1、DRAFT FOR DEVELOPMENTDD CEN ISO/TS 24530-3:2006Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 3: tpeg-rtmMLICS 35.240.60; 03.220.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g
2、49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58DD CEN ISO/TS 24530-3:2006This Draft for Development was published under the authority of the Standards Policy and Strategy Committee on 31 May 2006 BSI 2006ISBN 0 580 47129 2National forewordT
3、his Draft for Development is the official English language version of CEN ISO/TS 24530-3:2006.This publication is not to be regarded as a British Standard.It is being issued in the Draft for Development series of publications and is of a provisional nature because technology in this area is rapidly
4、evolving. It should be applied on this provisional basis, so that information and experience of its practical application may be obtained.Comments arising from the use of this Draft for Development are requested so that UK experience can be reported to the European organization responsible for its c
5、onversion to a European standard. A review of this publication will be initiated 2 years after its publication by the European organization so that a decision can be taken on its status at the end of its 3-year life. Notification of the start of the review period will be made in an announcement in t
6、he appropriate issue of Update Standards.According to the replies received by the end of the review period, the responsible BSI Committee will decide whether to support the conversion into a European standard, to extend the life of the Technical Specification or to withdraw it. Comments should be se
7、nt in writing to the Secretary of BSI Technical Committee EPL/278, Road transport informatics, at British Standards House, 389 Chiswick High Road, London W4 4AL, giving the document reference and clause number and proposing, where possible, an appropriate revision of the text.A list of organizations
8、 represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence In
9、dex”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.Summary of pagesThis document comprises a front cover, an inside front cover, the CEN ISO/TS title page, the CEN ISO/TS foreword page, the ISO/TS title page, pages ii to v, a blank page, pages 1 to
10、 58, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsTECHNICAL SPECIFICATIONSPCIFICATION TECHNIQUETECHNISCHE SPEZIFIKATIONCEN ISO/TS 24530-3April 2006ICS 35.
11、240.60; 03.220.20English VersionTraffic and Travel Information (TTI) - TTI via Transport ProtocolExperts Group (TPEG) Extensible Markup Language (XML) -Part 3: tpeg-rtmML (ISO/TS 24530-3:2006)Informations sur le trafic et le tourisme (TTI) - MessagesTTI via le langage de balisage extensible (XML) du
12、 groupedexperts du protocole de transport (TPEG) - Partie 3: tpeg-rtmML (ISO/TS 24530-3:2006)Reise- und verkehrsinformation (TTI) - TTI berDatenstrme der Transportprotokoll Expertengruppe(TPEG) Erweiterbare Auszeichnungssprache (XML) - Teil3: tpeg-rtmML (ISO/TS 24530-3:2006)This Technical Specificat
13、ion (CEN/TS) was approved by CEN on 5 March 2005 for provisional application.The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit theircomments, particularly on the question whether the CEN/TS can be converted into
14、a European Standard.CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS availablepromptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)until the
15、 final decision about the possible conversion of the CEN/TS into an EN is reached.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Neth
16、erlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in
17、 any form and by any means reservedworldwide for CEN national Members.Ref. No. CEN ISO/TS 24530-3:2006: EForeword This document (CEN ISO/TS 24530-3:2006) has been prepared by Technical Committee CEN/TC 278 “Road transport and traffic telematics“, the secretariat of which is held by NEN, in collabora
18、tion with Technical Committee ISO/TC 204 “Transport information and control systems“. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this CEN Technical Specification: Austria, Belgium, Cyprus, Czech Republic, D
19、enmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. CEN ISO/TS 24530-3:2006Reference numberISO/TS 24530-3:2006(E)T
20、ECHNICAL SPECIFICATION ISO/TS24530-3First edition2006-04-15Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 3: tpeg-rtmML Informations sur le trafic et le tourisme (TTI) Messages TTI via le langage de balisage extensible (XML)
21、 du groupe dexperts du protocole de transport (TPEG) Partie 3: tpeg-rtmML CEN ISO/TS 24530-3:2006ii iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 1 3 Abbreviated terms 2 4 Format of this document 3 4.1 Tables. 3 4.2 Example XML. 3 5 tpeg-rtmML 6 5.1 road_traffic_me
22、ssage. 6 5.2 repetitive_time. 6 5.3 non_repetitive_time 7 5.4 accident . 7 5.5 obstructions 16 5.6 activities. 17 5.7 road_conditions 19 5.8 network_performance 21 5.9 network_conditions 23 5.10 facilities_performance 26 5.11 moving_hazards 28 5.12 security_alert. 29 5.13 public_transport_info. 29 5
23、.14 visibility 30 5.15 weather 31 5.16 diversion_advice. 32 Annex A (normative) DTD for tpeg-rtmML TPEG Road Traffic Message application (tpeg-rtmML.dtd) . 35 Annex B (normative) External entity references for tpeg-rtmML TPEG Road Traffic Message application (tpeg-rtmML.ent) . 41 CEN ISO/TS 24530-3:
24、2006iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for wh
25、ich a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
26、matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are ci
27、rculated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In other circumstances, particularly when there is an urgent market requirement for such documents, a technical committee may decide to publish o
28、ther types of normative document: an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in an ISO working group and is accepted for publication if it is approved by more than 50 % of the members of the parent committee casting a vote; an ISO Technical Sp
29、ecification (ISO/TS) represents an agreement between the members of a technical committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting a vote. An ISO/PAS or ISO/TS is reviewed after three years with a view to deciding whether it should be confirmed
30、 for a further three years, revised to become an International Standard, or withdrawn. In the case of a confirmed ISO/PAS or ISO/TS, it is reviewed again after six years at which time it has to be either transposed into an International Standard or withdrawn. Attention is drawn to the possibility th
31、at some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO/TS 24530-3 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical Committee ISO/TC 204, Intelli
32、gent transport systems, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). Throughout the text of this document, read “.this European pre-Standard.” to mean “.this Technical Specification.”. ISO/TS 24530 consists of the following parts, under the genera
33、l title Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML): Part 1: Introduction, common data types and tpegML Part 2: tpeg-locML Part 3: tpeg-rtmML Part 4: tpeg-ptiML CEN ISO/TS 24530-3:2006vIntroduction TPEG in XML (tpegML) provide
34、s the solution to diverse requirements for the ultimate delivery of TPEG applications (potentially simultaneously) via for example ARIB, ATSC, DAB, DVB and the Internet. This will solve the minimal adaptation layers requirement and without doubling up on message carousels, which are handled at diffe
35、rent layers of the protocol stacks. The original TPEG technology uses a byte-oriented stream format, which may be carried on almost any digital bearer with an appropriate adaptation layer. TPEG messages are delivered from service providers to end-users, and are used to transfer application data from
36、 the database of a service provider to an end-users equipment. TPEG binary was initially designed to meet a particular brief, from the EBUs Broadcast Management Committee; to develop a new protocol for Traffic and Travel Information, for use in the multimedia broadcasting environment. TPEG applicati
37、ons were developed with service and transport features, which enable travel-related messages to be coded, decoded, filtered and understood both by humans (visually and/or audibly) and by agent systems. This brief was also endorsed by the EBU TTI Broadcast Strategy Team, who recognized the vital impo
38、rtance of a bearer independent TTI protocol. The development of TPEG binary technology is excellently matched both technically and economically to DAB and possibly to internet bearers, where of the order of up to 10 kbits/s is considered acceptable. However other bearers such as ARIB, ATSC and DVB m
39、ay be able to offer much higher data rates with economic and technical utility. Nevertheless these bearers are highly structured (layered) in their ability to handle transparent data services and they include mechanisms suitable for carousel delivery, which would require a considerably different TPE
40、G data structure before real transparency could be achieved. Another potential use of tpegML is provided to Service Providers who would have a standardised message generation interface, yet be able to develop systems suited to their own requirements. This will enable Service Providers to exchange pr
41、e-edited information regardless of their message generation systems and be substantially language independent. tpegML has been developed using the DTD approach, which allows the use of different language entity files to easily provide a truly language independent service. This approach has the advan
42、tage that tpegML files can be rendered in any language, provided the language entity file is available to the internet browser. This document provides English language entity files only. For other languages the entity files in this document only require direct translation. The development of this IS
43、O/TS 24530 series was undertaken jointly with European Broadcasting Union B/TPEG Group, which has evolved into the TPEG Forum Standards Task Force. Attention is drawn to the EBU sponsored TPEG Forum development principles, which require all inputs containing IPR to be declared during drafting work.
44、No such declarations have been made. CEN ISO/TS 24530-3:2006blank1Traffic and Travel Information (TTI) TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) Part 3: tpeg-rtmML 1 Scope This document establishes the XML encoding of the method of the Road Traffic Message appl
45、ication. The TPEG-RTM Application is intended to convey information to road users. The information provided relates to event and some status information on the road network and on associated infrastructure affecting a road journey. For example, limited information about abnormal operation of links i
46、n the network may be included, such as ferries, lifting-bridges, etc. The TPEG-RTM Application has the broad objective to allow the generation of Traffic and Travel Information (TTI) messages, for delivery to the end-user by one or more bearers. A hierarchical methodology has been developed to allow
47、 the creation of messages from a set of TPEG-RTM tables, which are essentially word-oriented and cover most needs. These TPEG-RTM tables (essentially word-oriented data object dictionaries) comprise a wide ranging ability to describe a TTI event and some status information, introducing new precision
48、 in a number of areas such as “Vehicle types”, “Positional information on the carriageway” and “Diversion routing advice”. It is vital, for further understanding of this document, to have more than a passing understanding of the TPEG-RTM binary specification which describes, among other things, in a
49、 step-by step approach: Message Management, Level One Classes and how they are structured, hierarchically to provide a full Road Traffic Message together with the TPEG Location Referencing system. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/TS 24530-1, Traffic and Travel Information (TTI) TTI via Transport Protocol
