ETSI EN 300 426-2004 Private Integrated Services Network (PISN) Inter-exchange signalling protocol Call intrusion supplementary service (V1 3 1 ISO IEC 14846 (2003) modified)《专用综合业.pdf

上传人:postpastor181 文档编号:728581 上传时间:2019-01-09 格式:PDF 页数:6 大小:26.60KB
下载 相关 举报
ETSI EN 300 426-2004 Private Integrated Services Network (PISN) Inter-exchange signalling protocol Call intrusion supplementary service (V1 3 1 ISO IEC 14846 (2003) modified)《专用综合业.pdf_第1页
第1页 / 共6页
ETSI EN 300 426-2004 Private Integrated Services Network (PISN) Inter-exchange signalling protocol Call intrusion supplementary service (V1 3 1 ISO IEC 14846 (2003) modified)《专用综合业.pdf_第2页
第2页 / 共6页
ETSI EN 300 426-2004 Private Integrated Services Network (PISN) Inter-exchange signalling protocol Call intrusion supplementary service (V1 3 1 ISO IEC 14846 (2003) modified)《专用综合业.pdf_第3页
第3页 / 共6页
ETSI EN 300 426-2004 Private Integrated Services Network (PISN) Inter-exchange signalling protocol Call intrusion supplementary service (V1 3 1 ISO IEC 14846 (2003) modified)《专用综合业.pdf_第4页
第4页 / 共6页
ETSI EN 300 426-2004 Private Integrated Services Network (PISN) Inter-exchange signalling protocol Call intrusion supplementary service (V1 3 1 ISO IEC 14846 (2003) modified)《专用综合业.pdf_第5页
第5页 / 共6页
点击查看更多>>
资源描述

1、 ETSI EN 300 426 V1.3.1 (2004-01)European Standard (Telecommunications series) Private Integrated Services Network (PISN);Inter-exchange signalling protocol;Call intrusion supplementary serviceISO/IEC 14846 (2003), modifiedETSI ETSI EN 300 426 V1.3.1 (2004-01) 2 Reference REN/ECMA-00248 Keywords end

2、orsement, ISDN, PISN, PSS1, QSIG, stage 3, supplementary service, VPN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 78

3、03/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference ver

4、sion is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of st

5、atus. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permis

6、sion. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Ma

7、rks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 426 V1.3.1 (2004-01) 3 Intellectual Property Rights IPRs essential or potentially essential to the

8、 present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI

9、in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as

10、 to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA on behalf of its members and those o

11、f the European Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrated Services Digital Network (ISDN) concepts as develope

12、d by ITU-T and conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document specifies the signalling protocol for use at the Q reference point in support of the Call Intrusion supplementary service. The protocol defined in the present docu

13、ment forms part of the PSS1 protocol (informally known as QSIG). The present document endorses an International Standard, ISO/IEC 14846. National transposition dates Date of adoption of this EN: 19 December 2003 Date of latest announcement of this EN (doa): 31 March 2004 Date of latest publication o

14、f new National Standard or endorsement of this EN (dop/e): 30 September 2004 Date of withdrawal of any conflicting National Standard (dow): 30 September 2004 Endorsement notice The elements of International Standard ISO/IEC 14846 (2003) apply, with the following modifications. ETSI ETSI EN 300 426 V

15、1.3.1 (2004-01) 4 Clause 3 Replace the first paragraph by: The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or no

16、n-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. Insert the following normat

17、ive references at the end of clause 3: 17 ETSI EN 300 172: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Circuit-mode basic services ISO/IEC 11572 (2000), modified“. 18 ETSI EN 300 171: “Private Integrated Services Network (PISN); Service description, functional ca

18、pabilities and information flows; Circuit-mode 64 kbit/s bearer services ISO/IEC 11574 (2000), modified“. 19 ETSI ETS 300 475-1: “Private Telecommunication Network (PTN); Reference configuration; Part 1: Reference configuration for PTN eXchanges (PTNXs) ISO/IEC 11579-1 (1994), modified“. 20 ETSI EN

19、300 239: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Generic functional protocol for the support of supplementary services ISO/IEC 11582 (2002), modified“. 21 ETSI EN 300 258: “Private Integrated Services Network (PISN); Specification, functional model and inform

20、ation flows; Path replacement additional network feature ISO/IEC 13863 (1998), modified“. 22 ETSI EN 300 261: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Call transfer supplementary service ISO/IEC 13869 (2003), modified“. 23 ETSI EN 300 257: “Private Integrated

21、Services Network (PISN); Inter-exchange signalling protocol; Call diversion supplementary service ISO/IEC 13873 (2003), modified“. 24 ETSI EN 300 259: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Path replacement Additional Network Feature (ANF) ISO/IEC 13874 (200

22、3), modified“. 25 ETSI EN 300 362: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Call offer supplementary service ISO/IEC 14843 (2003), modified“. 26 ETSI EN 300 364: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Do not disturb an

23、d do not disturb override supplementary services ISO/IEC 14844 (2003), modified“. 27 ETSI EN 300 425: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Call intrusion supplementary service ISO/IEC 14845 (1996), modified“. ETSI ETSI EN 300 426 V1.3.1

24、(2004-01) 5 Throughout the text of ISO/IEC 14846 Replace references as shown in the table below. Reference in ISO/IEC 14846 Modified reference ISO/IEC 11572 EN 300 172 17 ISO/IEC 11574 EN 300 171 18 ISO/IEC 11579-1 ETS 300 475-1 19 ISO/IEC 11582 EN 300 239 20 ISO/IEC 13863 EN 300 258 21 ISO/IEC 1386

25、9 EN 300 261 22 ISO/IEC 13873 EN 300 257 23 ISO/IEC 13874 EN 300 259 24 ISO/IEC 14843 EN 300 362 25 ISO/IEC 14844 EN 300 364 26 ISO/IEC 14845 EN 300 425 27 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 300 426 V1.3.1 (2004-01) 6 History Document history Edition 1 September 1995 Publication as ETS 300 426 V1.2.1 March 1999 Publication V1.3.1 August 2003 One-step Approval Procedure OAP 20031219: 2003-08-20 to 2003-12-19 V1.3.1 January 2004 Publication

展开阅读全文
相关资源
猜你喜欢
  • ASTM E2474-2006 Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology《利用过程分析技术进行制药过程设计的标准规程》.pdf ASTM E2474-2006 Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology《利用过程分析技术进行制药过程设计的标准规程》.pdf
  • ASTM E2474-2014 Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology《使用过程分析技术进行制药工艺设计的标准实施规程》.pdf ASTM E2474-2014 Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology《使用过程分析技术进行制药工艺设计的标准实施规程》.pdf
  • ASTM E2475-2010 Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control《与药物制造和控制相关的工艺理解的标准指南》.pdf ASTM E2475-2010 Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control《与药物制造和控制相关的工艺理解的标准指南》.pdf
  • ASTM E2475-2010(2016) Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control《与药物制造和控制相关的工艺理解的标准指南》.pdf ASTM E2475-2010(2016) Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control《与药物制造和控制相关的工艺理解的标准指南》.pdf
  • ASTM E2476-2009 Standard Guide for Risk Assessment and Risk Control as it Impacts the Design Development and Operation of PAT Processes for Pharmaceutical Manufacture《影响到PAT过程的设计、制.pdf ASTM E2476-2009 Standard Guide for Risk Assessment and Risk Control as it Impacts the Design Development and Operation of PAT Processes for Pharmaceutical Manufacture《影响到PAT过程的设计、制.pdf
  • ASTM E2476-2016 Standard Guide for Risk Assessment and Risk Control as it Impacts the Design Development and Operation of PAT Processes for Pharmaceutical Manufacture《影响PAT过程的设计 制定.pdf ASTM E2476-2016 Standard Guide for Risk Assessment and Risk Control as it Impacts the Design Development and Operation of PAT Processes for Pharmaceutical Manufacture《影响PAT过程的设计 制定.pdf
  • ASTM E2478-2006a Standard Practice for Determining Damage-Based Design Stress for Fiberglass Reinforced Plastic (FRP) Materials Using Acoustic Emission《玻璃纤维整形加固材料(FRP)的基于损害的设计标准测定的.pdf ASTM E2478-2006a Standard Practice for Determining Damage-Based Design Stress for Fiberglass Reinforced Plastic (FRP) Materials Using Acoustic Emission《玻璃纤维整形加固材料(FRP)的基于损害的设计标准测定的.pdf
  • ASTM E2478-2011 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission《用声发射测定玻璃纤维增强塑料(FRP)材料基于损伤的设.pdf ASTM E2478-2011 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission《用声发射测定玻璃纤维增强塑料(FRP)材料基于损伤的设.pdf
  • ASTM E2478-2011(2016) Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission《采用声发射测定玻璃纤维增强塑料 (GFRP.pdf ASTM E2478-2011(2016) Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission《采用声发射测定玻璃纤维增强塑料 (GFRP.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1