1、BS EN ISO 16120-1:2011Non-alloy steel wire rod forconversion to wirePart 1: General requirements (ISO16120-1:2011)BS EN ISO 16120-1:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO16120-1:2011. It supersedes BS EN 10016-1:1995 which is withdrawn.The UK p
2、articipation in its preparation was entrusted to TechnicalCommittee ISE/106, Wire Rod and Wire.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsibl
3、e for its correctapplication. BSI 2011ISBN 978 0 580 59720 6ICS 77.140.60; 77.140.65Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2011.Amendments issued
4、since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16120-1 July 2011 ICS 77.140.60 Supersedes EN 10016-1:1994English Version Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2011) Fil-machine en acier non alli destin
5、 la fabrication de fils - Partie 1: Exigences gnrales (ISO 16120-1:2011) Walzdraht aus unlegiertem Stahl zum Ziehen - Teil 1: Allgemeine Anforderungen (ISO 16120-1:2011) This European Standard was approved by CEN on 30 June 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulati
6、ons which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
7、This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN m
8、embers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spa
9、in, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national M
10、embers. Ref. No. EN ISO 16120-1:2011: EBS EN ISO 16120-1:2011EN ISO 16120-1:2011 (E) 3 Foreword This document (EN ISO 16120-1:2011) has been prepared by Technical Committee ISO/TC 17 “Steel“ in collaboration with Technical Committee ECISS/TC 106 “Wire rod and wires” the secretariat of which is held
11、by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at the latest by January 2012. Attention is drawn to the possibility t
12、hat some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10016-1:1994. According to the CEN/CENELEC Internal Regulations, the national standards organizat
13、ions of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga
14、l, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 16120-1:2011 has been approved by CEN as a EN ISO 16120-1:2011 without any modification. BS EN ISO 16120-1:2011ISO 16120-1:2011(E) ISO 2011 All rights reserved iiiContents Page Forew
15、ord iv 1 Scope1 2 Normative references1 3 Terms and definitions .2 4 Classification .2 5 Ordering information to be supplied by the purchaser.3 6 Production process.4 7 Requirements.4 7.1 General .4 7.2 Quality system .4 7.3 Method of delivery.4 7.4 Delivery condition .4 8 Dimensions, mass and toler
16、ances 4 9 Inspection.4 9.1 Inspection and inspection documents4 9.2 Extension of inspection5 9.3 Acceptance unit, number of samples and test pieces 5 9.4 Sampling and preparation of samples and test pieces .6 9.5 Test methods .6 9.6 Retest7 10 Marking.7 11 Disputes7 Annex A (normative) Determination
17、 of core segregation.8 Annex B (informative) Measurement of surface discontinuities11 Annex C (informative) Mechanical damage14 Annex D (normative) Determining the percentage of resolvable pearlite.19 Bibliography21 BS EN ISO 16120-1:2011ISO 16120-1:2011(E) iv ISO 2011 All rights reservedForeword IS
18、O (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical co
19、mmittee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electro
20、technical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the me
21、mber bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identif
22、ying any or all such patent rights. ISO 16120-1 was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 17, Steel wire rod and wire products. This second edition cancels and replaces the first edition (ISO 16120-1:2001), which has been technically revised. ISO 16120 consists of the fol
23、lowing parts, under the general title Non-alloy steel wire rod for conversion to wire: Part 1: General requirements Part 2: Specific requirements for general-purpose wire rod Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod Part 4: Specific requirements for w
24、ire rod for special applications BS EN ISO 16120-1:2011INTERNATIONAL STANDARD ISO 16120-1:2011(E) ISO 2011 All rights reserved 1Non-alloy steel wire rod for conversion to wire Part 1: General requirements 1 Scope 1.1 ISO 16120 is applicable to wire rod of non-alloy steel intended for wire drawing an
25、d/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface. 1.2 This part of ISO 16120 covers general requirements and is not applicable to products for
26、which standards exist or are in development, for example: steel wire rod intended for heat treatment; free-cutting steel wire rod; steel wire rod for cold heading and cold extrusion; steel wire rod intended for the production of electrodes and products for welding; steel wire rod for welded fabric f
27、or reinforcement for concrete; steel wire rod for ball and roller bearings (see ISO 683-17); steel wire rod for wire for high fatigue strength mechanical springs, such as valve springs. 1.3 In addition to the requirements of this part of ISO 16120, the general technical delivery requirements specifi
28、ed in ISO 404 apply. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3
29、77, Steel and steel products Location and preparation of samples and test pieces for mechanical testing ISO 404:1992, Steel and steel products General technical delivery requirements ISO 3887, Steels Determination of depth of decarburization ISO 4885, Ferrous products Heat treatments Vocabulary ISO
30、4948-1, Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition BS EN ISO 16120-1:2011ISO 16120-1:2011(E) 2 ISO 2011 All rights reservedISO 4948-2, Steels Classification Part 2: Classification of unalloyed and alloy steels according to mai
31、n quality classes and main property or application characteristics ISO 6892-1, Metallic materials Tensile testing Part 1: Method of test at room temperature ISO 6929, Steel products Definitions and classification ISO/TR 9769, Steel and iron Review of available methods of analysis ISO 10474, Steel an
32、d steel products Inspection documents ISO 14284, Steel and iron Sampling and preparation of samples for the determination of chemical composition ISO 16120-2:2011, Non-alloy steel wire rod for conversion to wire Part 2: Specific requirements for general-purpose wire rod ISO 16120-3:2011, Non-alloy s
33、teel wire rod for conversion to wire Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod ISO 16120-4:2011, Non-alloy steel wire rod for conversion to wire Part 4: Specific requirements for wire rod for special applications ISO 16124, Steel wire rod Dimensions an
34、d tolerances 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 377, ISO 404, ISO 4885, ISO 4948-1, ISO 4948-2 and ISO 6929 and the following apply. 3.1 rod hot-rolled finished product hot-wound into irregular coils NOTE Rod used for wire-drawing purpos
35、es in coil form is generally termed wire rod. 3.2 heat analysis chemical analysis representative of the heat, by a method determined at the steelmakers discretion NOTE Adapted from ISO 404:1992. 3.3 product analysis chemical analysis carried out on a sample of the product taken after the final hot r
36、olling operation NOTE Adapted from ISO 404:1992. 3.4 resolvable pearlite two-phased structure in which ferrite and iron carbide lamellae can be clearly observed under optical microscopy in certain conditions 4 Classification The classification of the steel grades covered by this part of ISO 16120 is
37、 indicated in ISO 16120-2, ISO 16120-3 and ISO 16120-4 for the corresponding steel grades. BS EN ISO 16120-1:2011ISO 16120-1:2011(E) ISO 2011 All rights reserved 35 Ordering information to be supplied by the purchaser The following information shall be supplied by the purchaser at the time of enquir
38、y and order, to enable the supplier to comply satisfactorily with the requirements of ISO 16120: a) quantity to be delivered; b) cross-section and product type (round wire rod, square wire rod, hexagonal wire rod, etc.); c) nominal dimensions of the wire rod and tolerance class in accordance with IS
39、O 16124 (if another tolerance class such as T1 is required); d) reference to the relevant part of ISO 16120, i.e. ISO 16120-2; e) steel grade, including any variations, and/or the addition of other elements, as permitted in ISO 16120-2 and ISO 16120-4; for steels according to ISO 16120-2 and ISO 161
40、20-4, wire rod can also be ordered by the mean tensile strength; see Clause 3 and 4.6 of ISO 16120-2:2011 and Clause 3 and 4.8 of ISO 16120-4:2011; f) the type of inspection and inspection document in accordance with ISO 10474 (or in accordance with other regional standards, e.g. EN 10204, see the B
41、ibliography); g) surface condition (where different from the as-rolled condition); h) dimensions and mass of coils; i) where applicable, indication of the type of descaling (chemical cleaning or mechanical); j) where applicable, the amount of microalloying elements (see ISO 16120-2 and ISO 16120-4);
42、 k) where applicable, class B for the depth of decarburization (see ISO 16120-4); if nothing is mentioned in the order, class A will be delivered; l) where applicable, the microstructure (see ISO 16120-4:2011, 4.11); m) where applicable, suitability for galvanizing; n) where applicable, suitability
43、for direct drawing; o) where applicable, the quality system (see 7.2); p) where applicable, the method of binding and labelling. Items g) to p) are options. If the purchaser does not indicate a wish to implement any of these options, the supplier shall supply the product in accordance with the basic
44、 specifications of Items a) to f). The following are two ordering examples. EXAMPLE 1 For grades ordered according to chemical composition, 100 tonnes of round wire rod, nominal diameter of 12 mm with dimensional tolerances according to ISO 16124, class T1, steel grades ISO 16120-2 C52D in the as-ro
45、lled condition with an inspection document 3.1.B according to ISO 10474 100 t round wire rod ISO 16124-12,0T1 ISO 16120-2 C52D ISO 10474 inspection document 3.1.B EXAMPLE 2 For grades ordered according to tensile strength, 200 tonnes of round wire rod, nominal diameter of 5,5 mm with dimensional tol
46、erances according to ISO 16124, class T1, steel grades ISO 16120-4 C#D2 with tensile strength 1020 MPa in the as-rolled condition with an inspection document 3.1.B according to ISO 10474. BS EN ISO 16120-1:2011ISO 16120-1:2011(E) 4 ISO 2011 All rights reserved200 t round wire rod ISO 16124-5,5T1 ISO
47、 16120-4 C#D2-1020 ISO 10474 inspection document 3.1.B NOTE # means “to be left blank” since the carbon content is at the discretion of the supplying mill, and the supplying mill indicates the exact number of # based on the grade designation until shipment. See Table 1 of ISO 16120-2:2011 and ISO 16
48、120-4:2011, respectively, for the grade designation. 6 Production process At the request of the purchaser at the time of enquiry and ordering, the steel making and manufacturing process shall be made known to the purchaser. Those processes that are specifically agreed upon shall not be changed witho
49、ut the prior agreement of the purchaser. 7 Requirements 7.1 General Suppliers are responsible, using the means they think fit, for inspecting their product in accordance with various quality criteria specified. In view of the practical difficulties in inspecting a coil of wire rod along its entire length, it cannot be proved that no value greater than the specified limits is to be found in the coil as a whole. Statistical evaluation of performances applicable to all coils may be a
