1、ETSI EN 301 070-2 1.1.2(2000-11) European Standard (Telecommunications series) Integrated Services Digital Network (ISDN); Signalling System N0.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 2: Protocol Implementation Conformance Statement
2、(PICS) proforma specification 2 ETSI EN 301 070-2 V1.1.2 (2000-1 1) Th Reference DENIS PS-O 1 044-2 Keywords INAP, ISDN, ISUP, PICS, SS7 ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Associati
3、on but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: htti3:lwww. etsi I oq present document may be made available in more than one electronic version or in print. I any cas Df existing perceived
4、difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be awa
5、re that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at If you find errors in the present document, send your comment to: editor etsi.fr Copyright Notification No part may be reproduced except as authoriz
6、ed by written permission. The copyright and the foregoing restriction extend to reproduction in all media. 8 European Telecommunications Standards Institute 2000. All rights reserved. ETSI 3 ETSI EN 301 070-2 V1.1.2 (2000-1 1) Contents Intellectual Property Rights 4 Foreword 4 1 Scope 5 2 References
7、 5 3 Definitions and abbreviations 6 3.1 Definitions 6 3.2 Abbreviations 7 4 Conformance to the PICS proforma specification 7 PICS proforma . 8 Annex A (normative): A . 1 A.l.l A . 1.2 A.2 A.2.1 A.2.2 A.2.3 A.2.4 A.2.5 A.2.6 A . 3 A.4 A.4.1 A.4.2 Instructions for completing the PICS proforma . 8 Pur
8、poses and structure . 8 Abbreviations and conventions 8 Identification of the implementation 9 Implementation under test (IUT) identification . 10 Date of the statement . 9 System under test (SUT) identification . 10 Product supplier 10 Client 10 ICs contact person 10 Identification of the reference
9、 specification . 11 PICS proforma tables 11 Global statement of conformance . 11 Capabilities . 12 History . 13 ETSI 4 ETSI EN 301 070-2 V1.1.2 (2000-1 1) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pert
10、aining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secret
11、ariat. Latest updates are available on the ETSI Web server ClattD:/www.etsP.c/iDr. Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 314 (or the updates on
12、 the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling Protocol and Switching (SPS). The present document is part 2 of a multi-part EN covering
13、the interactions between ISDN User Part (ISUP) version 3 and Intelligent Network Application Part (INAP) in the scope of IN Capability Set 1 (CSl), as identified below: Part 1 : “Protocol specification“; Part 2: Part 3: Part 4: “Protocol Implementation Conformance Statement (PICS) proforma specifica
14、tion“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification“. National transposition dates Date of adoption of this EN Date of latest announcement of this EN (doa): Date of latest publ
15、ication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 27 October 2000 3 1 January 2001 3 1 July 2001 3 1 July 2001 ETSI 5 ETSI EN 301 070-2 V1.1.2 (2000-1 1) 1 Scope The present document contains the validation (conformance
16、) test specification for the interaction between ISUP v3 and INAP CS1 defined in EN 301 070-1 i. The present document applies only to exchanges having implemented the ISUP v3 protocol specification in the call control function (CCF) and the INAP CS1 in the service switching function (SSF) of the exc
17、hange. It is applicable for validation testing of all types of exchanges as defined in the ISUP v3 protocol specification. The present document does not deal with compatibility testing. The main text part of the present document presents the protocol implementation conformance statements (PICS) for
18、the interaction between ISUP v3 and INAP CS1 defined in compliance with the relevant requirements and in accordance with the guidance given in ISO/IEC 9646-7 5. This statement indicates which capabilities and options of a telecommunication specification have been implemented. It is necessary for eva
19、luating the conformance of a particular implementation. The supplier of an implementation that is claimed to comply with the reference specification for the interaction between ISUP v3 and INAP CS1 i, is required to complete a copy of the PICS proforma provided in the present document. 2 References
20、The following documents contain provisions which, through reference in this text, constitute provisions of the present documen t. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions d
21、o not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. u1 ETSI EN 301 070-1 (V1.2): “Integrated Services Digital Network (ISDN); Signalling System No.“; ISDN Use
22、r Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 1: Protocol specification ITU-T Recommendation Q. 1600 (1997), modified“. ETSI EN 300 356-1: “Integrated Services Digital Network (ISDN); Signalling System No.“; ISDN User Part (ISUP) version 4 for the in
23、ternational interface; Part 1: Basic services ITU-T Recommendations Q .76 1 to Q .764 modified “ . ISO/IEC 9646-1 (1997): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. ISO/IEC 9646-3 (1992): “Information technology
24、 - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)“. ISO/IEC 9646-7 (1995): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance
25、 Statements“. ITU-T Recommendation Q. 1218 (1995): “Interface Recommendation for intelligent network cs- 1 “ . 121 131 141 151 161 171 ITU-T Recommendation Q.784.1 (1996): “ISUP basic call test specification: Validation and compatibility for ISUP92 and Q.767 protocols“. ITU-T Recommendation E. 164 (
26、1997): “The international public telecommunication numbering 181 plan“. ETSI 6 ETSI EN 301 070-2 V1.1.2 (2000-1 1) 3 3.1 Definitions and abbreviations Def i n it ions For the purposes of the present document, the following terms and definitions apply: - - terms defined in ISDN User Part (ISUP) refer
27、ence specification EN 301 070-1 i and EN 300 356-1 2; terms defined in ISO/IEC 9646-1 3, ISO/IEC 9646-3 4 and in ISO/IEC 9646-7 5. In particular, the following terms apply: Abstract Test Case (ATC): complete and independent specification of the actions required to achieve a specific test purpose, de
28、fined at the level of abstraction of a particular Abstract Test Method, starting in a stable testing state and ending in a stable testing state (see ISO/IEC 9646-1 3, subclause 3.3.3). Abstract Test Method (ATM): description of how an IUT is to be tested, given at an appropriate level of abstraction
29、 to make the description independent of any particular realization of a Means of Testing, but with enough detail to enable abstract test cases to be specified for this method (see ISO/IEC 9646-1 3, subclause 3.3.5). Abstract Test Suite (ATS): test suite composed of abstract test cases (see ISO/IEC 9
30、646-1 3, subclause 3.3.6). Implementation Under Test (IUT): implementation of one or more OS1 protocols in an adjacent usedprovider relationship, being part of a real open system which is to be studied by testing (see ISO/IEC 9646-1 3, subclause 3.3.43). ISDN number: number conforming to the numberi
31、ng and structure specified in ITU-T Recommendation E.164 SI. Means of Testing (MOT): combination of equipment and procedures that can perform the derivation, selection, parameterization and execution of test cases, in conformance with a reference standardized ATS, and can produce a conformance log (
32、see ISO/IEC 9646-1 3, subclause 3.3.54). PICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes the PICS. PIXIT proforma: document, in the form of a questionnaire, which when completed for the IUT becomes the PIXIT. Point of Control and
33、Observation: point within a testing environment where the occurrence of test events is to be controlled and observed, as defined in an Abstract Test Method (see ISO/IEC 9646-1 3, subclause 3.3.64). Pre-test condition: setting or state in the IUT which cannot be achieved by providing stimulus from th
34、e test environment. Protocol Implementation Conformance Statement (PICS): statement made by the supplier of a protocol claimed to conform to a given specification, stating which capabilities have been implemented (see ISO/IEC 9646-1 3, subclauses 3.3.39 and 3.3.80). Protocol Implementation extra Inf
35、ormation for Testing (PIXIT): statement made by a supplier or implementor of an IUT (protocol) which contains or references all of the information related to the IUT and its testing environment, which will enable the test laboratory to run an appropriate test suite against the IUT (see ISO/IEC 9646-
36、1 3, subclauses 3.3.41 and 3.3.81). System Under Test (SUT): real open system in which the IUT resides (see ISO/IEC 9646-1 3, subclause 3.3.103). ETSI 7 ETSI EN 301 070-2 V1.1.2 (2000-1 1) 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ASP ATM ATS CCF
37、CD cs1 ICs INAP ISDN I-SSP ISUP IUT MOT MTC MTP PICS PIXIT SP SSF SUT TP TSS and TP TSS TTCN A-SSP Abstract Service Primitive Assisting Signalling Switching Point Abstract Test Method Abstract Test Suite Call Control Function Call Deflection IN Capability Set No 1 Implementation Conformance Statemen
38、t Intelligent Network Application Protocol Integrated Services Digital Network Initiating Signalling Switching Point ISDN User Part Implementation Under Test Means Of Testing Main Test Component Message Transfer Part Protocol Implementation Conformance Statement Protocol Implementation extra Informa
39、tion for Testing Signalling Point Service Switching Function System Under Test Test Purpose (context dependent) Test Suite Structure and Test Purposes Test Suite Structure Tree and Tabular Combined Notation The ISUP message acronyms can be found in table 2 of ITU-T Recommendation Q.762 as endorsed b
40、y 2. The following abbreviations apply for ISUP parameters and parameter values. AdSg Address Signals CgPN Calling Party Number GenNot Generic Notification TMR Transmission Medium Requirement us1 User Service Indicator 4 Conformance to the PICS proforma specification A PICS proforma that conforms to
41、 this PICS proforma specification shall be technically equivalent to the document. Annex A in the present document, and shall preserve the numbering and ordering of the items. A PICS that conforms to this PICS proforma specification shall: describe an implementation which is claimed to conform to IS
42、DN User Part (ISUP) v3 reference specification EN 301 070-1 i and EN 300 356-1 2; be a conforming PICS proforma which has been completed in accordance with the instructions for completion given in clause A.l; include the information necessary to uniquely identify both the supplier and the implementa
43、tion. ETSI 8 ETSI EN 301 070-2 V1.1.2 (2000-1 1) Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may reely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and
44、 may further publish the completed PICS. Annex A (normative): PICS proforma A. 1 Instructions for completing the PICS proforma The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. If necessary, the supplier may provide additional comments separately. Mo
45、re detailed instructions are given at the beginning of the different subclauses of the PICS proforma. A.1 .I Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ISDN User Part (ISUP) 97 reference sp
46、ecification EN 301 070-1 and EN 300 356-1 may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into subclauses for the following categories of information: - - identification of the implementation; - - instructions for completing the PICS proform
47、a; identification of the reference protocol specification; PICS proforma tables (containing the global statement of conformance). A. 1.2 Abbreviations and conventions The PICS proforma contained in this annex is composed of information in tabular form in accordance with the guidelines presented in I
48、SO/IEC 9646-7. Item column It contains a number that identifies the item in the table. Item description column It describes each respective item (e.g. parameters, timers, etc.). Reference column It gives reference to the ISUP v3 specification for the supplementary services EN 301 070-1 and EN 300 35
49、6-1, except where explicitly stated otherwise. Status column The following notations, defined in ISO/IEC 9646-7, are used for the status column: - m: mandatory: the capability is required to be supported. - n/a: not applicable: in the given context, it is impossible to use the capability. No answer in the support column is required. - o: optional: the capability may be supported or not. ETSI 9 ETSI EN 301 070-2 V1.1.2 (2000-1 1) - 0.i: qualified optional: for mutually exclusive or selectable options from a set. “i“ is an integer wh
