1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 14890:2013Conveyor belts Specificationfor rubber- or plastics-coveredconveyor belts of textileconstruction for general useBS EN ISO 14890:2013 BRITISH STANDARDNational
2、forewordThis British Standard is the UK implementation of EN ISO 14890:2013. It is identical to ISO 14890:2013. It supersedes BS EN ISO 14890:2003, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PRI/67, Conveyor belts.A list of organizations represent
3、ed on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580
4、77358 7 ICS 53.040.20 Compliance with a British Standard cannot confer immunityfrom legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2013.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME E
5、UROPENNE EUROPISCHE NORM EN ISO 14890 February 2013 ICS 53.040.20 Supersedes EN ISO 14890:2003English Version Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013) Courroies transporteuses - Spcification pour courroies
6、transporteuses recouvertes de caoutchouc ou de plastique structure textile, dusage gnral (ISO 14890:2013) Frdergurte - Anforderungen an Textilfrdergurte mit Gummi- oder Kunststoff-Deckplatten fr allgemeine Anwendungen (ISO 14890:2013) This European Standard was approved by CEN on 21 January 2013. CE
7、N members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on app
8、lication to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC M
9、anagement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La
10、tvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1
11、000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14890:2013: EBS EN ISO 14890:2013 EN ISO 14890:2013 (E) 3 Foreword This document (EN ISO 14890:2013) has been prepared by Technical Committee ISO/TC 41 “Pulleys
12、andbelts (including veebelts)“ in collaboration with Technical Committee CEN/TC 188 “Conveyor belts” thesecretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by August 2
13、013, and conflicting national standards shall be withdrawn atthe latest by August 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.
14、 This document supersedes EN ISO 14890:2003. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former
15、Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14890:2013
16、has been approved by CEN as EN ISO 14890:2013 without any modification. BS EN ISO 14890:2013ISO 14890:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope 12 Normative references . 13 Terms and definitions . 14 Designation . 24.1 Belting designation . 24.2 Examples f
17、or ordering 35 Construction . 46 Length . 57 Width . 58 Rubber cover . 69 Tolerances on total belt thickness and cover thickness 79.1 Tolerance on total belt thickness 79.2 Tolerance on cover thickness 710 Transverse fabric joints in multi-ply belting 710.1 General . 710.2 Outer plies . 710.3 Inner
18、plies 810.4 Adjacent plies and non-adjacent plies 810.5 Joints in the same ply 810.6 Mono-ply, duo-ply and solid woven belting . 811 Longitudinal fabric joints in multi-ply belting and duo-ply belting 811.1 Spacing of joints 811.2 Number of joints 812 Longitudinal fabric or carcass joints in solid w
19、oven and mono-ply belting . 813 Elongation . 814 Full thickness tensile strength . 815 Adhesion 916 Troughability . 917 Sampling 1018 Identification .10Annex A (informative) Items to be agreed between the manufacturer and purchaser 11Annex B (informative) Helpful information to be supplied by the pu
20、rchaser .12Annex C (informative) Lateral drift Straight running 14Bibliography .15BS EN ISO 14890:2013ISO 14890:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Stan
21、dards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also t
22、ake part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is
23、 to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility
24、 that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 14890 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts), Subcommittee SC 3, Conveyor belts.This sec
25、ond edition cancels and replaces the first edition (ISO 14890:2003), of which it constitutes a minor revision. It also incorporates Technical Corrigendum ISO 14890:2003/Corr.1:2006.iv ISO 2013 All rights reservedBS EN ISO 14890:2013ISO 14890:2013(E)IntroductionIn the preparation of this Internationa
26、l Standard, consideration has been given to the work of ISO Technical Committee ISO/TC41/SC3, and the following International Standards for conveyor belts have been followed as closely as possible: ISO 251; ISO 252; ISO 282; ISO 283; ISO 433; ISO 583; ISO 703. ISO 2013 All rights reserved vBS EN ISO
27、 14890:2013BS EN ISO 14890:2013Conveyor belts Specification for rubber- or plastics-covered conveyor belts of textile construction for general use1 ScopeThis International Standard specifies requirements for rubber and/or plastics covered conveyor belting of textile construction for general surface
28、use on flat or troughed idlers.This International Standard is not suitable or valid for light conveyor belts as described in ISO 21183-1.Items that are not requirements of this International Standard, but need to be agreed between the manufacturer and the purchaser, are included in Annex A.A list of
29、 the details intended to be supplied by the purchaser of belting with an enquiry is given in Annex B.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the late
30、st edition of the referenced document (including any amendments) applies.ISO 37, Rubber, vulcanized or thermoplastic Determination of tensile stress-strain propertiesISO 188, Rubber, vulcanized or thermoplastic Accelerated ageing and heat resistance testsISO 252, Conveyor belts Adhesion between cons
31、titutive elements Test methodsISO 282, Conveyor belts SamplingISO 283, Textile conveyor belts Full thickness tensile strength, elongation at break and elongation at the reference load Test methodISO 583, Conveyor belts with a textile carcass Total belt thickness and thickness of constitutive element
32、s Test methodsISO 703, Conveyor belts Transverse flexibility (troughability) Test methodISO 4649, Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum deviceISO 10247, Conveyor belts Characteristics of covers ClassificationISO 16851, Textile conv
33、eyor belts Determination of the net length of an endless(spliced) conveyor beltEN 12882, Conveyor belting for general purpose use Electrical and flammability safety requirements3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1tensile strengthgrea
34、test measured force during the tensile test divided by the width of the test pieceNOTE It is expressed in newton per millimetre (N/mm).INTERNATIONAL STANDARD ISO 14890:2013(E) ISO 2013 All rights reserved 1BS EN ISO 14890:2013ISO 14890:2013(E)3.2reference forcereference loadone tenth of the nominal
35、tensile strength in the longitudinal direction multiplied by the width of the test piece in millimetresNOTE It is expressed in Newton.EXAMPLENominal tensile strength = 1 600 N/mm;reference force = 160N/mm;reference force for 25 mm test piece = 25mm 160 N/mm = 4 000 N.3.3slab beltingconveyor belting
36、made in wide widths and long lengths for subsequent slitting and cutting into narrower widths and shorter lengths to suit individual conveyor installations3.4solid woven beltingconveyor belting consisting of a carcass of more than one ply, the plies being interlocked in the weave or bound together b
37、y binding threads in the course of weaving3.5mono-ply beltingconveyor belting with a carcass consisting of one ply of woven textile fabric3.6duo-ply beltingconveyor belting with a carcass consisting of two plies of woven textile fabric, bonded together by an intermediate layer of elastomer of suffic
38、ient thickness to allow the incorporation of a tension element in the joint3.7multi-ply beltingconveyor belting with a carcass of two or more plies of woven textile fabric, the adjacent plies being bonded together by an intermediate layer of elastomer3.8primary yarnload carrying yarn that contribute
39、s more than 50 % of the tensile strength3.9secondary yarnload carrying yarn that contributes less than 50 % of the tensile strength4 Designation4.1 Belting designationBelting is designated by reference to the following conveyor belt characteristics:a) a reference to this International Standard, i.e.
40、 ISO 14890;b) the required length, in metres;c) the required width, in millimetres (see Table 4);d) the fibre type of the carcass, in both the warp and weft directions, e.g. polyester (E) (warp) and polyamide (P) (weft) (EP) (see Table 1);2 ISO 2013 All rights reservedBS EN ISO 14890:2013ISO 14890:2
41、013(E)e) the full thickness tensile strength, in newton per millimetre, of belt width (see Table 8);f) the number of plies or belt type (see Clause 3);g) the top cover thickness, in millimetres;h) the bottom cover thickness, in millimetres (where relevant, see Clause 5);i) the cover classification (
42、see Table 5), where appropriate;j) the safety category in accordance with EN 12882.4.2 Examples for ordering The following are examples for ordering.a) EXAMPLE 1 Multi-ply beltA 400 m long belt, 1 200 mm wide, textile material in the longitudinal direction of polyester (E) and in the transverse dire
43、ction of polyamide (P), having a minimum full thickness tensile strength of 1 000 N/mm belt width, with five plies and a top cover thickness of 4 mm, a bottom cover thickness of 2 mm, a cover classification of H in accordance with Table 5, and complying with the safety requirements of category 1 of
44、EN 12882.Example 1 DesignationISOLength Width TextilematerialTensile strengthNo. of pliesCover gaugemmCover classSafety category in accord- ance with EN 1288214890 m mm Warp Weft N/mm Top Bottom400 1 200 E P 1 000 5 4 2 H 1b) EXAMPLE 2 Duo-ply beltA 200 m long belt, 1 000 mm wide, textile material i
45、n the longitudinal direction of polyester cotton (EB) and in the transverse direction of polyamide cotton (PB), having a minimum full thickness tensile strength of 800 N/mm, with two plies and a top and bottom cover of 1,5 mm, complying with the safety requirements of category 2A of EN 12882.Example
46、 2 DesignationISOLength Width TextilematerialTensile strengthNo. of pliesCover gaugemmCover classSafety category in accord- ance with EN 1288214890 m mm Warp Weft N/mm Top Bottom200 1 000 EB PB 800 5 1,5 1,5 N/A 2Ac) EXAMPLE 3 Mono-plyA 150 m long, 1 200 mm wide Mono-ply belt, having a polyester war
47、p (E) and a polyamide weft (P), a full thickness tensile strength of 630 N/mm belt width and a top cover thickness of 6 mm, a bottom cover thickness of 2 mm, and a cover classification of D in accordance with Table 5, complying with safety requirement of category 1 of EN 12882.Example 3 Designation
48、ISO 2013 All rights reserved 3BS EN ISO 14890:2013ISO 14890:2013(E)ISOLength Width TextilematerialTensile strengthNo. of pliesCover gaugemmCover classSafety category in accord- ance with EN 1288214890 m mm Warp Weft N/mm Top Bottom150 1 200 E P 630 1 6 2 D 1d) EXAMPLE 4 Solid woven beltA 300 m long,
49、 1 600 mm wide Solid Woven belt having a combined polyester and polyamide warp (EP) and a polyamide cotton weft (PB) and an integrally woven cotton (B) warp pile, having a minimum tensile strength of 1 250 N/mm belt width and 1,5 mm top and bottom covers, complying with safety requirement of category 3A of EN 12882.Example 4 DesignationISOLength Width TextilematerialTensile strengthNo. of pliesCover gaugemmCover classSafety category in accord- ance with EN 1288214890 m mm Warp Weft N/mm Top
