1、BS EN ISO 16890-3:2016Air filters for generalventilationPart 3: Determination of the gravimetricefficiency and the air flow resistanceversus the mass of test dust captured (ISO16890-3:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 16890-3:2016 BRITISH
2、 STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 16890-3:2016. Together with BS EN ISO 16890-1:2016, BS EN ISO 16890-2:2016 and BS EN ISO 16890-4:2016 itsupersedes BS EN 779:2012 and DD ISO/TS 21220:2009 which are withdrawn.The UK participation in its preparation wa
3、s entrusted to Technical Committee MCE/21, Filters for gases and liquids.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct ap
4、plication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 81941 4 ICS 23.120; 91.140.30 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and S
5、trategy Committee on 31 December 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16890-3 December 2016 ICS 91.140.30 Supersedes EN 779:2012English Version Air filters for general ventilation - Part 3: Determinati
6、on of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016)Filtres air de ventilation gnrale - Partie 3: Dtermination de lefficacit gravimtrique et de la rsistance lcoulement de lair par rapport la quantit de poussire dessai retenue (ISO 1689
7、0-3:2016) Luftfilter fr die allgemeine Raumlufttechnik - Teil 3: Ermittlung des gravimetrischen Wirkungsgrades sowie des durchflusswiderstandes im Vergleich zu der aufgenommenen Masse von Prfstaub (ISO 16890-3:2016) This European Standard was approved by CEN on 19 September 2016. CEN members are bou
8、nd to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the C
9、EN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre
10、has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
11、Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 B
12、russels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16890-3:2016 EBS EN ISO 16890-3:2016EN ISO 16890-3:2016 (E) 3 European foreword This document (EN ISO 16890-3:2016) has been prepared by Technical Committee ISO/TC 14
13、2 “Cleaning equipment for air and other gases“ in collaboration with Technical Committee CEN/TC 195 “Air filters for general air cleaning” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or b
14、y endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for iden
15、tifying any or all such patent rights. This document supersedes EN 779:2012. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
16、 following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla
17、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 16890-3:2016 has been approved by CEN as EN ISO 16890-3:2016 without any modification. BS EN ISO 16890-3:2016ISO 16890-3:2016(E)Foreword ivIntrodu
18、ction v1 Scope . 12 Normative references 13 Terms and definitions . 13.1 Air flow and resistance 23.2 Test device 23.3 Gravimetric efficiency . 33.4 Other terms 44 Symbols and abbreviated terms . 45 General test device requirements 55.1 Test device requirements . 55.2 Test device preparation . 56 Lo
19、ading dust 67 Test equipment. 68 Qualification of test rig and apparatus 98.1 Schedule of qualification testing requirements 98.2 Dust feeder air flow rate . 98.3 Final filter efficiency qualification test 109 Test sequence dust-loading procedure 109.1 Test procedure for the filter 109.1.1 Preparati
20、on of the test device 109.1.2 Initial resistance to air flow . 109.2 Dust loading 109.2.1 Dust loading procedure . 109.2.2 Arrestance 119.2.3 Test dust capacity .1210 Reporting results 1210.1 General 1210.2 Required reporting elements 1210.2.1 Report values . 1210.2.2 Report summary .1210.2.3 Report
21、 details 14Annex A (informative) Resistance to air flow calculation19Bibliography .21 ISO 2016 All rights reserved iiiContents PageBS EN ISO 16890-3:2016ISO 16890-3:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO mem
22、ber bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmen
23、tal and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance
24、are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is
25、 drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or
26、 on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity asses
27、sment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 142, Cleaning equipment for air and other gases.This
28、 first edition of ISO 16890-3, together with ISO 16890-1, ISO 16890-2 and ISO 16890-4, cancels and replaces ISO/TS 21220:2009, which has been technically revised.ISO 16890 consists of the following parts, under the general title Air filters for general ventilation: Part 1: Technical specifications,
29、requirements and classification system based upon particulate matter efficiency (ePM) Part 2: Measurement of fractional efficiency and air flow resistance Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured Part 4: Conditioning method
30、 to determine the minimum fractional test efficiencyiv ISO 2016 All rights reservedBS EN ISO 16890-3:2016ISO 16890-3:2016(E)IntroductionThe effects of particulate matter (PM) on human health have been extensively studied in the past decades. The results are that fine dust can be a serious health haz
31、ard, contributing to or even causing respiratory and cardiovascular diseases. Different classes of particulate matter can be defined according to the particle size range. The most important ones are PM10, PM2,5and PM1. The U.S. Environmental Protection Agency (EPA), the World Health Organization (WH
32、O) and the European Union define PM10as particulate matter which passes through a size-selective inlet with a 50 % efficiency cut-off at 10 m aerodynamic diameter. PM2,5and PM1are similarly defined. However, this definition is not precise if there is no further characterization of the sampling metho
33、d and the sampling inlet with a clearly defined separation curve. In Europe, the reference method for the sampling and measurement of PM10is described in EN 12341. The measurement principle is based on the collection on a filter of the PM10fraction of ambient particulate matter and the gravimetric m
34、ass determination (see EU Council Directive 1999/30/EC of 22 April 1999).As the precise definition of PM10, PM2,5and PM1is quite complex and not simple to measure, public authorities, like the U.S. EPA or the German Federal Environmental Agency (Umweltbundesamt), increasingly use in their publicatio
35、ns the more simple denotation of PM10as being the particle size fraction less or equal to 10 m. Since this deviation to the above mentioned complex “official” definition does not have a significant impact on a filter elements particle removal efficiency, the ISO 16890 series refers to this simplifie
36、d definition of PM10, PM2,5and PM1.Particulate matter in the context of the ISO 16890 series describes a size fraction of the natural aerosol (liquid and solid particles) suspended in ambient air. The symbol ePMxdescribes the efficiency of an air cleaning device to particles with an optical diameter
37、 between 0,3 m and x m. The following particle size ranges are used in the ISO 16890 series for the listed efficiency values.Table 1 Optical particle diameter size ranges for the definition of the efficiencies , ePMxEfficiency Size range, mePM100,3 10ePM2,50,3 2,5ePM10,3 1Air filters for general ven
38、tilation are widely used in heating, ventilation and air-conditioning applications of buildings. In this application, air filters significantly influence the indoor air quality and, hence, the health of people, by reducing the concentration of particulate matter. To enable design engineers and maint
39、enance personnel to choose the correct filter types, there is an interest from international trade and manufacturing for a well-defined, common method of testing and classifying air filters according to their particle efficiencies, especially with respect to the removal of particulate matter. Curren
40、t regional standards are applying totally different testing and classification methods, which do not allow any comparison with each other, and thus hinder global trade with common products. Additionally, the current industry standards have known limitations by generating results which often are far
41、away from filter performance in service, i.e. overstating the particle removal efficiency of many products. With this new ISO 16890 series, a completely new approach for a classification system is adopted, which gives better and more meaningful results compared to the existing standards.The ISO 1689
42、0 series describes the equipment, materials, technical specifications, requirements, qualifications and procedures to produce the laboratory performance data and efficiency classification based upon the measured fractional efficiency converted into a particulate matter efficiency (ePM) reporting sys
43、tem.Air filter elements according to the ISO 16890 series are evaluated in the laboratory by their ability to remove aerosol particulate expressed as the efficiency values ePM1, ePM2,5and ePM10.The air filter elements can then be classified according to the procedures defined in ISO 16890-1. The par
44、ticulate removal efficiency of the filter element is measured as a function of the particle size in the range of 0,3 m to 10 m of the unloaded and unconditioned filter element as per the procedures defined in ISO 16890-2. After the initial particulate removal efficiency testing, the air filter eleme
45、nt is conditioned ISO 2016 All rights reserved vBS EN ISO 16890-3:2016ISO 16890-3:2016(E)according to the procedures defined in ISO 16890-4 and the particulate removal efficiency is repeated on the conditioned filter element. This is done to provide information about the intensity of any electrostat
46、ic removal mechanism which may or may not be present with the filter element for test. The average efficiency of the filter is determined by calculating the mean between the initial efficiency and the conditioned efficiency for each size range. The average efficiency is used to calculate the ePMxeff
47、iciencies by weighting these values to the standardized and normalized particle size distribution of the related ambient aerosol fraction. When comparing filters tested in accordance with the ISO 16890 series, the fractional efficiency values shall always be compared among the same ePMxclass (ex. eP
48、M1of filter A with ePM1of filter B). The test dust capacity and the initial arrestance of a filter element are determined as per the test procedures defined in this part of ISO 16890.vi ISO 2016 All rights reservedBS EN ISO 16890-3:2016INTERNATIONAL STANDARD ISO 16890-3:2016(E)Air filters for genera
49、l ventilation Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured1 ScopeThis part of ISO 16890 specifies the test equipment and the test methods used for measuring the gravimetric efficiency and resistance to air flow of air filter for general ventilation.It is intended for use in conjunction with ISO 16890-1, ISO 16890-2 and ISO 16890-4.The test method described in this part of ISO 16890 is applicable for air flow rates between 0,25 m3/s (900 m3/h,
