1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN ISO 11248:2000 BS 2
2、782-1 Method 136:2000 Incorporating Amendment No. 1 to BS 2782-1 Method 136:1994 (renumbers the BS as BS EN ISO 11248:2000) IMPORTANT NOTE. Before reading this method it is essential to read BS 2782-0, Introduction, issued separately. The European Standard EN ISO 11248:1999 has the status of a Briti
3、sh Standard ICS 83.080.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Plastics thermosetting moulding materials Evaluation of short-term performance at elevated temperaturesThis British Standard, having been prepared under the direction of the Plastics and Rubber Standards
4、 Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 May 1994 BSI 02-2000 The following BSI references relate to the work on this standard: Committee reference PRM/21 Draft for comment 92./39928 DC ISBN 0 580 23328 6 BS EN ISO 11248:2000 Amendments
5、issued since publication Amd. No. Date Comments 10687 February 2000 Implements the European Standard Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Plastics and Rubber Standards Policy Committee (PRM/-) to Technical Committee PRM/21, up
6、on which the following bodies were represented: British Plastics Federation British Textile Confederation Department of the Environment (Building Research Establishment) Department of Trade and Industry (National Physical Laboratory) Electrical and Electronic Insulation Association (BEAMA Ltd.) GAMB
7、ICA (BEAMA Ltd.) Institute of Materials Ministry of Defence Packaging and Industrial Films Association Pira International RAPRA Technology Ltd.BS EN ISO 11248:2000 BSI 02-2000 i National foreword This British Standard is the English language version of EN 11248:1999. It is identical with ISO 11248:1
8、993. It retains the dual identifier BS 2782-1 Method 136 for ease of reference. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards catalogue under the section entitled “International Standards Correspondence Ind
9、ex” or by using the “Find” facility of the BSI Standards Electronic Catalogue. The Technical Committee has reviewed the provisions of IEC 216-2, which normative reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. Warning. This British St
10、andard, does not necessarily detail all the precautions necessary to meet the requirements of the Health and Safety at Work etc. Act 1974. Attention should be paid to any appropriate safety precautions and the method should be operated only by trained personnel. A British Standard does not purport t
11、o include all necessary provisions of a contract, Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pag
12、es i and ii, the EN ISO title page, the EN ISO foreword, pages 1 to 4, an inside back cover and a back cover.ii blank3EN ISO 11248:1999 4BS EN ISO 11248:2000 BS 2782-1 Method 136:2000 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
13、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It pr
14、esents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of
15、BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996
16、9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Service
17、s. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on nat
18、ional, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Sub
19、scribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI pub
20、lications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic,
21、 photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
