014 (E)Reference number ISO 9902-2:2001(E) INTERNATIONAL STANDARD ISO 9902-2 First edition 2001-03-15 Textile machinery Noise test code Part 2: Spinning preparatory and spinning machinery Matriel pour lindustrie textile Code des
30、sai acoustique Partie 2: Machines de prparation de filature et machines de filaturei ii BS EN ISO 9902-2:2001+A2:2014 EN ISO 9902-2:2001+A2:2014 (E) iii Contents Page Foreword.iv 1 Scope 1 2 Normative references 1 3 Terms and definitions .2 4 Defining the test object .2 5 Sound power level determina
31、tion 2 6 Emission sound pressure level determination.3 7 Installation and mounting conditions4 8 Operating conditions.4 9 Measurement uncertainties 4 10 Information to be recorded .4 11 Information to be reported4 12 Declaration and verification of noise emission values4 BS EN ISO 9902-2:2001+A2:201
32、4ISO 9902-2:2001+A2:2014 (E)iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body intere
33、sted in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
34、Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication
35、 as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 9902 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent
36、 rights. International Standard ISO 9902-2 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for drycleaning and industrial laundering, Subcommittee SC 8, Safety requirements for textile machinery. This first edition of ISO 9902-2, together with ISO 9902-1, ISO 9902-3, I
37、SO 9902-4, ISO 9902-5, ISO 9902-6 and ISO 9902-7, cancels and replaces ISO 9902:1993, which has been technically revised. ISO 9902 consists of the following parts, under the general title Textile machinery Noise test code: Part 1: Common requirements Part 2: Spinning preparatory and spinning machine
38、ry Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving and knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery BS EN ISO 9902-2:2001+A2:2014 ISO 9902-2:2001+A2:2014 (E)INTENRATIONAL TSAN
39、DADR 1 Textile machinery Noise test code Part 2: Spinning preparatory and spinning machinery 1 Scope This part of ISO 9902, taken together with ISO 99021, specifies the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by spinnin
40、g preparatory and spinning machinery. It is applicable to engineering (grade 2) and survey (grade 3) methods, in accordance with the International Standards to which it makes normative reference, and to machines of different types used as defined in ISO 2187 for opening, cleaning and blending, wool
41、scouring, baling, carding, tow cutting and stretch breaking, spinning preparation subsequent to carding, and spinning. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 9902. For dated referenc
42、es, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 9902 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references,
43、the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. terms. ISO 3746, Acoustics Determination of sound power levels of noise sources using sound pressure Survey method using an enveloping measurement s
44、urface over a reflecting plane. method in an essentially free field over a reflecting plane. ISO 2187, Spinning preparatory machinery, spinning and doubling (twisting) machinery List of equivalent ISO 3744, AcousiticsDeterminationofsoundpowerlevelsofnoisesourcesusingsoundpressureEngineering! “ NOTE
45、Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery. BS EN ISO 9902-2:2001+A2:2014ISO 9902-2:2001+A2:2014 (E)2 ISO 3747, Acoustics Determination of sound power levels of noise sources using sound pressure Comparison method in si
46、tu. ISO 9614-1, Acoustics D etermination of sound power levels of noise sources using sound intensity Part1: Measurement at discrete points. ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part2: Measurement by scanning. ISO 11201, Acoustics Noise emitted by machinery and equipment Measurement of emission soundpressure levels at a work station and at other specified positions Engineering method in an essentially free fieldovera reflecting plane. ISO 11202, Acoustics Noise emitted by machinery and equipment
