ETSI EN 300 207-4-2001 Integrated Services Digital Network (ISDN) Diversion Supplementary Services Digital Subscriber Signalling System No One (DSS1) Protocol Part 4 Abstract Test _1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 25 4154-1964 Measuring parts of reference gauges on wearing for ring thread GO gauges Whitworth thread Diameter W 1 8 - W 3 《穿过型环螺纹校准量规的测量部件 惠氏螺纹 W 1 8 到W 3 直径》.pdf

CSN 25 4155-1964 Limit ring thread NOT GO gauges Whitworth thread Diameter W 1 8 - W 3 《非穿过型规限制环形螺纹 惠氏螺纹 W 1 8 - W3 直径》.pdf

CSN 25 4156-1964 Reference gauges for ring NOT GO gauges Whitworth thread Diameter W 1 8 - W 3 《非穿过型环形螺纹校准规 惠氏螺纹 1 S W 9 直径》.pdf

CSN 25 4157-1964 Measuring parts of reference gauges for ring thread NOT GO gauges Whitworth thread Diameter W 1 8 - W 3 《非穿过型端螺纹校准量规的测量部件 惠氏螺纹 W 1 8 到W 3 直径》.pdf

CSN 25 4170-1963 Cylindrical limit thread gauges bothsided Cylindrical pipe thread Diameter G 1 8 - G 7 8 《双边圆柱形极限螺纹规 圆柱形导管螺纹 1 8 - G 7 8 直径》.pdf

CSN 25 4171-1963 Cylindrical thread GO gauges Cylindrical pipe thread Diameter G 1 - G 3 1 2 《圆柱型螺纹穿过型量规 圆柱型管螺纹 O 1 3 1 2 直径》.pdf

CSN 25 4172-1963 Measuring parts of GO limit of cylindrical thread gauges Cylindrical pipe thread Diameter G 1 8 - G 3 1 2 《穿过限圆柱形螺纹规的测量部件 圆柱形导管螺纹 直径G 1 8 -G3 1 2》.pdf

CSN 25 4173-1963 Cylindrical thread NOT GO gauges Cylindrical pipe thread Diameter G 1 - G 3 1 2 《非穿过型规圆柱形螺纹 圆柱形导管螺纹 G 1 3 1 2 直径》.pdf

CSN 25 4174-1963 Measuring parts of NOT GO limits of cylindrical thread gauges Cylindrical pipe thread Diameter G 1 8 - G 3 1 2 《非穿过型 圆柱型螺纹规限制的测量部件 圆柱形导管螺纹 G 1 8 - O 3 1 2 直径》.pdf