1、 ETSI EN 300 392-5 V2.5.1 (2016-10) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operation (DMO); Part 5: Peripheral Equipment Interface (PEI) EUROPEAN STANDARD ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 2 Reference REN/TCCE-03246 Keywords data, interface, TETRA, V+D, voice
2、ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: ht
3、tp:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived
4、 difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision
5、or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSu
6、pportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written author
7、ization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE
8、are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 3 Contents Intellectual Property Rights 22g3Foreword . 22g3Modal verbs
9、terminology 23g31 Scope 24g32 References 24g32.1 Normative references . 24g32.2 Informative references 26g33 Symbols and abbreviations . 26g33.1 Symbols 26g33.2 Abbreviations . 27g34 Overview of TETRA PEI . 30g34.1 Introduction 30g34.2 Protocol architecture. 31g34.3 Context model 32g34.4 Void 35g34.
10、5 SDS Message stacks . 35g34.5.0 General on SDS Message stacks . 35g34.5.1 Status message texts 35g34.5.2 SDS 1 message texts . 35g34.5.3 Status and SDS types 1, 2 and 3 . 35g34.5.4 SDS type 4 36g34.6 Phone books . 36g34.7 Reserved status values considerations 36g34.8 SDS-TL considerations 36g34.9 A
11、T commands 37g34.9.1 General on AT commands 37g34.9.2 AT command state 39g34.9.3 AT circuit mode data state 39g34.9.4 TNP1 and packet data state . 40g34.9.5 Transitions between states 40g34.9.5.1 Transition from AT command state to AT circuit mode data state . 40g34.9.5.2 Transition from AT circuit
12、mode data state to AT command state . 40g34.9.5.3 Transition from AT command state to TNP1 or packet data state 41g34.9.5.4 Transition from TNP1 and packet data state to AT command state 41g34.10 TNP1 and IP network layer 41g34.10.1 General operation 41g34.10.2 IP addressing . 41g34.10.3 Local mode
13、. 42g34.10.4 Wide mode 42g34.11 TNP1 operation 42g34.12 Link start up at the MT . 43g35 Physical layer . 43g35.1 General on physical layer . 43g35.2 Physical layer for V.24/V.28 44g35.2.1 Electrical characteristics for V.24/V.28 44g35.2.2 Physical connection 44g35.2.3 Character format . 45g35.2.4 Da
14、ta transmission rate for V.24/V.28 . 45g35.3 Wire-line high rate connectivity technologies 45g35.3.1 General 45g35.3.2 Universal Serial Bus . 46g35.3.3 USB On-The-Go . 47g35.4 Wireless high rate connectivity 47g35.4.1 General 47g3ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 4 5.4.2 Wireless Security 47g3
15、5.4.3 Certified Wireless USB 48g35.4.4 Bluetooth 48g36 AT command set 48g36.1 General on AT command set 48g36.2 Limitations . 49g36.3 SDS user data . 49g36.4 AT command syntax 50g36.4.1 General on AT command syntax 50g36.4.2 Command line . 50g36.4.2.0 Command line structure 50g36.4.2.1 Prefix . 50g3
16、6.4.2.2 Body 50g36.4.2.3 Termination Character 50g36.4.2.4 Concatenating extended commands 50g36.4.2.5 Multiline extended commands 50g36.4.3 Command types 51g36.4.4 Parameters. 52g36.4.5 AT command examples 52g36.4.6 Information responses and result codes 53g36.4.6.1 General on information responses
17、 and result codes 53g36.4.6.2 Information Responses 53g36.4.6.3 Result Code. 53g36.4.6.4 AT result examples in verbose mode 54g36.4.6.5 AT result examples in numeric mode 56g36.4.6.6 Aborting information results and result codes. 57g36.4.6.7 Unsolicited nested responses . 57g36.4.7 Handling of unkno
18、wn parameters . 59g36.5 Existing V.250 commands for call control . 60g36.5.1 Commands 60g36.5.2 Result Codes . 60g36.5.3 Dialled string and user identity . 60g36.6 Existing V.250 commands for PEI control . 61g36.6a Modified V.250 commands for PEI control . 61g36.6a.1 General on modified V.250 comman
19、ds for PEI control 61g36.6a.2 Line termination character: S3 62g36.6a.2.1 General on S3 62g36.6a.2.2 Description 62g36.6a.2.3 S3 set syntax 62g36.6a.2.4 S3 read syntax . 62g36.6a.2.5 S3 read result code text . 62g36.6a.2.6 S3 test syntax 62g36.6a.2.7 S3 test result syntax . 62g36.6a.3 Response forma
20、tting character: S4 . 63g36.6a.3.1 General on S4 63g36.6a.3.2 Description 63g36.6a.3.3 S4 set syntax 63g36.6a.3.4 S4 read syntax . 63g36.6a.3.5 S4 read result code text . 63g36.6a.3.6 S4 test syntax 63g36.6a.3.7 S4 test result syntax . 63g36.6a.4 Line editing character: S5 . 63g36.6a.4.1 General on
21、S5 63g36.6a.4.2 Description 64g36.6a.4.3 S5 set syntax 64g36.6a.4.4 S5 read syntax . 64g36.6a.4.5 S5 read result code text . 64g36.6a.4.6 S5 test syntax 64g36.6a.4.7 S5 test result syntax . 64g36.6a.5 Echo: E . 64g36.6a.5.1 General on E 64g3ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 5 6.6a.5.2 Descript
22、ion 64g36.6a.5.3 E set syntax . 64g36.6a.5.4 E read syntax . 65g36.6a.5.5 E read result code text . 65g36.6a.5.6 E test syntax 65g36.6a.5.7 E test result syntax 65g36.6a.6 Result code suppression: Q . 65g36.6a.6.1 General on Q . 65g36.6a.6.2 Description 65g36.6a.6.3 Q set syntax . 65g36.6a.6.4 Q rea
23、d syntax 65g36.6a.6.5 Q read result code text . 65g36.6a.6.6 Q test syntax 66g36.6a.6.7 Q test result syntax 66g36.6a.7 MT response format: V . 66g36.6a.7.1 General on V . 66g36.6a.7.2 Description 66g36.6a.7.3 V set syntax . 66g36.6a.7.4 V read syntax 66g36.6a.7.5 V read result code text . 66g36.6a.
24、7.6 V test syntax 66g36.6a.7.7 V test result syntax 66g36.6a.8 Circuit 109 (DCD) behavior: Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/
25、). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the pres
26、ent document. Foreword This European Standard (EN) has been produced by ETSI Technical Committee TETRA and Critical Communications Evolution (TCCE). The present document is part 5 of a multi-part deliverable covering the Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operat
27、ion (DMO), as identified below: ETSI EN 300 392-1: “General network design“; ETSI EN 300 392-2: “Air Interface (AI)“; ETSI EN 300 392-3: “Interworking at the Inter-System Interface (ISI)“; ETSI ETS 300 392-4: “Gateways basic operation“; ETSI EN 300 392-5: “Peripheral Equipment Interface (PEI)“; ETSI
28、 EN 300 392-7: “Security“; ETSI EN 300 392-9: “General requirements for supplementary services“; ETSI EN 300 392-10: “Supplementary services stage 1“; ETSI EN 300 392-11: “Supplementary services stage 2“; ETSI EN 300 392-12: “Supplementary services stage 3“; ETSI ETS 300 392-13: “SDL model of the Ai
29、r Interface (AI)“; ETSI ETS 300 392-14: “Protocol Implementation Conformance Statement (PICS) proforma specification“; ETSI TS 100 392-15: “TETRA frequency bands, duplex spacings and channel numbering“; ETSI TS 100 392-16: “Network Performance Metrics“; ETSI TR 100 392-17: “TETRA V+D and DMO specifi
30、cations“; ETSI TS 100 392-18: “Air interface optimized applications“. NOTE 1: Part 3, sub-parts 6 and 7 (Speech format implementation), part 4, sub-part 3 (Data networks gateway), part 10, sub-part 15 (Transfer of control), part 13 (SDL) and part 14 (PICS) of this multi-part deliverable are in statu
31、s “historical“ and are not maintained. NOTE 2: Some parts are also published as Technical Specifications such as ETSI TS 100 392-2 and those may be the latest version of the document. ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 23 National transposition dates Date of adoption of this EN: 4 October 2016
32、Date of latest announcement of this EN (doa): 31 January 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 July 2017 Date of withdrawal of any conflicting National Standard (dow): 31 July 2017 Modal verbs terminology In the present document “shall“, “shal
33、l not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct
34、 citation. ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 24 1 Scope The present document specifies the functional and technical aspects of TETRA Peripheral Equipment Interface (PEI) that is the interface between a Terminal Equipment type 2 (TE2) and a Mobile Termination type 2 (MT2) at reference point RT.
35、 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (incl
36、uding any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long te
37、rm validity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 300 392-1: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 1: General network design“. 2 ETSI TS 101 369 (V7.2.0): “Digital cellular telecommunications system (Phase 2
38、+); Terminal Equipment to Mobile Station (TE-MS) multiplexer protocol (3GPP TS 07.10 version 7.2.0 Release 1998)“. 3 ETSI EN 300 392-2: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI)“. 4 Recommendation ITU-T V.24: “List of definitions for interchange circuits b
39、etween data terminal equipment (DTE) and data circuit-terminating equipment (DCE)“. 5 Recommendation ITU-T V.250: “Serial asynchronous automatic dialling and control“. 6 Recommendation ITU-T V.28: “Electrical characteristics for unbalanced double-current interchange circuits“. 7 Void. 8 Recommendati
40、on ITU-T T.50: “International Reference Alphabet (IRA) (Formerly International Alphabet No. 5 or IA5) - Information technology - 7-bit coded character set for information interchange“. 9 ETSI TS 127 007 (V12.8.0 (2015-04): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Tele
41、communications System (UMTS); LTE; AT command set for User Equipment (UE) (3GPP TS 27.007 version 12.8.0 Release 12)“. 10 IETF RFC 1661: “The Point-to-Point Protocol (PPP)“. 11 IETF RFC 1662: “PPP in HDLC-like Framing“. 12 ETSI EN 300 392-9: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D);
42、 Part 9: General requirements for supplementary services“. 13 Recommendation ITU-T E.164: “The international public telecommunication numbering plan“. ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 25 14 ETSI EN 300 812-3: “Terrestrial Trunked Radio (TETRA); Subscriber Identity Module to Mobile Equipment (
43、SIM-ME) interface; Part 3: Integrated Circuit (IC); Physical, logical and TSIM application characteristics“. 15 ETSI ES 200 812-2: “Terrestrial Trunked Radio (TETRA); Subscriber Identity Module to Mobile Equipment (TSIM-ME) interface; Part 2: Universal Integrated Circuit Card (UICC); Characteristics
44、 of the TSIM application“. 16 ETSI ETS 300 392-12-7: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 7: Short Number Addressing (SNA)“. 17 ETSI EN 300 392-12-16: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplemen
45、tary services stage 3; Sub-part 16: Pre-emptive Priority Call (PPC)“. 18 ISO 8859-1: “Information technology - 8-bit single-byte coded graphic character sets - Part 1: Latin alphabet No. 1“. 19 Recommendation ITU-T T.35: “Procedure for the allocation of ITU-T defined codes for non-standard facilitie
46、s“. 20 ETSI EN 300 392-7: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 7: Security“. 21 ETSI EN 300 392-12-8: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 8: Area Selection (AS)“. 22 ETSI TS 100 392-2: “Terrestrial Tr
47、unked Radio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI)“. 23 ETSI TS 100 392-7: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 7: Security“. 24 ETSI TS 100 392-15: “Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D); Part 15: TETRA frequency bands, duplex spacing
48、s and channel numbering“. 25 ETSI EN 300 396-3: “Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 3: Mobile Station to Mobile Station (MS-MS) Air Interface (AI) protocol“. 26 ETSI EN 300 396-6: “Terrestrial Trunked Radio (TETRA); Direct Mode Operation (
49、DMO); Part 6: Security“. 27 Recommendation ITU-T V.42bis: “Data compression procedures for data circuit-terminating equipment (DCE) using error correction procedures“. 28 USB Implementers Forum, Inc.: “Universal Serial Bus (USB) Specification, Revision 2.0“. NOTE: Available at: http:/www.usb.org. 29 USB Implementers Forum Inc.: “On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification Revision 2.0 version 1.1“. NOTE: Available at: http:/www.usb.org/developers/onthego/USB_OTG_and_EH_2-0.pdf. 30 U
