1、Energy performance of buildings Indicators, requirements, ratings and certificatesPart 1: General aspects and application to the overall energy performanceBS EN ISO 52003-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISC
2、HE NORM EN ISO 52003-1 July 2017 ICS 91.120.10 Supersedes EN 15217:2007English Version Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 1: General aspects and application to the overall energy performance (ISO 52003-1:2017) Performance nergtique des btiment
3、s - Indicateurs, exigences, apprciations et certificats - Partie 1: Aspects gnraux et application la performance nergtique globale (ISO 52003-1:2017) Energieeffizienz von Gebuden - Indikatoren, Anforderungen, Kennwerte und Ausweise - Teil 1: Allgemeine Aspekte und Anwendung auf die Gesamtenergieeffi
4、zienz (ISO 52003-1:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lis
5、ts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under
6、 the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yu
7、goslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COM
8、IT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 52003-1:2017 ENational forewordThis British Standa
9、rd is the UK implementation of EN ISO 52003-1:2017. It supersedes BS EN 15217:2017 and BS ISO 16343:2013, which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540/8, Mirror committee for ISO/TC 163 - Thermal Performance and Energy use in the built Enviro
10、nment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI
11、Standards Limited 2017ISBN 978 0 580 89333 9ICS 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issued since public
12、ationDate Text affectedBRITISH STANDARDBS EN ISO 52003-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 52003-1 July 2017 ICS 91.120.10 Supersedes EN 15217:2007English Version Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 1: General aspects
13、 and application to the overall energy performance (ISO 52003-1:2017) Performance nergtique des btiments - Indicateurs, exigences, apprciations et certificats - Partie 1: Aspects gnraux et application la performance nergtique globale (ISO 52003-1:2017) Energieeffizienz von Gebuden - Indikatoren, Anf
14、orderungen, Kennwerte und Ausweise - Teil 1: Allgemeine Aspekte und Anwendung auf die Gesamtenergieeffizienz (ISO 52003-1:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
15、 giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three
16、 official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodi
17、es of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slov
18、enia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved
19、 worldwide for CEN national Members. Ref. No. EN ISO 52003-1:2017 EBS EN ISO 52003-1:2017EN ISO 52003-1:2017 (E) 2 European foreword This document (EN ISO 52003-1:2017) has been prepared by Technical Committee ISO/TC 163 “Thermal performance and energy use in the built environment“ in collaboration
20、with Technical Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2018
21、and conflicting national standards shall be withdrawn at the latest by January 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document ha
22、s been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document is part of the set of standards on the energy performance of buildings (the set of EPB standards) and has been prepared under a mandate given to CEN by the European Commissi
23、on and the European Free Trade Association (Mandate M/480, see reference EF1 below), and supports essential requirements of EU Directive 2010/31/EC on the energy performance of buildings (EPBD, EF2). In case this standard is used in the context of national or regional legal requirements, mandatory c
24、hoices may be given at national or regional level for such specific applications, in particular for the application within the context of EU Directives transposed into national legal requirements. Further target groups are users of the voluntary common European Union certification scheme for the ene
25、rgy performance of non-residential buildings (EPBD art.11.9) and any other regional (e.g. Pan European) parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock. This document supersedes EN 15217:2007 EF3 that was developed during th
26、e first EPBD mandate (M/343 According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republ
27、ic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. References: EF1 Mandate M/480, Mandate to CEN, CENE
28、LEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance of buildings (2010/31/EU
29、) of 14th December 2010 EF2 EPBD, Recast of the Directive on the energy performance of buildings (2010/31/EU) of 14th December 2010 BS EN ISO 52003-1:2017EN ISO 52003-1:2017 (E) 3 EF3 EN 15217:2007, Energy performance of buildings Methods for expressing energy performance and for energy certificatio
30、n of buildings Endorsement notice The text of ISO 52003-1:2017 has been approved by CEN as EN ISO 52003-1:2017 without any modification. BS EN ISO 52003-1:2017This page deliberately left blank ISO 52003-1:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 14
31、 Symbols and subscripts . 84.1 Symbols . 84.2 Subscripts 85 Description of the document . 95.1 Brief overview of the document . 95.2 Selection criteria between the possible options 95.3 Input and output data of new calculation methodologies . 95.3.1 General 95.3.2 Input data . 95.3.3 Output data 106
32、 Relation between EPB features, indicators, requirements, ratings and certificates 107 Energy performance features and their indicators 117.1 General 117.2 Normalization to building size . 127.3 Energy performances and their indicators 127.3.1 Overall energy performances. 127.3.2 Partial energy perf
33、ormances 127.4 Ratios of identical/similar quantities as indicators for energy performances .138 Tailoring for requirements and for ratings .148.1 Two approaches 148.2 Project characteristics for tailoring . 159 Energy performance requirements .159.1 General 159.2 Choice of the mix of requirements 1
34、69.3 Constant or variable value requirements . 179.4 Actual strictness 179.5 Reporting template for the overall energy performance .1710 EPB rating .1810.1 General 1810.2 EPB rating procedures . 1810.3 Reference values . 1910.3.1 General. 1910.3.2 Requirement as main reference value 1910.3.3 Buildin
35、g stock as reference 2011 Energy performance certificate .2011.1 General 2011.2 Content of the procedure for a building energy certificate .2011.3 Content of the energy performance certificate 2211.3.1 General. 2211.3.2 Default graphical representation model 2211.4 Recommendations 2312 Quality contr
36、ol .2313 Compliance check .23 ISO 2017 All rights reserved iiiContents PageISO 52003-1:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 14 Symbols and subscripts . 84.1 Symbols . 84.2 Subscripts 85 Description of the document . 95.1 Brief overview of the d
37、ocument . 95.2 Selection criteria between the possible options 95.3 Input and output data of new calculation methodologies . 95.3.1 General 95.3.2 Input data . 95.3.3 Output data 106 Relation between EPB features, indicators, requirements, ratings and certificates 107 Energy performance features and
38、 their indicators 117.1 General 117.2 Normalization to building size . 127.3 Energy performances and their indicators 127.3.1 Overall energy performances. 127.3.2 Partial energy performances 127.4 Ratios of identical/similar quantities as indicators for energy performances .138 Tailoring for require
39、ments and for ratings .148.1 Two approaches 148.2 Project characteristics for tailoring . 159 Energy performance requirements .159.1 General 159.2 Choice of the mix of requirements 169.3 Constant or variable value requirements . 179.4 Actual strictness 179.5 Reporting template for the overall energy
40、 performance .1710 EPB rating .1810.1 General 1810.2 EPB rating procedures . 1810.3 Reference values . 1910.3.1 General. 1910.3.2 Requirement as main reference value 1910.3.3 Building stock as reference 2011 Energy performance certificate .2011.1 General 2011.2 Content of the procedure for a buildin
41、g energy certificate .2011.3 Content of the energy performance certificate 2211.3.1 General. 2211.3.2 Default graphical representation model 2211.4 Recommendations 2312 Quality control .2313 Compliance check .23 ISO 2017 All rights reserved iiiContents PageBS EN ISO 52003-1:2017ISO 52003-1:2017(E)An
42、nex A (normative) Input and method selection data sheet Template 24Annex B (informative) Input and method selection data sheet Default choices 29Bibliography .35iv ISO 2017 All rights reservedBS EN ISO 52003-1:2017ISO 52003-1:2017(E)Annex A (normative) Input and method selection data sheet Template
43、24Annex B (informative) Input and method selection data sheet Default choices 29Bibliography .35iv ISO 2017 All rights reserved ISO 52003-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of
44、preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental,
45、 in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/
46、IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibil
47、ity that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of pa
48、tent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to
49、conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.ISO 52003-1 was prepared by ISO Technical Committee TC 163, Thermal performance and energy use in the built environment, in collaboration with Technical Committee TC 205, Building environment design, and with the European Committee for Standardization (CEN) Technical Committee CEN/TC 89, Thermal performa
