ETSI EN 301 217-2-1999 V Interfaces at the Digital Service Node (SN) Interfaces at the VB5 2 Reference Point for the Support of Broadband or Combined Narrowband and Broadband Acces.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2328-2014 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws Studs and Nuts《淬火和回火的螺纹钢螺栓 螺钉 螺柱和螺母的脱碳和渗.pdf

ASTM F2328-2017 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws Studs and Nuts《淬火和回火的螺纹钢螺栓 螺钉 螺柱和螺母的脱碳和渗.pdf

ASTM F2328M-2007 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs [Metric]《淬火和回火的螺纹钢螺栓、螺钉和螺柱的脱碳.pdf

ASTM F2328M-2007(2013) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs (Metric)《测定公制淬火与回火螺纹钢螺栓.pdf

ASTM F2328M-2007(2014) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs &40 Metric&41 《测定公制41淬火.pdf

ASTM F2328M-2014 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws Studs and Nuts &40 Metric&41 《淬火和回火的螺纹钢.pdf

ASTM F2328M-2017 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws Studs and Nuts (Metric)《淬火和回火的螺纹钢螺栓 螺钉 .pdf

ASTM F2329 F2329M-2015 Standard Specification for Zinc Coating Hot-Dip Requirements for Application to Carbon and Alloy Steel Bolts Screws Washers Nuts and Special Threaded Fastene.pdf

ASTM F2329-2005 Standard Specification for Zinc Coating Hot-Dip Requirements for Application to Carbon and Alloy Steel Bolts Screws Washers Nuts and Special Threaded Fasteners《碳钢和合.pdf