1、STD-ETSI EN 301 070-1-ENGL 1998 3400855 0343285 752 = EN 30 1 070- 1 VI 2.2 (1998-09) European Standard (Telecommunications series) Integrated Services Digital Network (ISDN); Signalling System N0.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); P
2、art 1 : Protocol specification ITU-T Recommendation (2.1600 (1 997), modified 2 Reference DEN/SPS-01044-1 (SWo9OipC.PDF) Keywords ISDN, SS7, ISUP, IN, INAP, CS1 Postai address F-O6921 Sophia Antipolis Cedex - FRANCE Office address 650 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Siret No
3、348 623 562 CU17 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (OS) Na 780388 Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Internet secretariat O et.si.fr http:/www.etsi.fr http$www.etsi.org EN 301 070-1 Vi .2.2 (1 99849) Copyright Notification No part may be repr
4、oduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 1998. All rights reserved. ETSI 3 EN 301 070-1 Vi 2.2 (1 998-09) Intellectual Property Rights IPRs essential or potent
5、ially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in SR O00 3 14: “Intellectual Property Rights (IPRs); Essential, orpotentialiy Essential, IPRs
6、notified to ETSI in respect of ETSI standards“, which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.org/ipr). Pursuant to the ETSI IPR Policy, no investigation, including LPR searches, has been carried out by ETSL. No guara
7、ntee can be given as to the existence of other IPRs not referenced in SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee S
8、ignalling Protocols and Switching (SPS). The present document is part 1 of a multi-part EN covering the interactions between ISDN User Part (LSUP) version 3 and Intelligent Network Application Part (NAP) in the scope of N Capability Set 1 (CSl), as identified below: “Protocol specification ITU-T Rec
9、ommendation Q.1600 (1997), modified“; “Protocol Implementation Conformance Statement (PICS) proforma specification“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification“. Part 1: Part
10、 2: Part 3: Part 4: I National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 18 September 1998 31 Dec
11、ember 1998 30 June 1999 30 June 1999 - Endorsement notice The elements of ITU-T Recommendation 4.1600 (1997) apply, with the following modifications. NOTE: New or modified text is indicated using sidebars. In addition, underlining and/or strike-out are used to highlight detailed modifications where
12、necessary. Modifications to ITU-T Recommendation Q.1600 Insert the following clause (Scope) at the start of the document: ETSI - STD.ETS1 EN 301 070-1-ENGL 1998 3400855 0343288 4b1 D 4 EN 301 070-1 V1 .2.2 (1 998-09) The present document specifies the interaction between the ISUP and INAP. The inter
13、action between other simailing svstems and INAP can be found bv consulting the relevant intenvorking recommendation to the ISUP in combination with the ISUPANAP interaction recommendation. The present document specifies procedures in order to provide interaction between ISUP and INAP, Le. to sumort
14、IN specific requirements. Based on the protocol inherent compatibility mechanism a stepwise uprrrade of the ISUP functionalitv is possible. However, the new function is only available for an IN call, if supported in anv of the affected exchanges. The present document only considers the case where th
15、e SSP is located at a transit level. As a consequence this could lead to limitations for ISDN sumlementarv services. The present document does not specify enhancements to the DSSl protocol. which mav be needed due to additional ISUP functions or IN reauirements, respectively. The main subiects of th
16、is interaction specification are the following: S? - - - description of specific call control functions for IN calls: impacts on the ISUP basic call and the ISDN supplementarv services for IN calls: enhancement of the ISUP protocol due to IN specific reauirements. 0.2 references Replace the clause “
17、0.2 references“ with the following clause (References): 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the mesent document References are either specific (identified bv date of publication, edition number. version number, etc.)
18、 or non-specific. 0 For a specific reference. subsequent revisions do not apply. For a non-specific reference. subsequent revisions do applv. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. Ill ETR 318 (1996): “Intelligent Ne
19、twork (IN); IN Capability Set 1 (CS1); Distributed functional w. L21- EN 300 356-1: “Inteerated Services Digital Network (ISDN): Sienalfine Svstem No.7: ISDN User partisup) version 3 for the international interface: Part 1: Basic services IITU-T Recommendations 0.761 to 0.764 (1997). modifiedl “, I3
20、1 EN 300 356 -3: “Intemated Services Digital Network (LSDN): Signalling Svstem No.7: ISDN User Part (ISUP) version 3 for the international interface: Part 3: Calling Line Identification Presentation (CLIP) supplementarv service ILTU-T Recommendation 0.73 1. clause 3 (1993). modifiedl“. L4 1 EN 300 3
21、56 -4 “lntemated Services Digital Network (ISDN): Signalling Svstem No.7: ISDN User Part (ISUP) version 3 for the international interface: Part 4: Calling Line Identification Restriction CLIR) supplementarv service IITU-T Recommendation 0.73 1. clause 4 (1993). modifiedl“. STDmETSI EN 301 070-1-ENGL
22、 1778 = 3400855 0341287 3T8 Reference In ITU-T Modified reference Recommendation Q.1600 ITU-T Recommendation Q.1214 ITU-T Recommendation Q.1214 as modified bv ETR 318 ll ITU-T Recommendation Q.1218 ETS 300 374-1 ll ITU-T Recommendation (2.731 ITU-T Recommendation Q.731 as modified by EN 300 356, par
23、ts 3,4, 5, 6, 10 and . 3 to 81 ITU-T Recommendation Q.732 ITU-T Recommendation (2.732 as modified by EN 300 356, parts 14 and 15 5 EN 301 070-1 V1.2.2 (1 99849) 1 151 EN 300 356-5: “Integrated Services Digital Network (ISDN): Sipnalling System No.7: ISDN User Part (ISUP) version 3 for the internatio
24、nal interface: Part 5: Connected Line Identification Presentation (COLP) supplementarv service IITU-T Recommendation 0.73 1. clause 5 (1993). modifiedl “ . 161 EN 300 356-6: “Intemated Services Digital Network (ISDN): Signalling System No.7: ISDN User Part (ISUP version 3 for the international inter
25、face: Part 6 Connected Line Identification Restriction COLR) supplementarv service IITU-T Recommendation 0.731. clause 6 (1993). modified I “ . 17 I EN 300 356-10: “Integrated Services Digital Network (ISDN): Signalline Svstem No.7: I -Part (ISUP) version 3 for the international interface: Part 10:
26、Subaddressing (SUB) supulementary service IITU-T Recommendation 0.731, clause 8 (1992). modifiedl“. EN 300 356-1 1 : “Integrated Services Digital Network (ISDN: Signalling System No.7: ISDN - User Part (ISUP) version 3 for the international interface: Part 11: Malicious Call Identification MCID) sup
27、plementarv service IITU-T Recommendation 0.731. clause 7 (1997). modifiedl“. EN 300 356-14: “Inteprated Services Digital Network (ISD N): Signalling System No.7: ISDN WPart (ISUP) version 3 for the international interface: Part 14: Exulicit Call Transfer (ECT) supplementarv service IIT-T Recommendat
28、ion 0.732, clause 7 (1996). modifiedl“. SDN 18 1 191 1101 EN 300 356- 15: “lntemated Services Digital Network ISDN1: Sipnalling Svstem No.7: ISDN -Part (ISUP) version 3 for the international interface: Part 15: Diversion supulementarv services IITU-T Recommendation 0.732. clauses 2 to 5 (1997). modi
29、fiedl“. ETS 300 3 74-1 (19941: “lntellieent Network (IN); Intelligent Network Cauability Set 1 (CS1): Core Intellieent Network Application Protocol (iNAP) ; Part 1: Protocol specification“. EN 300 403-1 : “Integrated Services Digital Network (1SDN);Digitai Subscriber Signalling System No. one (DSS1)
30、 protocol; Signalling network laver for circuit-mode basic call control: Part 1 : Protocol specification ITU-T Recommendation Q.93 1 (1993), modified“. 1111 1121 ITU-T Recommendation (2.763 ITU-T Recommendation (2.764 ITU-T Recommendation Q.931 9 and 101 ITU-T Recommendation Q.763 as modified by EN
31、300 356-1 :21 ITU-T Recommendation Q.764 as modified bv EN 300 356-1 :21 ITU-T Recommendation Q.931 as modified by EN 300 403-1 1121 ETSI STDSETSI EN 301 070-L-ENGL L998 m 3400855 0343290 OLT m 6 EN 301 070-1 V1.2.2 (1 998-09) Table 2 Amend the table as shown: Subclause 7.2.6, Correlation id paramet
32、er Replace references to “SI, $2.1.3 Definition of Common Data Types“ and “SI, $2.1.3 Definition of range constants“ with “li, $6.3“. Subclause 7.2.8, SCF id parameter Replace references to “L.51, 82.1.3 Definition of Common Data Types“ and “SI, $2.1.3 Definition of range constants“ with “il, $6.3“.
33、 Subclause 9.1 .i, Successful call Set-up Modify the frst sentence as follows: Jf an IAM is received in a SSP and the cais recogized as IN call, i.e. bv detecting a DP as TDP-R (see subclause 9.3 Detection Point urocesshrr). an InitialDP operation i sent from the SSF to the SCF. If the IAM had been
34、segmented the remainder of the call Set-up information is awaited (see subclause 9.1.1.7 Simde segmentation). The mapping of Darameters is shown in the table 4. ETS - - STD.ETS1 EN 301 070-1-ENGL 1998 3400855 0341291 T5b callinaPartvNumber 7 /Note 4) (see also annex ZA EN 301 070-1 V1.2.2 (1 998-09)
35、 Table 4 Amend the table as shown: ! . Table 5 Amend the table as shown: Table 5, note 3 Replace reference to “S, $3.3.16“ with “li, $9.11“. Table 5, note 5 Delete the entire note. Subclause 9.1.2, Normal call release Replace reference to “151, $3.1.1.5“ with “li, $7.1.5“. Subclause 9.1.3, Suspend,
36、resume Modify the first paragraph as follows: Upon receipt of a SUS message with the indication “network initiated the timer TsUs is started to ensure that a RES message with the indication “network initiated or a REL message is received. In the case that at least one DP monitor mode is set to inter
37、rupted, Fe received SUS message is not passed on. If the timer Tsus expires, the procedures described in 1101 Q.764/8 2.4.3 apply. The value of timer Tsus depends on the time limits received in servicelnteractionhdicators parameter. E TSI 8 EN 301 070-1 V1.22 (1998-09) Subclause 9.2, IN call with SC
38、P request to collect further digits Modify the fist two paragraphs as follows: After sending the InitialDP oueration to the SCP a ReauestReoortBCSMEvent operation to arm DE2 accomDanied bv a number of digits will be collected in the SSP. Encountering DP2. Le. the specified number of dieits has been
39、received. will result in sending an EventReportBCSM operation the SCP. In addition to subclause 9.1.5 the dieits sent to the SCP in the EventReportBCSM operation or- epemtkm shall be taken into account when constructing the cailed M number parameter. 4 Subclause 9.3.1, General Modify the second and
40、third paragraph as follows: In the “notifvAndContinue “ mode the event is reported as EDP-N (notification mode) in the EventReportBCSM operation to the SCF and normal call processing continues as described in subclause 9.1 (IN basic call). In the “interrupted“ mode the event is reported as EDP-R rea
41、uest mode) in the EventReportBCSM operation or+ ,:C,;,and the SSF will wait for instructions from the SCF. Table 7 Amend the table, and add note as shown: I I l NOTE; These are examples of correspondence between cause values and DPs. The network oDerator shall have the Dossibiiitv to define the comp
42、lete maminn between cause values and DPs. It should be noted that any oDerator defined mamine mav contradict those defined in future M Capabilitv Sets. Subclause 9.3.1.3, Release message Replace reference to “S, $3.1.1.5“ with “li, $7.1.5“. Subclause 9.4, Set-up of an IN call to destination B Modify
43、 the fit paragraph as follows: This section describes the Set-up of an M call to destination B after an user interactive dialogue has been performed or after the SSF has reported an EDP-R in the EventReportBCSM operation oi the SCF. In these situations the call Set-up differs from the normal call Se
44、t-up for the N basic call“. - Subclause 9.5, User interactive dialogue (in-band) Modify the first paragraph as follows: If in resmnse to the 1nitiall)P operation, the EventReDortBCSM operation o- ConnectToResource or EstablishTemporarvConnection operation is received (-) ETSI STD=ETSI EN 301 070-1-E
45、NGL 1998 W 3400855 0341293 829 D Completion of calls to busv subscribers ComDletion of calls on no reulv 9 Yes See subclause 11.3.1 ICompletion ssp - Yes See subclause 11.3.2 (Comoletion - SSP of calls to busv subscriber) of calls on no reolv) EN 301 070-1 V1.2.2 (1 998-09) Subclause 9.6, Call gappi
46、ng Replace reference to “IS, $7.3.6“ with “Llll, 89.6“ Subclause 9.7, Service filtering Replace reference to “IS, 87.3.1“ with “Lll, g9.1“ Table 12 Modify the table as follows: I I- I I Subclause 11.3, Completion of calls to busy subscriber Modify the subclauses as shown: I- 11.3 Completion of calls
47、 services I 11.3.1 11.3.1 .i Completion of calls to busv subscribers Actions in the service switchina point - If “reject call completion request“ was received in the INAP servicelnteractionlndicator Darameter (call complet ion treatment indicator). then in a received REL message a “CCBS possible“ in
48、 the diagnostics field of the cause indicators is reulaced with “CCBS not possible“.- ETSI STD-ETSI EN 303 070-3-ENGL 3998 W 3400855 0343294 7b5 = 10 EN 301 070-1 Vl.2.2 (1998-09) 11.3.2 11.3.2.1 Completion of calls on no replv Actions in the service switchina Doint - If “reject call completion requ
49、est“ was received in the NAP servicelnteractionlndicator parameter (call completion treatment indicator). then in a received ACM (subscriber free) message or CPG (alerting) messape a “CCNR possible“ in the CCNR Possible indicator parameter is replaced with “CCNR not possible“. - Appendix I Appendix I has the status of an integral part of the present document. Appendix II Appendix II has the status of an informative annex, describing a network option. Appendi
