EN ISO 17632-2015 en Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nonalloy and fine grain steels - Classification《焊接消耗品.pdf

上传人:inwarn120 文档编号:726126 上传时间:2019-01-09 格式:PDF 页数:40 大小:2.09MB
下载 相关 举报
EN ISO 17632-2015 en Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nonalloy and fine grain steels - Classification《焊接消耗品.pdf_第1页
第1页 / 共40页
EN ISO 17632-2015 en Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nonalloy and fine grain steels - Classification《焊接消耗品.pdf_第2页
第2页 / 共40页
EN ISO 17632-2015 en Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nonalloy and fine grain steels - Classification《焊接消耗品.pdf_第3页
第3页 / 共40页
EN ISO 17632-2015 en Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nonalloy and fine grain steels - Classification《焊接消耗品.pdf_第4页
第4页 / 共40页
EN ISO 17632-2015 en Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nonalloy and fine grain steels - Classification《焊接消耗品.pdf_第5页
第5页 / 共40页
点击查看更多>>
资源描述

1、BSI Standards PublicationBS EN ISO 17632:2015W e l d i n g c o n s u m a b l e s T u b u l a r c o r e d e l e c t r o d e s f o r gas shielded and non-gas shielded metal arc welding of non- alloy and fine grain steels ClassificationBS EN ISO 17632:2015 BRITISH STANDARDNational forewordThis British

2、Standard is the UK implementation of EN ISO 17632:2015. It supersedes BS EN ISO 17632:2008 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee WEE/39, Welding consumables.A list of organizations represented on this committee can be obtained on request to i

3、ts secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 83851 4 ICS 25.160.20 Compliance with a British Standa

4、rd cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN I

5、SO 17632 December 2015 ICS 25.160.20 Supersedes EN ISO 17632:2008English Version Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) Produits consommables pour le soudage - Fils-le

6、ctrodes fourrs pour soudage larc avec ou sans gaz de protection des aciers non allis et des aciers grains fins - Classification (ISO 17632:2015) Schweizustze - Flldrahtelektroden zum Metall-Lichtbogenschweien mit und ohne Schutzgas von unlegierten Sthlen und Feinkornsthlen - Einteilung (ISO 17632:20

7、15) This European Standard was approved by CEN on 15 August 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical

8、references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of

9、a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Mace

10、donia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EURO

11、PISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17632:2015 EBS EN ISO 17632:2015EN ISO 17632:2015 (E) 3 European foreword This doc

12、ument (EN ISO 17632:2015) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national stan

13、dard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN

14、and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 17632:2008. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Au

15、stria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe

16、den, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17632:2015 has been approved by CEN as EN ISO 17632:2015 without any modification. BS EN ISO 17632:2015ISO 17632:2015(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Classification 24 Symbols and requ

17、irements 34.1 Symbol for the product/process 34.2 Symbol for tensile properties of all-weld metal or welded joint . 44.2.1 Multi-run technique 44.2.2 Single-run technique 44.3 Symbol for impact properties of all-weld metal or welded joint . 54.4 Symbol for chemical composition of all-weld metal. 64.

18、5 Symbol for type of electrode core or for the usability characteristics of the electrode . 94.6 Symbol for shielding gas . 94.7 Symbol for welding position 124.8 Symbol for hydrogen content of deposited metal 124.9 Symbol for condition of postweld heat treatment of all-weld metal .135 Mechanical te

19、sts .135.1 Multi-run technique . 135.1.1 Preheating and interpass temperatures .135.1.2 Procedure requirements for welding multi-run test assemblies 145.1.3 Post-weld heat treatment (PWHT) condition 155.2 Single-run technique . 156 Chemical analysis 157 Rounding procedure 158 Fillet weld test 159 Re

20、tests 1610 Technical delivery conditions 1711 Examples of designation 17Annex A (informative) Classification systems 21Annex B (informative) Description of types of electrode core in the classification system based upon yield strength and average impact energy of 47 J 24Annex C (informative) Descrip

21、tion of types of usability characteristics in the classification system based upon tensile strength and average impact energy of 27 J .26Annex D (informative) Notes on hydrogen content 29 ISO 2015 All rights reserved iiiContents PageBS EN ISO 17632:2015ISO 17632:2015(E)ForewordISO (the International

22、 Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been est

23、ablished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardiz

24、ation.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance wi

25、th the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any

26、patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.F

27、or an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for

28、 this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 3, Welding consumables.This second edition cancels and replaces the first edition (ISO 17632:2004), which has been technically revised.Requests for official interpretations of any aspect of this International Standard should

29、be directed to the Secretariat of ISO/TC 44/SC 3, through your national standards body, a complete listing of which can be found at www.iso.org.iv ISO 2015 All rights reservedBS EN ISO 17632:2015ISO 17632:2015(E)IntroductionThis International Standard provides a classification system for tubular cor

30、ed electrodes in terms of tensile properties, impact properties, chemical composition of the all-weld metal, type of electrode core, shielding gas, and welding position. The ratio of yield to tensile strength of weld metal is generally higher than that of the parent metal. Matching weld metal yield

31、strength to parent metal yield strength will not necessarily ensure that the weld metal tensile strength matches that of the parent metal. Where the application requires matching tensile strengths, selection of consumables is made by reference to column 3 of Table 1A or Table 1B.Of note is that the

32、mechanical properties of all-weld metal test specimens used to classify the tubular cored electrodes will vary from those obtained in production joints because of the differences in welding procedure such as electrode size, width of weave, welding position, and parent metal composition.The classific

33、ation in accordance with system A is mainly based on EN 758:1997. The classification in accordance with system B is mainly based upon standards used around the Pacific Rim. ISO 2015 All rights reserved vBS EN ISO 17632:2015BS EN ISO 17632:2015Welding consumables Tubular cored electrodes for gas shie

34、lded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification1 ScopeThis International Standard specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of non-alloy and fine grain steels in the as-welded

35、 condition or in the post-weld heat-treated condition with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One tubular cored electrode can be tested and classified with different shielding gases, if any.This International Standard is a combined specification

36、 providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.1) Paragraphs and tables which carry the suffix letter “A”

37、are applicable only to tubular coredelectrodes classified to the system based upon the yield strength and the average impact energy of47 J of all-weld metal in accordance with this International Standard.2) Paragraphs and tables which carry the suffix letter “B” are applicable only to tubular corede

38、lectrodes classified to the system based upon the tensile strength and the average impact energyof 27 J of all-weld metal in accordance with this International Standard.3) Paragraphs and tables which have neither the suffix letter “A” nor the suffix letter “B” are applicableto all tubular cored elec

39、trodes classified in accordance with this International Standard.It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current, but for the purposes of this International Standard, pulsed current is not permitted for determining the elec

40、trode classification.2 Normative referencesThe following referenced documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the reference

41、d document (including any amendments) applies.ISO 544, Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markingsISO 3690, Welding and allied processes Determination of hydrogen content in arc weld metalISO 6847, Welding con

42、sumables Deposition of a weld metal pad for chemical analysisISO 6947:2011, Welding and allied processes Welding positionsISO 13916, Welding Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperatureISO 14175, Welding consumables Gases and gas mi

43、xtures for fusion welding and allied processesISO 14344, Welding consumables Procurement of filler materials and fluxesISO 15792-1:2000, Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys. Amended by ISO 15792-1:2000/Amd 1:2011I

44、NTERNATIONAL STANDARD ISO 17632:2015(E) ISO 2015 All rights reserved 1BS EN ISO 17632:2015ISO 17632:2015(E)ISO 15792-2:2000, Welding consumables Test methods Part 2: Preparation of single-run and two-run technique test specimens in steelISO 15792-3, Welding consumables Test methods Part 3: Classific

45、ation testing of positional capacity and root penetration of welding consumables in a fillet weldISO 80000-1:2009, Quantities and units Part 1: General. Corrected by ISO 80000-1:2009/Cor 1:20113 ClassificationClassification designations are based upon two approaches to indicate the tensile propertie

46、s and the impact properties of the all-weld metal obtained with a given electrode. The two designation approaches include additional designators for some other classification requirements, but not all as will be clear from the following. In most cases, a given commercial product can be classified in

47、 both systems. Then, either or both classification designations can be used for the product (see Annex A).The classification includes all-weld metal properties obtained with a tubular cored electrode and appropriate shielding gas combination as given below. With the exception of the symbol for weldi

48、ng position which is based on ISO 15792-3, the classification of gas shielded tubular cored electrodes is based on the 1,2 mm electrode size or if this size is not manufactured, the next larger diameter manufactured. The classification of self-shielded tubular cored electrodes is based on the 2,4 mm

49、 diameter or the largest diameter manufactured if less than 2,4 mm.3.1A Classification by yield strength and 47 J impact energy3.1B Classification by tensile strength and 27 J impact energyThe classification is divided into eight parts. The classification is divided into nine parts.1) The first part (T) indicates a tubular coredelectrode.1) The first part (T) indicates a tubular coredelectrode.2) The second part gives a symbol indicatingthe yield strength and elongation of all-weld metal for multi-run technique or t

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1