ETSI EN 300 064-1-1998 Integrated Services Digital Network (ISDN) Direct Dialling in (DDI) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol Part 1 .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 15413-1983 Bottom blocks for lifting appliances lifting hook nuts《起重机的下滑车 提升吊钩螺母》.pdf

DIN 15414-1983 Bottom blocks for lifting appliances securing plates《提升设备的下滑车 安全板》.pdf

DIN 15417-1982 Cranes bottom blocks type D rope pulleys with plain bearings《起重机 下滑车 带滑动轴承的D型绳索轮》.pdf

DIN 15418-1-1982 Cranes bottom blocks type C rope pulleys with deep groove ball bearing without internal sleeve《起重机 下滑车 无内套带深槽滚珠轴承的C型绳轮》.pdf

DIN 15418-2-1982 Cranes bottom blocks spacer sleeves for type C rope pulleys with deep groove ball bearing without internal sleeve《起重机的下滑车 无内轴套深滚道滚珠轴承的C型绳索滑轮的间隔套》.pdf

DIN 15418-3-1982 Cranes bottom blocks sealing covers for type C rope pulleys with deep groove ball bearing without internal sleeve《起重机的下滑车 无内轴套深滚道滚珠轴承的C型绳索滑轮的油封盖》.pdf

DIN 15421-1-1982 Cranes bottom blocks type B rope pulleys with deep groove ball bearing and internal sleeve《起重机的下滑车 带深滚道滚珠轴承和内轴套的B型绳索滑轮》.pdf

DIN 15421-2-1982 Cranes bottom blocks internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve《起重机 下滑车 带深滚道滚珠轴承和内套筒的B型绳索轮的内轴套和隔.pdf

DIN 15421-3-1982 Cranes bottom blocks sealing covers for type B rope pulleys with deep groove ball bearing and internal sleeve《起重机 下滑车 带深滚道滚珠轴承和内套筒的B型绳索轮的油封盖》.pdf