EN ISO 11623-2002 Transportable Gas Cylinders - Periodic Inspection and Testing of Composite Gas Cylinders《可运输气瓶 复合气瓶的周期性检测和试验 ISO 11623-2002》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 4003-1-2014 Concept for the design of 3D models based on properties according to DIN 4000 - Part 1 Overview and fundamental principles《基于DIN 4000标准特性的3D图像的设计概念 第1部分 概述和基本原则》.pdf

DIN 4003-126-2012 Concept for the design of 3D models based on properties according to DIN 4000 - Part 126 Reamers with non-indexable cutting edges《符合DIN 4000标准的基于性能的3D模型设计概念 第126部.pdf

DIN 4003-127-2013 Concept for the design of 3D models based on properties according to DIN 4000 - Part 127 Reamers for replaceable inserts《根据DIN 4000基于性能的三维模型设计概念 第127部分 可更换刀片的铰刀》.pdf

DIN 4003-171-2013 Concept for the design of 3D models based on properties according to DIN 4000 - Part 171 Replaceable inserts for drilling《根据DIN 4000基于性能的三维模型设计概念 第171部分 钻孔用可更换刀片》.pdf

DIN 4003-172-2013 Concept for the design of 3D models based on properties according to DIN 4000 - Part 172 Driven tool units《根据DIN 4000基于性能的三维模型设计概念 第172部分 可驱动工具组件》.pdf

DIN 4003-173-2013 Concept for the design of 3D models based on properties according to DIN 4000 - Part 173 Machine operated feed out tools and assembly parts《基于DIN 4000标准特性的3D图像的设计.pdf

DIN 4003-174-2014 Concept for the design of 3D models based on properties according to DIN 4000 - Part 174 Inserts for reaming《根据DIN 4000基于性能的三维模型设计概念 第174部分 铰孔用刀片》.pdf

DIN 4003-175-2016 Concept for the design of 3D models based on properties according to DIN 4000 - Part 175 Cassettes nests and cartridges for indexable inserts《根据DIN 4000基于性能的三维模型设.pdf

DIN 4003-178-2016 Concept for the design of 3D models based on properties according to DIN 4000 - Part 178 Probing systems stylus systems and styli《根据DIN 4000基于性能的三维模型设计概念 第178部分 探.pdf