ETSI EN 300 436-1-2000 Broadband Integrated Services Digital Network (B-ISDN) Signalling ATM Adaptation Layer (SAAL) Service Specific Connection Oriented Protocol (SSCOP) Part 1 Pr_1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI ASME B94.49-1975 Spade Drill Blades and Spade Drill Holders《扁钻片和扁钻夹持装置》.pdf

ANSI ASME B94.51M-1999 Specifications for Band Saw Blades (Metal Cutting)《带锯条规范(金属切割)》.pdf

ANSI ASME B94.52M-1999 Specifications for Hacksaw Blades《弓形锯锯条规范》.pdf

ANSI ASME B94.53-1978 Solid Steel Rectangular Metal Cutting Squaring Shear Knives Dimensional Tolerances《实心钢制矩形金属切割方形剪切刀尺寸公差》.pdf

ANSI ASME B94.54-1999 Specifications for Hole Saws Hole Saw Arbors and Hole Saw Accessories《孔锯、孔锯心轴和孔锯附件规范》.pdf

ANSI ASME B94.55M-1985 Tool Life Testing with Single-Point Turning Tools (Revision of ANSI B94.34-1946 and B94.36-1956)《单刃车刀的寿命试验》.pdf

ANSI ASME B94.6-1984 Knurling《滚花》.pdf

ANSI ASME B94.7-1980 Hobs《滚铣刀》.pdf

ANSI ASME B94.9-2008 Taps Ground Thread With Cut Thread Appendix (Inch and Metric Sizes) (Incorporating Errata February 2010)《丝锥 带切削螺纹附件的研磨和切削螺纹(英寸和米制系列)》.pdf