ETSI EN 300 324-8-2000 V Interface at the Digital Local Exchange (LE) V5 1 Interface for the Support of Access Network (AN) Part 8 Abstract Test Suite (ATS) and Partial Protocol Im_1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 16063-12-2002 Methods for the calibration of vibration and shock transducers - Primary vibration calibration by the reciprocity method《校准振动和冲击传感器的方法 用往复式方法进行初级振动校准》.pdf

BS ISO 16063-15-2006 Methods for the calibration of vibration and shock transducers - Primary angular vibration calibration by laser interferometry《振动和冲击传感器的校准方法 用激光干涉测量法进行初级振动角校准》.pdf

BS ISO 16063-16-2014 Methods for the calibration of vibration and shock transducers Calibration by Earth’s gravitation《振动和冲击传感器校准方法 采用地心引力的校准》.pdf

BS ISO 16063-17-2016 Methods for the calibration of vibration and shock transducers Primary calibration by centrifuge《振动与冲击传感器的校准方法 离心机法一次校准》.pdf

BS ISO 16063-31-2009 Methods for the calibration of vibration and shock transducers - Testing of transverse vibration sensitivity《振动和冲击传感器的校准方法 横向振动灵敏度的测试》.pdf

BS ISO 16063-32-2016 Methods for the calibration of vibration and shock transducers Resonance testing Testing the frequency and the phase response of accelerometers by means of sho.pdf

BS ISO 16063-41-2011 Methods for the calibration of vibration and shock transducers Calibration of laser vibrometers《震动和冲击传感器的校准方法 激光振动计的校准》.pdf

BS ISO 16063-42-2014 Methods for the calibration of vibration and shock transducers Calibration of seismometers with high accuracy using acceleration of gravity《振动和冲击传感器校准方法 采用重力加速.pdf

BS ISO 16063-43-2015 Methods for the calibration of vibration and shock transducers Calibration of accelerometers by model-based parameter identification《振动和冲击传感器校准方法 基于模型的参数识别的加速度.pdf