1、Technical product documentation - Organization and naming of layers for CADPart 1: Overview and principles (ISO 13567-1:2017)BS EN ISO 13567-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13567-1 Novembe
2、r 2017 ICS 01.110; 35.240.10 Supersedes EN ISO 13567-1:2002English Version Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:2017) Documentation technique de produits - Organisation et dnomination des couches de CAO - Partie 1:
3、 Vue densemble et principes (ISO 13567-1:2017) Technische Produktdokumentation - Gliederung und Benennung von Layern fr CAD - Teil 1: bersicht und Grundlagen (ISO 13567-1:2017) This European Standard was approved by CEN on 19 October 2017. CEN members are bound to comply with the CEN/CENELEC Interna
4、l Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CE
5、N member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versi
6、ons. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, P
7、oland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of ex
8、ploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13567-1:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 13567-1:2017. It is identical to ISO 13567-1:2017. It supersedes BS EN ISO 13567-1:2002, which is withdrawn.The
9、 UK participation in its preparation was entrusted to Technical Committee B/555, Construction design, modelling and data exchange.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provision
10、s of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 92517 7ICS 35.240.10; 01.110Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publ
11、ished under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 135671:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13567-1 November 2017 ICS 01.110; 35.240.10 Super
12、sedes EN ISO 13567-1:2002English Version Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:2017) Documentation technique de produits - Organisation et dnomination des couches de CAO - Partie 1: Vue densemble et principes (ISO 1
13、3567-1:2017) Technische Produktdokumentation - Gliederung und Benennung von Layern fr CAD - Teil 1: bersicht und Grundlagen (ISO 13567-1:2017) This European Standard was approved by CEN on 19 October 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
14、conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard e
15、xists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national
16、standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia,
17、Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any
18、means reserved worldwide for CEN national Members. Ref. No. EN ISO 13567-1:2017 EBS EN ISO 135671:2017EN ISO 13567-1:2017 (E) 3 European Foreword This document (EN ISO 13567-1:2017) has been prepared by Technical Committee ISO/TC 10 “Technical product documentation” in collaboration with CCMC. This
19、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2018 and conflicting national standards shall be withdrawn at the latest by May 2018. Attention is drawn to the possibility that some of the elements
20、 of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 13567-1:2002. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are
21、 bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Por
22、tugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 13567-1:2017 has been approved by CEN as EN ISO 13567-1:2017 without any modification. ISO 13567-1:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative referenc
23、e . 13 Terms and definitions . 14 General 25 Fundamental principles 25.1 Organizational convention 25.2 Layer name format convention . 25.3 Code convention 3Bibliography 4 ISO 2017 All rights reserved iiiContents PageBS EN ISO 135671:2017ISO 13567-1:2017(E)Foreword ivIntroduction v1 Scope . 12 Norma
24、tive reference . 13 Terms and definitions . 14 General 25 Fundamental principles 25.1 Organizational convention 25.2 Layer name format convention . 25.3 Code convention 3Bibliography 4 ISO 2017 All rights reserved iiiContents PageBS EN ISO 135671:2017ISO 13567-1:2017(E)ForewordISO (the International
25、 Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been est
26、ablished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardiz
27、ation.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance wi
28、th the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
29、patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.F
30、or an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www
31、.iso.org/iso/foreword.htmlThis document was prepared by Technical Committee ISO/TC 10, Technical product documentation, Subcommittee SC 8, Construction documentation.This second edition cancels and replaces the first edition (13567-1:1998), of which it constitutes a minor revision to update the Bibl
32、iography.A list of all parts in the ISO 13567 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 135671:2017ISO 13567-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The
33、 work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-gove
34、rnmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in
35、 the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the po
36、ssibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list
37、 of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related
38、to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.htmlThis document was prepared by Technical Committee ISO/TC 10, Technical product documenta
39、tion, Subcommittee SC 8, Construction documentation.This second edition cancels and replaces the first edition (13567-1:1998), of which it constitutes a minor revision to update the Bibliography.A list of all parts in the ISO 13567 series can be found on the ISO website.iv ISO 2017 All rights reserv
40、ed ISO 13567-1:2017(E)IntroductionThe ISO 13567 series consists of two parts which deal with CAD layer organization and naming. ISO 13567-1 has a general application whereas ISO 13567-2 is applicable to construction projects.The purpose of the ISO 13567 series is to establish a common international
41、basis for organizing data in CAD systems that covers the structuring of data into layers. ISO 2017 All rights reserved vBS EN ISO 135671:2017Technical product documentation Organization and naming of layers for CAD Part 1: Overview and principles1 ScopeThis document establishes the general principle
42、s of layer structuring within CAD files. Layers are used to control visibility and to manage and communicate CAD file data. Layer names are used to represent this structure.The principles are applicable to all parties involved in preparing and using technical documentation on computer systems. Altho
43、ugh these principles are primarily for users, CAD system developers are expected to provide software tools capable of implementing and supporting this document. An important use is also to structure data in component libraries produced by third parties.2 Normative referenceThere are no normative ref
44、erences in this document.3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: ISO Online browsing platform: available at http:/www.iso.org/obp IEC Elect
45、ropedia: available at http:/www.electropedia.org/3.1layerorganizational attribute of entities in a CAD data file, used to separate data in order to manage and communicate those data and to control visibility on the computer screen and on plotted drawingsNote 1 to entry: In CAD systems, synonyms for
46、“layer” are used, for example “level”.3.2CAD modelstructured CAD data file(s) organized according to the physical parts of the objects represented, for example a building or a mechanical deviceNote 1 to entry: Models can be two-dimensional or three-dimensional, and can include graphical as well as n
47、on-graphical data attached to the objects.3.3CAD drawingselected parts of a CAD model as presented on screen or on paperNote 1 to entry: Visibility on the drawing can be controlled by views and layers. The drawing can contain additional graphics, such as border lines, title block and legends. CAD dr
48、awings can also be produced independently without an underlying CAD model (a drawing-oriented approach as opposed to the model-oriented approach).INTERNATIONAL STANDARD ISO 13567-1:2017(E) ISO 2017 All rights reserved 1BS EN ISO 135671:2017Technical product documentation Organization and naming of l
49、ayers for CAD Part 1: Overview and principles1 ScopeThis document establishes the general principles of layer structuring within CAD files. Layers are used to control visibility and to manage and communicate CAD file data. Layer names are used to represent this structure.The principles are applicable to all parties involved in preparing and using technical documentation on computer systems. Although these principles are primarily for users, CAD system developers are expected to provide software tools capable of implementing and
