1、BRITISH STANDARD BS EN ISO/IEC 17050-2:2004 Conformity assessment Suppliers declaration of conformity Part 2: Supporting documentation The European Standard EN ISO/IEC 17050-2:2004 has the status of a British Standard ICS 03.120.20 BS EN ISO/IEC 17050-2:2004 This British Standard was published under
2、 the authority of the Standards Policy and Strategy Committee on 26 October 2004 BSI 26 October 2004 ISBN 0 580 44684 0 National foreword This British Standard is the official English language version of EN ISO/IEC 17050-2:2004. It is identical with ISO/IEC 17050-2:2004. It together with BS EN ISO/I
3、EC 17050-1:2004, supersdes BS EN 45014:1998 which is withdrawn. NOTE The first edition of ISO/IEC 17050-2, together with ISO/IEC 17050-1, cancels and replaces the second edition of ISO/IEC Guide 22:1996, General Criteria for suppliers declaration of conformity. BS EN ISO/IEC 17050:2004 consists of t
4、he following parts, under the general title Conformity assessment Suppliers declaration of conformity: Part 1: General requirements; Part 2: Supporting documentation. The UK participation in its preparation was entrusted to Technical Committee QS/3, Conformity assessment procedures, which has the re
5、sponsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled
6、“International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance wit
7、h a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related internat
8、ional and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO/IEC title page, the EN ISO/IEC foreword page, the ISO/IEC title page, pages ii to iv, pages 1 and 2, an inside back cover and a back cover. The BSI
9、 copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO/IEC 17050-2 October 2004 ICS 03.120.20 Supersedes EN 45014:1998 English version Conformity ass
10、essment - Suppliers declaration of conformity - Part 2: Supporting documentation (ISO/IEC 17050-2:2004) Evaluation de la conformit - Dclaration de conformit du fournisseur - Partie 2: Documentation dappui (ISO/IEC 17050-2:2004) Konformittsbewertung - Konformittserklrung von Anbeitern - Teil 2: Unter
11、sttzende Dokumentation (ISO/IEC 17050-2:2004) This European Standard was approved by CEN and CENELEC on 30 September 2004. CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national s
12、tandard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN or CENELEC member. This European Standard exists in three official versions (English, French, German). A versio
13、n in any other language made by translation under the responsibility of a CEN or CENELEC member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN and CENELEC members are the national standards bodies and national electrotechnical commit
14、tees, respectively, of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. CEN M
15、anagement Centre: CENELEC Central Secretariat: rue de Stassart, 36 B-1050 Brussels rue de Stassart, 35 B-1050 Brussels 2004 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN ISO/IEC 17050-2:2004 E Fore
16、word This document (EN ISO/IEC 17050-2:2004) has been prepared by Technical Committee ISO/CASCO “Committee on conformity assessment“ in collaboration with Technical Committee CEN/CLC/TC 1 “Criteria for conformity assessment bodies“, the secretariat of which is held by SN. This European Standard shal
17、l be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This document supersedes EN 45014:1998. According to the CEN/CENELEC Internal Re
18、gulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
19、 Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO/IEC 17050-2:2004 has been approved by CEN and CENELEC as EN ISO/IEC 17050-2:2004 without any modifications. ENISO/IEC170502:2004 Reference number ISO/IEC 17050-2:2004(E)IN
20、TERNATIONAL STANDARD ISO/IEC 17050-2 First edition 2004-10-01 Conformity assessment Suppliers declaration of conformity Part 2: Supporting documentation valuation de la conformit Dclaration de conformit du fournisseur Partie 2: Documentation dappui ENISO/IEC170502:2004DPlcsid Fremia ihTs PDF file my
21、a ctnoian emdebt dedyfepcaes. In ccacnadrow eitA hebods licnesilop gnic,y tihs file mirp eb yatnde iv roweb detu slahl ton ide ebtlnu deess teh typfecaes wihce era hml era deddebicsnede ti dna onstlalde t noeh comuptfrep reromign tide ehtin.g In wodlnidaot gnihs fil,e trapise atpecc tiereht nser ehn
22、opsiiblity fo nto ifnriigngn Aebods licnesilop gnic.y ehT ISO tneClar Secrteirata caceptl on siibality in this .aera Ai ebods a tedarmfo kra Aebod SystemI snctaropro.de teDials fo teh sfotwcudorp erats sut deo crtaee tihs PDF file cna f ebi dnuon tlareneG eh Ifnler oatit evt oeh file; tP ehDc-Frtaei
23、no marapterew stpo ereimizde fro irptni.gn Evyre cera neeb sah takne tsne oeru taht teh file is siutlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem lertait gno it is f,dnuo plsaee ifnrom ttneC ehlar Secterirata ta teh serddaig sleb nevwo. ii ENISO/IEC170502:2004 iiiForeword I
24、SO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical commit
25、tees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the wo
26、rk. In the field of conformity assessment, the ISO Committee on conformity assessment (CASCO) is responsible for the development of International Standards and Guides. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. Draft International Standa
27、rds are circulated to the national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not
28、 be held responsible for identifying any or all such patent rights. ISO/IEC 17050-2 was prepared by the ISO Committee on conformity assessment (CASCO). It was circulated for voting to the national bodies of both ISO and IEC, and was approved by both organizations. This first edition of ISO/IEC 17050
29、-2, together with ISO/IEC 17050-1, cancels and replaces the second edition of ISO/IEC Guide 22:1996, General criteria for suppliers declaration of conformity. ISO/IEC 17050 consists of the following parts, under the general title Conformity assessment Suppliers declaration of conformity: Part 1: Gen
30、eral requirements Part 2: Supporting documentation ENISO/IEC170502:2004ivIntroduction A suppliers declaration of conformity is a form of attestation of conformity to meet demands from the market and regulators for confidence. The acceptance of a suppliers declaration of conformity could be enhanced
31、by retaining documented information on which the supplier bases the declaration and making this documentation available upon request. This part of ISO/IEC 17050 specifies requirements for the documentation to support a suppliers declaration of conformity. Besides enhancing confidence in the supplier
32、s declaration of conformity, such documentation may assist relevant authorities in their surveillance activities. Conformity of a product (including service), process, management system, person or body to specified requirements, which can include normative documents such as standards, guides, technical specifications, laws and regulations, may need to be rigorously substantiated under the responsibility of the supplier, irrespective of the industry sector involved. ENISO/IEC170502:2004
