ETSI EN 300 210-4-1998 Integrated Services Digital Network (ISDN) Freephone (FPH) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol Part 4 Abstract _1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 8980-5-2006 Ophthalmic optics - Uncut finished spectacle lenses - Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant《眼科光学 未打磨完成的眼镜片 耐磨眼镜片的最.pdf

BS EN ISO 8985-1998 Plastics - Ethylene vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content《塑料 乙烯 乙烯基醋酸盐共聚物(ENAC)热塑性塑料 乙烯基醋酸盐含量的测定》.pdf

BS EN ISO 8986-1-2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Designation system and basis for specifications《塑料 聚丁烯-1(PB-1)的模塑和挤塑材料 名称与符号系统和规范基础》.pdf

BS EN ISO 8986-2-2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Preparation of test specimens and determination of properties《塑料 聚丁烯-1(PB-1)的模塑和挤塑材料 试样制备和性能.pdf

BS EN ISO 8987-2006 Plastics - Phenolic resins - Determination of reactivity on aB-transformat ion test plate《塑料 酚醛树脂 aB-转换离子试验板上的活性测定》.pdf

BS EN ISO 8988-2006 Plastics - Phenolic resins - Determination of hexamethylene-tetramine content - Kjeldahl method perchloric acid method and hydrochloric acid method《塑料 酚醛树脂 六亚甲基.pdf

BS EN ISO 8989-1998 Plastics - Liquid phenolic resins - Determination of water miscibility《塑料 液体酚醛树脂 水混溶性的测定》.pdf

BS EN ISO 8990-1996 Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box《隔热 稳定状态热传输特性的测定 校正及屏蔽的隔热箱》.pdf

BS EN ISO 8993-2010 Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Chart method《铝和铝合金的阳极氧化 点状腐蚀评估的评级系统 图版法》.pdf