ETSI EN 300 829-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) for Maritime Mobile Earth Stations (MMES) Operating in the 1.pdf

上传人:fatcommittee260 文档编号:728894 上传时间:2019-01-09 格式:PDF 页数:23 大小:1.15MB
下载 相关 举报
ETSI EN 300 829-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) for Maritime Mobile Earth Stations (MMES) Operating in the 1.pdf_第1页
第1页 / 共23页
ETSI EN 300 829-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) for Maritime Mobile Earth Stations (MMES) Operating in the 1.pdf_第2页
第2页 / 共23页
ETSI EN 300 829-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) for Maritime Mobile Earth Stations (MMES) Operating in the 1.pdf_第3页
第3页 / 共23页
ETSI EN 300 829-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) for Maritime Mobile Earth Stations (MMES) Operating in the 1.pdf_第4页
第4页 / 共23页
ETSI EN 300 829-1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) for Maritime Mobile Earth Stations (MMES) Operating in the 1.pdf_第5页
第5页 / 共23页
点击查看更多>>
资源描述

1、EN 300 829 1.1.1 (1998-03) European Standard (Telecommunications series) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) for Maritime Mobile Earth Stations (MMES) operating in the 1 ,5/1,6 GHz bands providing Low Bit Rate Data Communications (LBRDC

2、) for the Global Maritime Distress and Safety System (GMDSS) 2 EN 300 829 VI .I .I (1998-03) Reference DEN/ERM-EMC-022 (7000ico.PDF) Keywords Earth station, EMC, GMDSS, LBRDC, MES, MMSS, mobile, radio, satellite ETSI Secretariat Postal address F-O6921 Sophia Antipolis Cedex - FRANCE Office address 6

3、50 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803188 Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Internet secretariatetsi.fr http:/www.etsi .fr http:/www.etsi.org Copyr

4、ight Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 1998. All rights reserved. 3 EN 300 829 V1.l.l (1998-03) Contents Intellectual Pr

5、operty Rights. . 5 Foreword 5 1 Scope 6 2 References 6 3 Definitions and abbreviations 7 3.1 3.2 Abbreviations. 8 7 Definitions . . . . 4.2 5 5.1 5.2 6 6.1 6.2 6.3 6.4 6.4.1 6.4.2 6.4.3 7 7.1 7.2 8 8.1 8.1.1 8.1.2 4 General test conditions . 8 4.1 4.1.1 Emission tests 9 9 4.1.2 . 4.1.2.1 . 4.1.2.2 9

6、 . 10 Test conditions and configurations . Performance assessment 10 General 10 Ancillary equipment . 11 Performance criteria . 11 11 . 11 Performance criteria A . Performance criteria B . 11 12 12 . 12 . 12 Applicability overview tables 13 Emissions . 13 Immunity . 13 Test methods and limits for em

7、ission tests 13 Radiated emissions 13 13 14 . . . 8.1.3 8.2 8.2.1 8.2.2 8.2.3 9 9.1 9.1.1 9.1.2 9.1.3 9.2 9.2.1 9.2.2 9.2.3 9.3 9.3.1 8.1.2.1 8.1.2.2 Test method, frequency range 150 kHz - 30 MHz 14 Test method, frequency range 30 MHz - 1 GHz . 14 14 Limits . 15 Definition . 15 Test method . 15 16 L

8、imits . Power ports . Test methods and levels for immunity tests . 16 Radio frequency electromagnetic field (80 MHz - 1 O00 MHz) . 16 . 16 Definition . Test method . . 17 Performance criteria 17 Electrostatic discharge 17 . 17 Definition . Test method . . 17 Performance criteria 17 17 . 17 Definitio

9、n . Fast transients, common mode 4 EN 300 829 V1.l.l (1998-03) 9.3.2 9.3.3 9.4 9.4.1 9.4.2 9.4.3 9.5 9.5.1 9.5.2 9.5.3 9.6 9.6.1 9.6.2 9.6.3 .17 Test method . Performance 18 18 Definition . 18 .18 Test method . Performance criteria . 19 19 Definition . 19 .19 Test method . Performance criteria . 19

10、Surge, common and differentia 19 Definition . 20 .20 Test method . Performance 20 RF common mode 150 kHz to 80 MHz . Power supply short term variations Annex A (normative): Subclauses of the present document relevant for compliance with the essential requirements of relevant EC Council Directives 21

11、 Alternative performance check (under investigation) . 22 Annex B (informative): History 23 5 EN 300 829 V1.l.l (1998-03) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, i

12、f any, is publicly available for ETSI members and non-members, and can be found in ETR 3 14: “Intellectual Property Rights (IPRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect of ETSI standards“, which is available free of charge from the ETSI Secretariat. Latest updates are

13、available on the ETSI Web server (http :/www.e tsi. fr/ipr) . Pursuant to the ETSI Interim IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETR 314 (or the updates on http:/www.etsi.fr/ip

14、r) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in respo

15、nse to a mandate from the European Commission issued under Council Directive 83/189/EEC (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document, together with ETS 300 460, is intended to become a Harmonized Stand

16、ard, the reference of which will be published in the Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of the Member States relating to electromagnetic compatibility (“the EMC Directive“) (89/336/EEC as amended). Technical specifications

17、relevant to the EMC Directive are given in annex A. National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (

18、dow): 6 February 1998 31 May 1998 30 November 1998 30 November 1998 6 EN 300 829 V1.l.l (1998-03) 1 Scope The present document covers the assessment of Inmarsat-C Global Maritime Distress and Safety System (GMDSS) and Enhanced Group Call (EGC) Ship Earth Stations, as defiied by the International Mar

19、itime Organization (IMO) to be used for Low Bit Rate Data Communications (LBRDC) in the GMDSS, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions for the enclosure port of the radio equipment are found in the related product standard

20、 ETS 300 460 111 for the effective use of the radio spectrum. The present document specifies the applicable EMC tests, the test methods, the limits and the minimum performance criteria for Ship Earth Stations for the maritime mobile service operating in the Maritime Mobile Satellite Service (MMS S)

21、bands. The ElectroMagnetic Environment used in the present document to develop the technical specifications encompasses the ElectroMagnetic Environment on board ships as identified in EN 60945 13. The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus in m

22、aritime environments. The levels do not cover extreme cases which may occur in any location, but have a low probability of occurrence . Compliance of radio equipment to the requirements of the present document does not sign compliance to any requirements related to the use of the equipment (i.e. lic

23、ensing requirements). Compliance to the present document does not sign compliance to any safety requirements. However, it is the responsibility of the assessor of the equipment that any observations regarding apparatus becoming dangerous or unsafe as a result of the application of the tests defined

24、in the present document, are recorded in the test report. The present document is based on the consideration and guidance as given in ETR 238 12. 2 Re fe ren ces References may be made to: a) specific versions of publications (identified by date of publication, edition number, version number, etc.),

25、 in which case, subsequent revisions to the referenced document do not apply; or b) all versions up to and including the identified version (identified by “up to and including“ before the version identity); or c) all versions subsequent to and including the identified version (identified by “onwards

26、“ following the version identity); or d) publications without mention of a specific version, in which case the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. il CISPR 16-1: “Specification for radio di

27、sturbance and immunity measuring apparatus and methods - Part 1 : Radio disturbance and immunity measuring apparatus“. EN 55022 (1994): “Limits and methods of measurement of radio disturbance characteristics of information technology equipment“. EN 61000-4-2: “Electromagnetic compatibility (EMC) - P

28、art 4: Testing and measurement techniques - Section 2: Electrostatic discharge immunity test“. 21 31 41 EN 61000-4-1 1: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 11 : Voltage dips, short interruptions and voltage variations immunity tests“ 7 EN 300 8

29、29 V1.l.l (1998-03) EN 61000-4-4: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast transienthurst immunity test“. EN 61000-4-5: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity

30、test“. EN 6 1000-4-6: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency fields“ EN 6 1000-4-3 (modified): “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Se

31、ction 3 : Radiated, radio-frequency, electromagnetic field immunity test“. 91 89/336/EEC: “Council Directive on the approximation of the laws of the Member States relating to electromagnetic compatibility“. lo1 92/3 l/EEC: “Council Directive amending Directive 89/336/EEC on the approximation of the

32、laws of the Member States relating to electromagnetic compatibility“. ETS 300 460: “Satellite Earth Stations and Systems (SES); Maritime Mobile Earth Stations (MMESs) operating in the 1,5/1,6 GHz bands providing Low Bit Rate Data Communications (LBRDC) for the Global Maritime Distress and Safety Sys

33、tem (GMDSS); Technical characteristics and methods of measurement“. 111 I21 ETR 23 8 : “ETSVCENELEC standardization programme for the development of Harmonized Standards related to Electro-Magnetic Compatibility (EMC) in the field of telecommunications“. i31 EN 60945: “Maritime navigational equipmen

34、t - General requirements - Method of testing and required test results“. i41 EN 50081-1 (1992): “Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry“. EN 50082-1 (1993): “Electromagnetic compatibility - Generic immunity standard - Part 1: Re

35、sidential, commercial and light industry“. i51 3 3.1 Definitions and abbreviations De fi ni tions For the purposes of the present document, the following definitions apply: ancillary equipment: Equipment (apparatus), used in conjunction with a receiver or transceiver is considered as an ancillary eq

36、uipment (apparatus) if - the equipment is intended for use in conjunction with a receiver or transceiver to provide additional operational andor control features to the radio equipment (e.g. to extend control to another position or location); and the equipment cannot be used on a stand alone basis t

37、o provide user functions independently of a receiver or transceiver; and - - the receiver or transceiver to which it is connected, is capable of providing some intended operation such as transmitting andor receiving without the ancillary equipment; i.e. it is not a sub-unit of the main equipment bas

38、ic functions. artificial antenna: The antenna port(s) of the EUT shall be terminated with a power attenuator of adequate power absorption capability unless there is a requirement to apply an RF input signal to the receiver antenna port. class O: A stand alone EGC receiver. class 1: A basic ship eart

39、h station providing ship-to-shore and shore-to-ship message transfer. 8 EN 300 829 V1.l.l (1998-03) class 2: As for class 1 but with EGC as an alternative to shore-to-ship transfer using a shared receiver. class 3: As for class 1 but with EGC using an independent receiver. enclosure port: The physic

40、al boundary of the apparatus onto which an electromagnetic field may impinge or from which an electromagnetic field may be radiated. Equipment Under Test (EUT): The EUT comprises one or more units and their interconnecting cables as necessary for it to perform its intended functions. port: A particu

41、lar interface of specified equipment (apparatus) with the external electromagnetic environment. ship earth station: A maritime mobile earth station operating in the GMDSS. NOTE: The term “ship earth station“ is used in the present document to align with IMO terminology. 3.2 Ab brevi at ions For the

42、purposes of the present document, the following abbreviations apply: AC AM cw DC EGC EMC emf EUT GMDSS IMO LBRDC MMES MMSS RF STE rmS Alternating Current Amplitude Modulation Continuous Wave Direct Current Enhanced Group Call ElectroMagnetic Compatibility electromotive force Equipment Under Test Glo

43、bal Maritime Distress and Safety System International Maritime Organization Low Bit Rate Data Communication Maritime Mobile Earth Station Maritime Mobile Satellite Service Radio Frequency root mean squared Special Test Equipment 4 General test conditions This clause defies the general test configura

44、tion and is relevant for clauses 8 and 9. 4.1 Test conditions and configurations The equipment shall be tested under normal test conditions. The normal temperature and humidity conditions shall be a combination of temperature and humidity within the following ranges: - temperature +15“C to +35“C - r

45、elative humidity 25 % - 75 % The normal test voltage for equipment to be connected to the AC mains, shall be the nominal mains voltage. The frequency of the test voltage shall be 50 Hz f 1 Hz. The normal test voltage for equipment to be connected to a battery, shall be the nominal voltage of the bat

46、tery (12 V, 24 V etc.). For operation from other power sources, the normal test voltage shall be declared by the manufacturer. The test configuration shall be as close as possible to normal intended use. 9 EN 300 829 V1.l.l (1998-03) If the equipment is part of a system, or can be connected to ancil

47、lary equipment, then it shall be acceptable to test the equipment while connected to the minimum representative configuration of ancillary equipment necessary to exercise the ports. Ports which in normal operation are connected shall be connected to an ancillary equipment or to a representative piec

48、e of cable correctly terminated to simulate the input/output characteristics of the ancillary equipment. RF input/output ports shall be correctly terminated. If the equipment has a large number of ports, then a sufficient number shall be selected to simulate actual operation conditions and to ensure

49、 that all the different types of termination are tested. Ports which are not connected to cables during normal intended operation, e.g. service connectors, programming connectors, temporary connectors etc. shall not be connected to any cables for the purpose of EMC testing. Where cables have to be connected these ports, or interconnecting cables have to be extended in length in order to exercise the EUT, precautions shall be taken to ensure that the evaluation of the EUT is not affected by the addition or extension of these cables. The test conditions, te

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1