ETSI EN 300 659-2-2001 Access and Terminals (AT) Analogue Access to the Public Switched Telephone Network (PSTN) Subscriber Line Protocol over the Local Loop for Display (and Relat_1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 65736-5-1984 Aerospace bolt calculation values static load for countersunk head bolts single shear bolt materials 1 4944 4 and 1 7734 5《航空航天 材料1 4944 4和1 7734 5单向剪切沉头螺栓静载荷的螺栓计算.pdf

DIN 65736-7-1984 Aerospace bolt calculation values static load for countersunk head bolts single shear bolt material 1 6604 6《航空航天 材料1 6604 6单向剪切沉头螺栓静载荷的螺栓计算值》.pdf

DIN 6580-1985 Terminology of chip removing movements and geometry of the chip removing process《切削清除技术 切削清除过程的运动和几何形态》.pdf

DIN 6581-1985 Terminology of chip removing reference systems and angles on the cutting part of the tool《排屑工艺术语 刀具切削部分的参考系统和角度》.pdf

DIN 6582-1988 Terminology of cutting additional terms for the tool wedge and the cutting edge《切削技术 工具、契子和刀刃》.pdf

DIN 6583-1981 Terms of cutting procedures tool life criteria《切削工艺的术语 刀具寿命标准》.pdf

DIN 6584-1982 Terms of the cutting technique forces energy work power《切割技术的术语 切力、能量、工作和功率》.pdf

DIN 6590-1986 Indexable hardmetall (carbide) inserts with wiper edges without fixation hole《平面刃硬质合金无固定孔转位式刀片》.pdf

DIN 6594-1998 Drills with hollow taper shanks and coolant fluid supply according to DIN 69893-1 type A for indexable inserts - Main dimensions《转位式刀片用符合DIN 69893-1 A型要求的带空心锥杆和冷却润滑剂导.pdf