1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Woodworking machines SafetyPart 6: Single spindle vertical moulding machines (“toupies“)BS EN ISO 190856:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 19085-6 December 2017 ICS 79.120.10 English Version W
2、oodworking machines - Safety - Part 6: Single spindle vertical moulding machines (“toupies“) (ISO 19085-6:2017) Machines bois - Scurit - Partie 6: Toupies monobroches arbre vertical (ISO 19085-6:2017) Holzbearbeitungsmaschinen - Sicherheit - Teil 6: Einspindelige senkrechte Tischfrsmaschinen (ISO 19
3、085-6:2017) This European Standard was approved by CEN on 11 October 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog
4、raphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsib
5、ility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republi
6、c of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE
7、NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19085-6:2017 ENational forewordThis British Standard is the
8、UK implementation of EN ISO 190856:2017. It is identical to ISO 190856:2017. It supersedes BS EN 8481:2007+A2:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines.A list of organizations represented on this committee can b
9、e obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 89300 1ICS 79.120.10; 13.110
10、Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 190856:
11、2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 19085-6 December 2017 ICS 79.120.10 English Version Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines (“toupies“) (ISO 19085-6:2017) Machines bois - Scurit - Partie 6: Toupies monobroches arbre vertical (ISO
12、 19085-6:2017) Holzbearbeitungsmaschinen - Sicherheit - Teil 6: Einspindelige senkrechte Tischfrsmaschinen (ISO 19085-6:2017) This European Standard was approved by CEN on 11 October 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for gi
13、ving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three of
14、ficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies
15、of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Sloveni
16、a, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CEN All rights of exploitation in any form and by any means reserve
17、d worldwide for CEN national Members. Ref. No. EN ISO 19085-6:2017 EBS EN ISO 190856:2017EN ISO 19085-6:2017 (E) 3 European foreword This document (EN ISO 19085-6:2017) has been prepared by Technical Committee ISO/TC 39 “Machine tools” in collaboration with Technical Committee CEN/TC 142 “Woodworkin
18、g machines - Safety” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2018 and conflicting national standards shall be withdrawn at the latest by June
19、2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 848-1:2007+A2:20012. This document has been prepared under a mandat
20、e given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, t
21、he national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv
22、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 19085-6:2017 has been approved by CEN as EN ISO 19085-6:2017 without any modification. BS EN ISO
23、 190856:2017EN ISO 19085-6:2017 (E) 4 Annex ZA (informative) Relationship between this European Standard and the essential requirements of Directive 2006/42/EC This European standard has been prepared under a Commissions standardization request “M/396” to provide one voluntary means of conforming to
24、 essential requirements of the new approach Machinery Directive 2006/42/EC. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this stand
25、ard, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. Table ZA.1 Correspondence between this European Standard and Directive 2006/42/EC Essential Requirements (ERs) of Directive 2006/42/EC Clauses/subclauses of this EN Rema
26、rks/ Notes 1.1.2 Principles of safety integration a) fitted for its function Clauses 5, 6, 7, 8 b) eliminate or reduce the risks, give measures, inform Clause 5, 6, 7, 8 c) intended use and reasonably foreseeable misuse Clause 5, 6, 7, 8 d) constraints in use 7.5, 8.3 e) equipment 6.1, 8.3 1.1.3 Mat
27、erials and products 6.2, 7.3 1.1.4 Lighting 8.3 1.1.5 Design of machinery to facilitate its handling 7.5 1.1.6 Ergonomics 7.5 1.1.7 Operating position 5.2 1.2.1 Safety and reliability of control systems 5.1, 5.6, 5.7, 5.8, 5.11, 5.12, 5.13, 6.3.6, 6.5, 6.6, 7.7, 7.8 1.2.2 Control devices 5.2, 5.3, 5
28、.4, 5.7 1.2.3 Starting 5.3 1.2.4 Stopping 5.4, 5.5, 6.4 1.2.4.1 Normal stop 5.4.2 1.2.4.3 Emergency stop 5.4.4 1.2.5 Selection of control or operating mode 5.6 1.2.6 Failure of the power supply 5.8, 7.7, 7.8 BS EN ISO 190856:2017EN ISO 19085-6:2017 (E) 5 1.3.1 Risk of loss of stability 6.1, 8.3 1.3.
29、2 Risk of break-up during operation 6.2, 8.3 1.3.3 Risks due to falling or ejected objects 6.2, 6.3, 6.5, 6.8, 6.9, 8.3 1.3.4 Risk due to surfaces, edges or angles Not significant, see ISO 12100:2010 1.3.6 Risks relating to variations in the operating conditions 5.7, 6.6 1.3.7 Risks related to movin
30、g parts 6.5, 6.6, 6.7, 8.3 1.3.8 Choice of protection against risks related to moving parts 6.6, 6.7, 6.8 1.3.8.1 Moving transmission parts 6.6.3, 6.6.4 1.3.8.2 Moving parts involved in the process 6.6.2 1.3.9 Risk of uncontrolled movements 6.1.1 1.4.1 General requirements 6.9 1.4.2.1 Fixed guards 6
31、.5.1 1.4.2.2 Interlocking movable guards 6.5.2 1.4.2.3 Adjustable guards restricting access 6.5.2 1.4.3 Special requirements for protective devices 6.5.3, 6.5.6 1.5.1 Electricity supply 7.4, 7.13 1.5.2 Static electricity 7.11 1.5.3 Energy supply other than electricity 7.7, 7.8 1.5.4 Errors of fittin
32、g 7.12 1.5.6 Fire 7.1 1.5.8 Noise 7.2 1.5.11 External radiation 7.9 1.5.12 Laser equipment 7.10 1.5.13 Emission of hazardous materials and substances 7.3 1.6.1 Machinery maintenance 7.14, 8.3 1.6.2 Access to operating position and servicing points 7.14, 8.3 1.6.3 Isolation of energy sources 7.13, 8.
33、3 1.6.4 Operator intervention 7.14, 8.3 1.6.5 Cleaning of internal parts 7.14, 8.3 1.7.1 Information and warnings on the machinery 7.10, 8.1, 8.2 1.7.2 Warning devices 7.10, 8.1 1.7.3 Marking of machinery 8.2 BS EN ISO 190856:2017EN ISO 19085-6:2017 (E) 6 1.7.4 Instructions 7.10, 8.3 2.3 Machinery f
34、or working wood and analogous materials a) guiding 6.10, 6.11 b) ejection 6.2, 6.3, 6.5, 6.6, 6.8, 6.9, 8.3 c) brake 5.5, 6.4 d) accidental tool contact 6.6.2, 8.3 WARNING 1 Presumption of conformity stays valid only as long as a reference to this European standard is maintained in the list publishe
35、d in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. WARNING 2 Other Union legislation may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 190856
36、:2017This page deliberately left blank ISO 19085-6:2017(E)Foreword viIntroduction vii1 Scope . 12 Normative references 23 Terms and definitions . 24 List of significant hazards . 85 Safety requirements and measures for controls 105.1 Safety and reliability of control systems 105.2 Control devices 10
37、5.3 Start . 115.4 Safe stops 115.4.1 General. 115.4.2 Normal stop . 115.4.3 Operational stop 115.4.4 Emergency stop .115.5 Braking function of tool spindles . 125.6 Mode selection . 125.7 Spindle speed changing 125.7.1 Spindle speed changing by changing belts on the pulleys 125.7.2 Spindle speed cha
38、nging by incremental speed change motor 125.7.3 Infinitely variable speed by frequency inverter .125.7.4 Spindle speed limiting device for tenoning .125.7.5 Changing of the direction of spindle rotation 125.8 Failure of any power supply . 135.9 Manual reset control . 135.10 Enabling control 135.11 M
39、achine moving parts speed monitoring . 135.12 Time delay 145.13 Power driven adjustment of arbor, demountable power feed unit, fences and table insert . 146 Safety requirements and measures for protection against mechanical hazards .146.1 Stability . 146.1.1 Stationary machines 146.1.2 Displaceable
40、machines 146.2 Risk of break-up during operation 156.3 Tool holder and tool design. 156.3.1 General. 156.3.2 Spindle locking .176.3.3 Circular saw blade fixing device 186.3.4 Flange dimension for circular saw blades 186.3.5 Arbor rings .186.3.6 Quick tool/arbor change system . 186.3.7 Manual adjustm
41、ent of arbor height 186.3.8 Manual adjustment of arbor inclination .196.4 Braking 196.4.1 Braking of tool spindles 196.4.2 Maximum run-down time . 196.4.3 Brake release 206.5 Safeguards 206.5.1 Fixed guards 206.5.2 Interlocking movable guards 206.5.3 Hold-to-run control 20 ISO 2017 All rights reserv
42、ed iiiContents PageISO 19085-6:2017(E)Foreword viIntroduction vii1 Scope . 12 Normative references 23 Terms and definitions . 24 List of significant hazards . 85 Safety requirements and measures for controls 105.1 Safety and reliability of control systems 105.2 Control devices 105.3 Start . 115.4 Sa
43、fe stops 115.4.1 General. 115.4.2 Normal stop . 115.4.3 Operational stop 115.4.4 Emergency stop .115.5 Braking function of tool spindles . 125.6 Mode selection . 125.7 Spindle speed changing 125.7.1 Spindle speed changing by changing belts on the pulleys 125.7.2 Spindle speed changing by incremental
44、 speed change motor 125.7.3 Infinitely variable speed by frequency inverter .125.7.4 Spindle speed limiting device for tenoning .125.7.5 Changing of the direction of spindle rotation 125.8 Failure of any power supply . 135.9 Manual reset control . 135.10 Enabling control 135.11 Machine moving parts
45、speed monitoring . 135.12 Time delay 145.13 Power driven adjustment of arbor, demountable power feed unit, fences and table insert . 146 Safety requirements and measures for protection against mechanical hazards .146.1 Stability . 146.1.1 Stationary machines 146.1.2 Displaceable machines 146.2 Risk
46、of break-up during operation 156.3 Tool holder and tool design. 156.3.1 General. 156.3.2 Spindle locking .176.3.3 Circular saw blade fixing device 186.3.4 Flange dimension for circular saw blades 186.3.5 Arbor rings .186.3.6 Quick tool/arbor change system . 186.3.7 Manual adjustment of arbor height
47、186.3.8 Manual adjustment of arbor inclination .196.4 Braking 196.4.1 Braking of tool spindles 196.4.2 Maximum run-down time . 196.4.3 Brake release 206.5 Safeguards 206.5.1 Fixed guards 206.5.2 Interlocking movable guards 206.5.3 Hold-to-run control 20 ISO 2017 All rights reserved iiiContents PageB
48、S EN ISO 190856:2017ISO 19085-6:2017(E)6.5.4 Two-hand control .206.5.5 Electro-sensitive protective equipment (ESPE) .206.5.6 Pressure-sensitive protective equipment (PSPE).206.6 Prevention of access to moving parts . 206.6.1 General. 206.6.2 Guarding of tools .206.6.3 Guarding of drives .246.6.4 Gu
49、arding of shearing and/or crushing zones 246.7 Impact hazard . 246.8 Clamping devices . 246.9 Measures against ejection 256.9.1 General. 256.9.2 Guards materials and characteristics256.9.3 Anti-kickback devices .256.10 Work-piece supports and guides 276.10.1 Table 276.10.2 Work-piece guiding for straight work 306.10.3 Work-piece guiding for curved work .306.11 Safety appliances 317 Safety requirements and measures for protection against other hazards .327.1 Fire 327.2 Noise . 327.2.1
