1、BSI Standards PublicationBS EN ISO 19932-1:2013Equipment for crop protection Knapsack sprayersPart 1: Safety and environmentalrequirements (ISO 19932-1:2013)BS EN ISO 19932-1:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 19932-1:2013. Together with BS
2、 EN ISO 19932-2:2013, it supersedes BS ISO 19932-1:2006 and BS ISO 19932-2:2006 which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee AGE/15, Equipment for crop protection and application of liquid fertilizer.A list of organizations represented on this comm
3、ittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 71828 1ICS 65.060
4、.40 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE
5、 EUROPISCHE NORM EN ISO 19932-1 June 2013 ICS 65.060.40 English Version Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013) Matriel de protection des cultures - Pulvrisateurs dos - Partie 1: Exigences environnementales et de scurit (IS
6、O 19932-1:2013) Pflanzenschutzgerte - Tragbare Gerte - Teil 1: Sicherheitstechnische und umweltrelevante Anforderungen (ISO 19932-1:2013) This European Standard was approved by CEN on 8 May 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions
7、 for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in t
8、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards
9、bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia
10、, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for C
11、EN national Members. Ref. No. EN ISO 19932-1:2013: EBS EN ISO 19932-1:2013EN ISO 19932-1:2013 (E) 3 Foreword This document (EN ISO 19932-1:2013) has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry“ in collaboration with Technical Committee CEN/TC 1
12、44 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2013, and conflicting national standard
13、s shall be withdrawn at the latest by December 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared u
14、nder a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal R
15、egulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland
16、, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 19932-1:2013 has been approved by CEN as EN ISO 19932-1:2013 without any modification. BS E
17、N ISO 19932-1:2013EN ISO 19932-1:2013 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC on machinery and Directive 2009/127/EC amending Directive 2006/42/EC with regard to machinery for pesticide application This Europe
18、an Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery and Directive 2009/127/EC amending Directive 2006/42/EC with
19、regard to machinery for pesticide application. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limit
20、s of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of Directives 2006/42/EC and 2009/127/EC and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this stan
21、dard. BS EN ISO 19932-1:2013ISO 19932-1:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 General requirements . 24.1 General . 24.2 Harness 44.3 Spray tank 44.4 Controls . 54.5 Hoses . 64.6 Filters 64.7 Spra
22、y lance and nozzles 65 Specific requirements for lever-operated knapsack sprayers 75.1 General . 75.2 Spray tank 76 Specific requirements for engine- or motor-driven knapsack sprayers 86.1 General . 86.2 Spray tank 86.3 Controls . 86.4 Power-driven components . 96.5 Fuel tank . 96.6 Hot parts . 96.7
23、 Exhaust system 106.8 Parts under high voltage 106.9 Electromagnetic immunity 106.10 Noise . 106.11 Vibration 107 Specific requirements for compression sprayers .117.1 General 117.2 Harness . 117.3 Spray tank . 118 Information for use .128.1 Instruction handbook 128.2 Marking 148.3 Warnings . 15Anne
24、x A (informative) List of significant hazards16Bibliography .17BS EN ISO 19932-1:2013ISO 19932-1:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normal
25、ly carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the
26、 work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the d
27、ifferent approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the elements of this document may b
28、e the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patentsAny t
29、rade name used in this document is information given for the convenience of users and does not constitute an endorsement.The committee responsible for this document is ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 6, Equipment for crop protection.This second edition
30、 of ISO 19932-1, together with ISO 19932-2, cancels and replaces ISO 19932-1:2006 and ISO 19932-2:2006.ISO 19932 consists of the following parts, under the general title Equipment for crop protection Knapsack sprayers: Part 1: Safety and environmental requirements Part 2: Test methodsiv ISO 2013 All
31、 rights reservedBS EN ISO 19932-1:2013ISO 19932-1:2013(E)IntroductionThe application of plant protection products with knapsack sprayers should take into consideration biological, economic, environmental and operator issues.The aim of this part of ISO 19932 is to specify safety and environmental req
32、uirements for equipment.Implementation of this part of ISO 19932 should achieve an appropriate level of operator safety and avoid unnecessary dispersal of plant protection products into the environment. This document is a type-C standard as stated in ISO 12100. The machinery concerned and the extent
33、 to which hazards, hazardous situations or hazardous events are covered are indicated in the scope of this document.When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the req
34、uirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard. ISO 2013 All rights reserved vBS EN ISO 19932-1:2013BS EN ISO 19932-1:2013Equipment for crop protection Knapsack sprayers Part 1: Safety and environmental requiremen
35、ts1 ScopeThis part of ISO 19932 specifies the safety and environmental requirements and their means of verification for the design and construction of knapsack sprayers carried on the back or shoulder of the operator for use with plant protection products. In addition, it specifies the type of infor
36、mation on safe working practices (including residual risks) to be provided by the manufacturer.It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic pressure atomisation of the spray liquid, wit
37、h a nominal volume of more than 3 l, for their intended use primarily in agriculture and horticulture.It does not apply to knapsack mistblowers according to ISO 28139.This part of ISO 19932 deals with all significant hazards, hazardous situations and hazardous events relevant to knapsack sprayers wh
38、en they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A), excepting the hazards arising from: static electricity; explosion or fire from chemicals for spraying; and insufficient structural integrity.This document is not applicable
39、 to knapsack sprayers which are manufactured before the date of publication of this document.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies
40、. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1401:1999, Rubber hoses for agricultural sprayingISO 3767-5:1992, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other
41、 displays Part 5: Symbols for manual portable forestry machineryISO 3864-1:2011, Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markingsISO 5681:1992, Equipment for crop protection VocabularyISO 5682-1:1996, Equipment for crop protection Spray
42、ing equipment Part 1: Test methods for sprayer nozzlesISO 6385:2004, Ergonomic principles in the design of work systemsISO 8169:1984, Equipment for crop protection Sprayers Connecting dimensions for nozzles and manometersISO 8893:1997, Forestry machinery Portable brush-cutters and grass-trimmers Eng
43、ine performance and fuel consumptionINTERNATIONAL STANDARD ISO 19932-1:2013(E) ISO 2013 All rights reserved 1BS EN ISO 19932-1:2013ISO 19932-1:2013(E)ISO 10626:1991, Equipment for crop protection Sprayers Connecting dimensions for nozzles with bayonet fixingISO 11684:1995, Tractors, machinery for ag
44、riculture and forestry, powered lawn and garden equipment Safety signs and hazard pictorials General principlesISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reductionISO 13732-1:2006, Ergonomics of the thermal environment Methods for the assessment of hum
45、an responses to contact with surfaces Part 1: Hot surfacesISO 13857:2008, Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbsISO 14982:1998, Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteriaISO 19732
46、:2007, Equipment for crop protection Sprayer filters Colour coding for identificationISO 19932-2:2013, Equipment for crop protection Knapsack sprayers Part 2: Test methodsISO 22868:2011, Forestry and gardening machinery Noise test code for portable hand-held machines with internal combustion engine
47、Engineering method (Grade 2 accuracy)ISO 29664:2010, Plastics Artificial weathering including acidic deposition3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 5681 and ISO 12100 and the following apply.3.1knapsack sprayerself-contained sprayer carried
48、 on the operators back or shoulder by means of straps or a strap3.2nominal volumevolume indicated by the maximum filling level marked on the spray tankNote 1 to entry: The maximum filling level can be marked by the upper value of the contents gauge scale or at a lower level by a dedicated mark.3.3ma
49、ximum working pressuremaximum pressure allowed at any part of the sprayer4 General requirements4.1 General4.1.1 The sprayer shall comply with the safety and environmental requirements and/or protective measures of this Clause, as well as the additional requirements for particular types of knapsack specified in Clauses 5, 6, and 7.In addition, the sprayer shall be designed according to the principles of ISO 6385 and ISO 12100 for relevant but not significant hazards which are not dealt wi
