1、 ETSI TS 134 122 V4.8.0 (2003-06)Technical Specification Universal Mobile Telecommunications System (UMTS);Terminal Conformance Specification;Radio Transmission and Reception (TDD)(3GPP TS 34.122 version 4.8.0 Release 4)ETSI ETSI TS 134 122 V4.8.0 (2003-06) 1 3GPP TS 34.122 version 4.8.0 Release 4 R
2、eference RTS/TSGT-0134122v480 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Ind
3、ividual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Docum
4、ent Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the c
5、urrent status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and th
6、e foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being regist
7、ered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 134 122 V4.8.0 (2003-06) 2 3GPP TS 34.122 version 4.8.0 Release 4 Intellectual Property Rights IPRs essential or potentially ess
8、ential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs noti
9、fied to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee ca
10、n be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP
11、). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be foun
12、d under http:/webapp.etsi.org/key/queryform.asp . ETSI ETSI TS 134 122 V4.8.0 (2003-06) 3 3GPP TS 34.122 version 4.8.0 Release 4 Contents Intellectual Property Rights2 Foreword.2 Foreword.19 1 Scope 20 2 References 20 3 Definitions, abbreviations and equations .21 3.1 Definitions21 3.2 Abbreviations
13、 .22 3.3 Equations22 4 Frequency bands and channel arrangement23 4.1 General .23 4.2 Frequency bands.23 4.3 TXRX frequency separation.23 4.3.1 3,84 Mcps TDD Option 23 4.3.2 1,28 Mcps TDD Option 23 4.4 Channel arrangement23 4.4.1 Channel spacing23 4.4.1.1 3,84 Mcps TDD Option.23 4.4.1.2 1,28 Mcps TDD
14、 Option.23 4.4.2 Channel raster .24 4.4.3 Channel number24 4.4.4 UARFCN (3,84 Mcps TDD Option) 24 5 Transmitter Characteristics.24 5.1 General .24 5.2 User Equipment maximum output power.25 5.2.1 Definition and applicability 25 5.2.2 Minimum Requirements .25 5.2.3 Test purpose25 5.2.4 Method of test
15、 .26 5.2.4.1 Initial conditions .26 5.2.4.1.1 3,84 Mcps TDD Option.26 5.2.4.1.2 1,28 Mcps TDD Option.26 5.2.4.2 Procedure 27 5.2.5 Test Requirements 27 5.3 UE frequency stability27 5.3.1 Definition and applicability 27 5.3.2 Minimum Requirements .28 5.3.3 Test purpose28 5.3.4 Method of test .28 5.3.
16、4.1 Initial conditions .28 5.3.4.1.1 3,84 Mcps TDD Option.28 5.3.4.1.2 1,28 Mcps TDD Option.28 5.3.4.2 Procedure 28 5.3.5 Test Requirements 29 5.4 Output Power Dynamics 29 5.4.1 Uplink power control29 5.4.1.1 Initial accuracy (3,84 Mcps TDD Option) 29 5.4.1.1.1 Definition and applicability.29 5.4.1.
17、1.2 Minimum requirements .29 5.4.1.1.3 Test purpose 29 5.4.1.1.4 Method of test29 5.4.1.1.4.1 Initial conditions 29 5.4.1.1.4.2 Procedure .30 ETSI ETSI TS 134 122 V4.8.0 (2003-06) 4 3GPP TS 34.122 version 4.8.0 Release 4 5.4.1.1.5 Test requirements 30 5.4.1.2 Differential accuracy, controlled input
18、(3,84 Mcps TDD Option) 30 5.4.1.2.1 Definition and applicability.30 5.4.1.2.2 Minimum requirements .31 5.4.1.2.3 Test purpose 31 5.4.1.2.4 Method of test31 5.4.1.2.4.1 Initial conditions 31 5.4.1.2.4.2 Procedure .32 5.4.1.2.5 Test requirements 32 5.4.1.2A Differential accuracy, controlled input32 5.
19、4.1.3 Open loop power control (1,28 Mcps TDD Option) .32 5.4.1.3.1 Definition and applicability.32 5.4.1.3.2 Minimum requirements .33 5.4.1.3.3 Test purpose 33 5.4.1.3.4 Method of test33 5.4.1.3.4.1 Initial conditions 33 5.4.1.3.4.2 Procedure .34 5.4.1.3.5 Test requirements 34 5.4.1.4 Closed loop po
20、wer control (1,28 Mcps TDD Option).35 5.4.1.4.1 Definition and applicability.35 5.4.1.4.2 Minimum requirements .35 5.4.1.4.3 Test purpose 35 5.4.1.4.4 Method of test35 5.4.1.4.4.1 Initial conditions 35 5.4.1.4.4.2 Procedure .36 5.4.1.4.5 Test requirements 36 5.4.2 Minimum output power 37 5.4.2.1 Def
21、inition and applicability.37 5.4.2.2 Minimum Requirements37 5.4.2.2.1 3,84Mcps TDD Option37 5.4.2.2.2 1,28Mcps TDD Option37 5.4.2.3 Test purpose 37 5.4.2.4 Method of test .37 5.4.2.4.1 Initial conditions37 5.4.2.4.2 Procedure.38 5.4.2.5 Test requirements38 5.4.2.5.1 3,84 Mcps TDD Option.38 5.4.2.5.2
22、 1,28 Mcps TDD Option.38 5.4.3 Transmit OFF power.38 5.4.3.1 Definition and applicability.38 5.4.3.2 Minimum Requirements38 5.4.3.3 Test purpose 38 5.4.3.4 Method of test .38 5.4.3.5 Test requirements39 5.4.4 Transmit ON/OFF Time mask39 5.4.4.1 Definition and applicability.39 5.4.4.2 Minimum require
23、ments.39 5.4.4.2.1 3,84Mcps TDD Option39 5.4.4.2.2 1,28Mcps TDD Option39 5.4.4.3 Test Purpose40 5.4.4.4 Method of test .40 5.4.4.4.1 Initial conditions40 5.4.4.4.2 Procedure.40 5.4.4.5 Test requirements 40 5.4.5 Out-of-synchronisation handling of output power for continuous transmission.41 5.4.5.1 D
24、efinition and applicability.41 5.4.5.2 Minimum Requirement .41 5.4.5.2.1 3,84 Mcps TDD Option.41 5.4.5.2.2 1,28 Mcps TDD Option.42 5.4.5.3 Test purpose 43 5.4.5.4 Method of test .43 5.4.5.4.2 Procedure.44 ETSI ETSI TS 134 122 V4.8.0 (2003-06) 5 3GPP TS 34.122 version 4.8.0 Release 4 5.4.5.4.2.1 3,84
25、 Mcps TDD Option .44 5.4.5.4.2.2 1,28 Mcps TDD Option .44 5.4.5.5 Test Requirements.44 5.4.6 Out-of-synchronisation handling of output power for discontinuous transmission 45 5.4.6.1 Definition and applicability.45 5.4.6.2 Minimum Requirement .45 5.4.6.2.1 3,84 Mcps TDD Option.45 5.4.6.2.2 1,28 Mcps
26、 TDD Option.46 5.4.6.3 Test purpose 47 5.4.6.4 Method of test .48 5.4.6.4.2 Procedure.48 5.4.6.4.2.1 3,84 Mcps TDD Option .48 5.4.6.4.2.2 1,28 Mcps TDD Option .48 5.4.6.5 Test Requirements.49 5.5 Output RF spectrum emissions.49 5.5.1 Occupied bandwidth .49 5.5.1.1 Definition and applicability.49 5.5
27、.1.2 Minimum Requirements49 5.5.1.2.1 3,84Mcps TDD Option49 5.5.1.2.2 1,28Mcps TDD Option49 5.5.1.3 Test purpose 49 5.5.1.4 Method of test .50 5.5.1.4.1 Initial conditions50 5.5.1.4.2 Procedure.50 5.5.1.5 Test requirements50 5.5.1.5.1 3,84 Mcps TDD Option.50 5.5.1.5.2 1,28 Mcps TDD Option.50 5.5.2 O
28、ut of band emission 50 5.5.2.1 Spectrum emission mask.51 5.5.2.1.1 Definition and applicability.51 5.5.2.1.1.1 3,84 Mcps TDD Option .51 5.5.2.1.1.2 1,28 Mcps TDD Option .51 5.5.2.1.2 Minimum Requirements51 5.5.2.1.2.1 3,84 Mcps TDD Option .51 5.5.2.1.2.2 1,28 Mcps TDD Option .51 5.5.2.1.3 Test purpo
29、se 52 5.5.2.1.4 Method of test52 5.5.2.1.5 Test requirements 53 5.5.2.1.5.1 3,84 Mcps TDD Option .53 5.5.2.1.5.2 1,28 Mcps TDD Option .54 5.5.2.2 Adjacent Channel Leakage power Ratio (ACLR).54 5.5.2.2.1 Definition and applicability.54 5.5.2.2.2 Minimum Requirements54 5.5.2.2.2.1 3,84Mcps TDD Option
30、54 5.5.2.2.2.2 1,28Mcps TDD Option 55 5.5.2.2.3 Test purpose 55 5.5.2.2.4 Method of test55 5.5.2.2.5 Test requirements 55 5.5.2.2.5.1 3,84 Mcps TDD Option .55 5.5.2.2.5.2 1,28 Mcps TDD Option .56 5.5.3 Spurious emissions .56 5.5.3.1 Definition and applicability.56 5.5.3.2 Minimum Requirements56 5.5.
31、3.2.1 3,84 Mcps TDD Option.56 5.5.3.2.2 1,28Mcps TDD Option57 5.5.3.3 Test purpose 57 5.5.3.3.1 3,84 Mcps Option 57 5.5.3.3.2 1,28 Mcps Option 57 5.5.3.4 Method of test .57 5.5.3.4.1 Initial conditions57 5.5.3.4.2 Procedure.58 5.5.3.5 Test requirements58 ETSI ETSI TS 134 122 V4.8.0 (2003-06) 6 3GPP
32、TS 34.122 version 4.8.0 Release 4 5.5.3.5.1 3,84 Mcps TDD Option.58 5.5.3.5.2 1,28 Mcps TDD Option.58 5.6 Transmit Intermodulation.59 5.6.1 Definition and applicability 59 5.6.2 Minimum Requirements .59 5.6.2.1 3,84 Mcps TDD Option.59 5.6.2.2 1,28 Mcps TDD Option.59 5.6.3 Test purpose60 5.6.4 Method
33、 of test .60 5.6.4.1 Initial conditions .60 5.6.4.2 Procedure 60 5.6.4.2.1 3,84 Mcps TDD Option.60 5.6.4.2.2 1,28 Mcps TDD Option.60 5.6.5 Test requirements61 5.6.5.1 3,84 Mcps TDD Option.61 5.6.5.2 1,28 Mcps TDD Option.61 5.7 Transmit Modulation61 5.7.1 Error Vector Magnitude61 5.7.1.1 Definition a
34、nd applicability.61 5.7.1.2 Minimum Requirements61 5.7.1.3 Test purpose 62 5.7.1.4 Method of test .62 5.7.1.4.1 Initial conditions62 5.7.1.4.2 Procedure.62 5.7.1.5 Test requirements62 5.7.2 Peak code domain error 62 5.7.2.1 Definition and applicability.62 5.7.2.2 Minimum Requirement .63 5.7.2.3 Test
35、 purpose 63 5.7.2.4 Method of test .63 5.7.2.4.1 Initial conditions63 5.7.2.4.1.1 3,84 Mcps TDD Option .63 5.7.2.4.1.2 1,28 Mcps TDD Option .63 5.7.2.4.2 Procedure.63 5.7.2.5 Test requirements64 6 Receiver Characteristics.64 6.1 General .64 6.2 Reference sensitivity level64 6.2.1 Definition and appl
36、icability 64 6.2.2 Minimum Requirements .64 6.2.2.1 3,84 Mcps TDD Option.64 6.2.2.2 1,28 Mcps TDD Option.65 6.2.3 Test purpose65 6.2.4 Method of test .65 6.2.4.1 Initial conditions .65 6.2.4.2 Procedure 65 6.2.5 Test requirements66 6.2.5.1 3,84 Mcps TDD Option.66 6.2.5.2 1,28 Mcps TDD Option.66 6.3
37、Maximum Input Level66 6.3.1 Definition and applicability 66 6.3.2 Minimum requirements.66 6.3.2.1 3,84 Mcps TDD Option.66 6.3.2.2 1,28 Mcps TDD Option.67 6.3.3 Test purpose67 6.3.4 Method of test .67 6.3.4.1 Initial conditions .67 6.3.4.2 Procedure 67 6.3.5 Test requirements67 6.4 Adjacent Channel S
38、electivity (ACS)68 6.4.1 Definition and applicability 68 ETSI ETSI TS 134 122 V4.8.0 (2003-06) 7 3GPP TS 34.122 version 4.8.0 Release 4 6.4.2 Minimum Requirements .68 6.4.2.1 3,84 Mcps TDD Option.68 6.4.2.2 1,28 Mcps TDD Option.68 6.4.3 Test purpose69 6.4.4 Method of test .69 6.4.4.1 Initial conditi
39、ons .69 6.4.4.2 Procedure 69 6.4.5 Test Requirements 69 6.4.5.1 3,84 Mcps TDD Option.69 6.4.5.2 1,28 Mcps TDD Option.70 6.5 Blocking Characteristics.70 6.5.1 Definition and applicability 70 6.5.2 Minimum Requirements .70 6.5.2.1 3,84 Mcps TDD Option.70 6.5.2.2 1,28 Mcps TDD Option.71 6.5.3 Test purp
40、ose72 6.5.4 Method of test .72 6.5.4.1 Initial conditions .72 6.5.4.2 Procedure 73 6.5.5 Test requirements73 6.5.5.1 3,84 Mcps TDD Option.73 6.5.5.2 1,28 Mcps TDD Option.74 6.6 Spurious Response .75 6.6.1 Definition and applicability 75 6.6.2 Minimum Requirements .75 6.6.2.1 3,84 Mcps TDD Option.75
41、6.6.2.2 1,28 Mcps TDD Option.75 6.6.3 Test purpose75 6.6.4 Method of test .76 6.6.4.1 Initial conditions .76 6.6.4.2 Procedure 76 6.6.5 Test requirements76 6.6.5.1 3,84 Mcps TDD.76 6.6.5.2 1,28 Mcps TDD.76 6.7 Intermodulation Characteristics77 6.7.1 Definition and applicability 77 6.7.2 Minimum Requ
42、irements .77 6.7.2.1 3,84 Mcps TDD Option.77 6.7.2.2 1,28 Mcps TDD Option.77 6.7.3 Test purpose78 6.7.4 Method of test .78 6.7.4.1 Initial conditions .78 6.7.4.2 Procedure 78 6.7.5 Test requirements79 6.7.5.1 3,84 Mcps TDD Option.79 6.7.5.2 1,28 Mcps TDD Option.79 6.8 Spurious Emissions 79 6.8.1 Def
43、inition and applicability 79 6.8.2 Minimum Requirements .80 6.8.2.1 3,84 Mcps TDD Option.80 6.8.2.2 1,28 Mcps TDD Option.80 6.8.3 Test purpose80 6.8.4 Method of test .80 6.8.4.1 Initial conditions .80 6.8.4.2 Procedure 81 6.8.5 Test requirements81 6.8.5.1 3,84 Mcps TDD Option.81 6.8.5.2 1,28 Mcps TD
44、D Option.82 7 Performance Requirements 83 7.1 General .83 7.1.2 Definition of Additive White Gaussian Noise (AWGN) Interferer 83 ETSI ETSI TS 134 122 V4.8.0 (2003-06) 8 3GPP TS 34.122 version 4.8.0 Release 4 7.2 Demodulation in static propagation conditions 83 7.2.1 Demodulation of DCH83 7.2.1.1 Def
45、inition and applicability.83 7.2.1.2 Minimum requirements.83 7.2.1.2.1 3,84 Mcps TDD Option.83 7.2.1.2.2 1,28 Mcps TDD Option.84 7.2.1.3 Test purpose 84 7.2.1.4 Method of test .85 7.2.1.4.1 Initial conditions85 7.2.1.4.2 Procedure.85 7.2.1.5 Test requirements85 7.3 Demodulation of DCH in multipath f
46、ading conditions 85 7.3.1 Multipath fading Case 185 7.3.1.1 Definition and applicability.85 7.3.1.2 Minimum requirements.85 7.3.1.2.1 3,84 Mcps TDD Option.85 7.3.1.2.2 1,28 Mcps TDD Option.86 7.3.1.3 Test purpose 87 7.3.1.4 Method of test .87 7.3.1.4.1 Initial conditions87 7.3.1.4.2 Procedure.87 7.3
47、.1.5 Test requirements87 7.3.2 Multipath fading Case 287 7.3.2.1 Definition and applicability.87 7.3.2.2 Minimum requirement 88 7.3.2.2.1 3,84 Mcps TDD Option.88 7.3.2.2.2 1,28 Mcps TDD Option.88 7.3.2.3 Test purpose 89 7.3.2.4 Method of test .89 7.3.2.4.1 Initial conditions89 7.3.2.4.2 Procedure.90
48、 7.3.2.5 Test requirements90 7.3.3 Multipath fading Case 390 7.3.3.1 Definition and applicability.90 7.3.3.2 Minimum requirements.90 7.3.3.2.1 3,84 Mcps TDD Option.90 7.3.3.2.2 1,28 Mcps TDD Option.91 7.3.3.3 Test purpose 92 7.3.3.4 Method of test .92 7.3.3.4.1 Initial conditions92 7.3.3.4.2 Procedu
49、re.92 7.3.3.5 Test requirements 92 7.4 Base station transmit diversity mode for 3,84 Mcps TDD Option .92 7.4.1 Demodulation of BCH in SCTD mode.92 7.5 Power control in downlink .92 7.5.1 Definition and applicability 92 7.5.2 Power control in downlink for 3.84 Mcps TDD option, constant BLER Target 93 7.5.2.1 Minimum requirements.93 7.5.2.2 Test purpose 93 7.5.2.3 Method of test .93 7.5.2.3.1 Initial conditions93 7.5.2.3.2 Procedure.94 7.5.2.4 Test Requirements.94 7.5.3 Power control in downlink for 1,28 Mcps TDD option, constant BLER Target 94 7.5.3.1 Definition and applicabili
