1、BRITISH STANDARD BS EN ISO 10417:2004 Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress The European Standard EN ISO 10417:2004 has the status of a British Standard ICS 75.180.10 BS EN ISO 10417:2004 This British Standard was published u
2、nder the authority of the Standards Policy and Strategy Committee on 2 August 2004 BSI 2 August 2004 ISBN 0 580 44170 9 National foreword This British Standard is the official English language version of EN ISO 10417:2004. It is identical with ISO 10417:2004. The UK participation in its preparation
3、was entrusted by Technical Committee PSE/17, Materials and equipment for petroleum, petrochemical and natural gas industries, to Subcommittee PSE/17/-/4, Drilling and production equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on re
4、quest to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI
5、 Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirer
6、s to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This documen
7、t comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page, pages 1 to 31 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since
8、 publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO10417 July2004 ICS75.180.10 Englishversion PetroleumandnaturalgasindustriesSubsurfacesafetyvalve systemsDesign,installation,operationandredress(ISO 10417:2004) IndustriesduptroleetdugaznaturelSystmesde vannesdescu
9、ritdefonddepuitsConception, installation,fonctionnementetrectification(ISO 10417:2004) ThisEuropeanStandardwasapprovedbyCENon7June2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalter
10、ation.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberi
11、ntoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,
12、Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnation
13、alMembers. Ref.No.ENISO10417:2004:E I NESO 01:7142004 (E) 2 Foreword This document (EN ISO 10417:2004) has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Mater
14、ials, equipment and offshore structures for petroleum and natural gas industries“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conf
15、licting national standards shall be withdrawn at the latest by January 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, F
16、inland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 10417:2004 has been approved by CEN as EN ISO 10417:20
17、04 without any modifications. ENISO10417:2004 Reference number ISO 10417:2004(E) OSI 4002INTERNATIONAL STANDARD ISO 10417 Second edition 2004-07-01 Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress Industries du ptrole et du gaz naturel
18、Systmes de vannes de protection de fond de puits tude, installation, fonctionnement et rparation ENISO10417:2004IS:71401 O4002(E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess
19、 the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo k
20、r Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In t
21、lnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ISO 4002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, incli
22、dung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa Ot tsserdda eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pul
23、bisdehi n Switlrez dnaii ISO 4002 Allr ithgsr esedevrENISO10417:2004IS:71401 O4002(E) I SO 4002 All irthgs ersedevr iiiContents Page Foreword iv Introduction v 1 Scope 1 2 Normative references. 1 3 Terms and definitions. 1 4 Abbreviated terms. 4 5 System configuration. 4 5.1 General. 4 5.2 System re
24、quirements 6 5.3 Equipment requirements 10 5.4 Documentation and data control. 13 Annex A (normative) SSSV Redress report (minimum data requirements). 15 A.1 General data 15 A.2 Redress test summary 15 Annex B (informative) Installation 16 B.1 General. 16 B.2 Surface-controlled subsurface safety val
25、ve. 16 B.3 Surface control system 17 B.4 Subsurface-controlled subsurface safety valves Application to multiple and single completions . 18 Annex C (informative) Operations. 19 C.1 General. 19 C.2 Operation and testing. 19 C.3 Recommendations and required documentation 19 C.4 Review and responsibili
26、ties of ESD system testing 20 C.5 Important information on system shutdown20 Annex D (informative) Sizing of subsurface-controlled safety valves 21 D.1 General. 21 D.2 Velocity-type SSCSV. 21 D.3 Low-tubing-pressure-type SSCSV 22 Annex E (informative) SSSV Testing 26 E.1 Procedure for testing instal
27、led surface-controlled subsurface safety valves Standard depth. 26 E.2 Test procedure for installed surface-controlled subsurface safety valves Deepwater installations . 27 E.3 Test procedure for installed subsurface-controlled subsurface safety valves 28 Annex F (normative) Failure reporting . 29 F
28、.1 Failure reporting 29 F.2 Minimum information 29 Bibliography . 31 ENISO10417:2004IS:71401 O4002(E) iv I SO 4002 All irthgs ersedevrForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing In
29、ternational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison
30、with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of techn
31、ical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn
32、 to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10417 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, pe
33、trochemical and natural gas industries, Subcommittee SC 4, Drilling and production equipment. This second edition cancels and replaces the first edition (ISO 10417:1993), which has been technically revised. ENISO10417:2004IS:71401 O4002(E) I SO 4002 All irthgs ersedevr vIntroduction This Internation
34、al Standard has been developed by users/purchasers and suppliers/manufacturers of subsurface safety valve (SSSV) equipment intended for use in the petroleum and natural gas industry worldwide. This International Standard is intended to give requirements and information to both parties on the design,
35、 operation, installation and testing of subsurface safety valve system equipment and also the storage/transport, maintenance, and redress of the SSSV equipment. Users of this International Standard should be aware that further or differing requirements might be needed for individual installations, s
36、torage/transport and maintenance. This International Standard is not intended to inhibit the user/purchaser from accepting alternative engineering solutions. This may be particularly applicable where there is innovative or developing well-completion technology. ENISO10417:2004blank ENISO10417:2004IN
37、TENRATIONAL TSANDADR IS:71401 O4002(E)I SO 4002 All irthgs ersedevr 1Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress 1 Scope This International Standard establishes requirements and provides guidelines for configuration, installation,
38、test, operation and documentation of subsurface safety valve (SSSV) systems. In addition, this International Standard establishes requirements and provides guidelines for selection, handling, redress and documentation of SSSV downhole production equipment. This International Standard is not applicab
39、le to repair activities. NOTE ISO 10432 provides requirements for SSSV equipment repair. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition
40、of the referenced document (including any amendments) applies. ISO 9000, Quality management systems Fundamentals and vocabulary ISO 9712, Non-destructive testing Qualification and certification of personnel ISO 10432: 1) , Petroleum and natural gas industries Downhole equipment Subsurface safety val
41、ve equipment ISO 16070, Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples ANSI/NCSL Z 540-1, Calibration Calibration Laboratories and Measuring and Test Equipment General Requirements 3 Terms and definitions For the purposes of this document, the terms and def
42、initions given in ISO 9000 and the following apply. 3.1 control line conduit utilized to transmit control signals to SCSSVs 3.2 emergency shutdown system system of stations which, when activated, initiate facility shutdown 3.3 equalizing feature SSSV mechanism which permits the well pressure to bypa
43、ss the SCSSV closure mechanism 1) To be published. ENISO10417:2004IS:71401 O4002(E) 2 I SO 4002 All irthgs ersedevr3.4 fail-safe device device which, upon loss of the control medium, automatically shifts to a safe position 3.5 fail-safe setting depth maximum true vertical depth at which an SCSSV can
44、 be set and closed under worst-case hydrostatic conditions 3.6 maintenance service operations performed on SSSV system equipment as part of routine operations 3.7 manufacturer principal agent in the design, fabrication and furnishing of original SSSV system equipment 3.8 operating manual publication
45、 issued by the manufacturer, which contains detailed data and instructions related to the design, installation, operation and maintenance of SSSV system equipment 3.9 operator user of SSSV system equipment ISO 10432 3.10 orifice designed restriction which causes the pressure drop in velocity-type SS
46、CSVs 3.11 packaging enclosure(s) of sufficient structural integrity to protect contents from damage or contamination, including impacts and environmental conditions encountered during the various phases of transport 3.12 qualified part part manufactured under a recognized quality assurance programme
47、 and, in the case of replacement, produced to meet or exceed the performance of the original part produced by the original equipment manufacturer (OEM) NOTE ISO 9001 is an example of a recognized quality assurance programme. 3.13 qualified personnel personnel with characteristics or abilities, gaine
48、d through training and/or experience as measured against established requirements, standards or tests, that enable the individual to perform a required function 3.14 redress any activity involving the replacement of qualified parts (3.12) within the limits described in 5.3.3 3.15 repair any activity beyond the scope of redress that includes disassembly, re-assembly and testing, with or without the replacement of qualified parts, and may include machining, welding, heat-treating or
