1、BRITISH STANDARD BS EN ISO 9902-5:2001 Textile machinery Part 5: Weaving and knitting preparatory machinery NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW +A2:2014 Noise test code ICS 17.140.20; 59.120.01National foreword This British Standard is the UK implementation of EN ISO 9902-5:
2、2001+A2:2014. It is identical to ISO 9902-5:2001, incorporating amendment 1:2009 and amendment 2:2014. It supersedes BS EN ISO 9902-5:2001+A1:2009, which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to ISO tex
3、t carry the number of the ISO amendment. For example, text altered by ISO amendment 1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery. A list of organizations represented on this committee can be obtained on request to its se
4、cretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN ISO 9902-5:2001+A2:2014 This British Standard, having been prep
5、ared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 July 2001 Amendments/corrigenda issued since publication Date Comments 30 November 2009 Implementation of ISO amendment 1:2009 with C
6、EN endorsement A1:2009 30 September 2014 Implementation of ISO amendment 2:2014 with CEN endorsement A2:2014: Note added to Clause 1. Annex ZA inserted ISBN 978 0 580 80779 4 The British Standards Institution 2014. Published by BSI Standards Limited 2014EUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM
7、 ENISO99025 :2001+A ICS17.140.20;59.120.01 Englishversion TextilemachineryNoisetestcodePart5:Weavingand knittingpreparatorymachinery(ISO99025:2001) MatrielpourlindustrietextileCodedessaiacoustique Partie5:Machinesdeprparationautissageetau tricotage(ISO99025:2001) TextilmaschinenGeruschmessverfahrenT
8、eil5: VorbereitungsmaschinenfrdieWebereiund Kettenwirkerei(ISO99025:2001) ThisEuropeanStandardwasapprovedbyCENon15March2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEuropean Standardthestatusofanationalstandardwithoutanyalteration.Uptoda
9、telistsandbibliographicalreferencesconcerningsuchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytranslation undertheresponsibilityofaCENmemberintoitsownlanguag
10、eandnotifiedtotheManagementCentrehasthesamestatusastheofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMIT
11、TEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO99025:2001E 2 June 2014gaPe2 INESO9920:50021 Foreword ThetextoftheInt
12、ernationalStandardISO99025:2001hasbeenpreparedbyTechnicalCommitteeISO/TC 72“Textilemachineryandmachineryfordrycleaningandindustriallaundering“incollaborationwith TechnicalCommitteeCEN/TC214“Textilemachineryandmachineryfordrycleaningandindustriallaundry“, thesecretariatofwhichisheldbySNV. ThisEuropea
13、nStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentical textorbyendorsement,atthelatestbySeptember2001,andconflictingnationalstandardsshallbe withdrawnatthelatestbySeptember2001. ThisEuropeanStandardhasbeenpreparedunderamandategiventoCENbytheEuropeanCommission andtheEurope
14、anFreeTradeAssociation,andsupportsessentialrequirementsofEUDirective(s). ForrelationshipwithEUDirective(s),seeinformativeAnnexZB,whichisanintegralpartofthisstandard. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanS
15、tandard:Austria,Belgium,CzechRepublic,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal, Spain,Sweden,SwitzerlandandtheUnitedKingdom. Endorsementnotice ThetextoftheInternationalStandardISO99025:2001wasapprovedbyCENasaEuropeanStandard withoutanymodifi
16、cation. NOTE:NormativereferencestoInternationalStandardsarelistedinannexZA(normative). AttentionisdrawntothepossibilitythatsomeoftheelementsofthisInternationalStandardmaybethe subjectofpatentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights. ThisfirsteditionofISO99025,togethe
17、rwithISO99021,ISO99022,ISO99023,ISO99024, ISO99026andISO99027,cancelsandreplacesISO9902:1993,whichhasbeentechnicallyrevised. ISO9902consistsofthefollowingparts,underthegeneraltitle TextilemachineryNoisetestcode : Part1:Commonrequirements Part2:Spinningpreparatoryandspinningmachinery Part3:Nonwovenma
18、chinery Part4:Yarnprocessing,cordageandropemanufacturingmachinery Part5:Weavingandknittingpreparatorymachinery Part6:Fabricmanufacturingmachinery Part7:Dyeingandfinishingmachinery AnnexZAofthispartofISO9902isforinformationonly. BS EN ISO 9902-5:2001+A2:2014 EN ISO 9902-5:2001+A2:2014 (E)Foreword to
19、amendment A1 This document (EN ISO 9902-5:2001/A1:2009) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering“ in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories“, the secretariat of which i
20、s held by SNV. This Amendment to the European Standard EN ISO 9902-5:2001 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by December 2
21、009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Comm
22、ission and the European Free Trade Association, and supports essential requirements of EC Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus
23、, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 9902
24、-5:2001/Amd 1:2009 has been approved by CEN as a EN ISO 9902-5:2001/A1:2009 without any modification. This document (EN ISO 9902-5:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and accessories“ in collaboration with Technical Committee CEN/TC 214 “Textile machin
25、ery and accessories” the secretariat of which is held by SNV. This Amendment to the European Standard EN ISO 9902-5:2001 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and conflicting national standards
26、shall be withdrawn at the latest by December 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared und
27、er a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Reg
28、ulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,
29、Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 9902-5:2001/Amd 2:2014 has been approved by CEN as EN ISO 9902-5:2001/A2:2014 without any mod
30、ification. Foreword to amendment A2 BS EN ISO 9902-5:2001+A2:2014 EN ISO 9902-5:2001+A2:2014 (E)Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the Eu
31、ropean Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standar
32、d in at least one Member State, compliance with the normative clauses of this standard and of Part 1 of the series confers, within the limits of the scope of this standard, a presumption of conformity with Essential Requirement 1.7.4.2 (u) of that directive and associated EFTA regulations. WARNING:
33、Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 9902-5:2001+A2:2014 EN ISO 9902-5:2001+A2:2014 (E)Reference number ISO 99025:2001(E) INTERNATIONAL STANDARD ISO 99025 First edition 20010315 Textile machinery Noise tes
34、t code Part 5: Weaving and knitting preparatory machinery Matriel pour lindustrie textile Code dessai acoustique Partie 5: Machines de prparation au tissage et au tricotage BS EN ISO 9902-5:2001+A2:2014 ISO 9902-5:2001+A2:2014 (E)ISO 20995:(1002)E ii BS EN ISO 9902-5:2001+A2:2014 ISO 9902-5:2001+A2:
35、2014 (E)ISO 20995:(1002)E iii Contents Page Foreword.iv 1 Scope 1 2 Normative references 1 3 Terms and definitions .2 4 Defining the test object .2 5 Sound power level determination 2 6 Emission sound pressure level determination.2 7 Installation and mounting conditions4 8 Operating conditions.4 9 M
36、easurement uncertainties 4 10 Information to be recorded .4 11 Information to be reported4 12 Declaration and verification of noise emission values4 BS EN ISO 9902-5:2001+A2:2014 ISO 9902-5:2001+A2:2014 (E)ISO 20995:(1002)E iv Foreword ISO (the International Organization for Standardization) is a wo
37、rldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented o
38、n that committee. International organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted
39、in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Att
40、ention is drawn to the possibility that some of the elements of this part of ISO 9902 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 99025 was prepared by Technical Committee ISO/TC 72, Textile machiner
41、y and machinery for drycleaning and industrial laundering, Subcommittee SC 8, Safety requirements for textile machinery. This first edition of ISO 99025, together with ISO 99021, ISO 99022, ISO 99023, ISO 99024, ISO 99026 and ISO 99027, cancels and replaces ISO 9902:1993, which has been technically
42、revised. ISO 9902 consists of the following parts, under the general title Textile machinery Noise test code: Part 1: Common requirements Part 2: Spinning preparatory and spinning machinery Part 3: Nonwoven machinery Part 4: Yarn processing, cordage and rope manufacturing machinery Part 5: Weaving a
43、nd knitting preparatory machinery Part 6: Fabric manufacturing machinery Part 7: Dyeing and finishing machinery BS EN ISO 9902-5:2001+A2:2014 ISO 9902-5:2001+A2:2014 (E)INTENRATIONAL TSANDADR ISO 20995:(1002)E 1 Textile machinery Noise test code Part 5: Weaving and knitting preparatory machinery 1 S
44、cope This part of ISO 9902, taken together with ISO 99021, specifies the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by weaving and knitting preparatory machinery. It is applicable to engineering (grade 2) and survey (grade
45、 3) methods, in accordance with the International Standards to which it makes normative reference, and to machines of different types used as defined in ISO 2544 for warping, beaming and sizing. 2 Normative references The following normative documents contain provisions which, through reference in t
46、his text, constitute provisions of this part of ISO 9902. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 9902 are encouraged to investigate the possibility of applying the most recent e
47、ditions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 2544, Textile machinery and accessories Warping machinery Preparation of warp for weaving Vocabulary. ISO 3744, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane
