ETSI EN 301 419-1-2000 Digital Cellular Telecommunications System (Phase 2) Attachment Requirements for Global System for Mobile Communications (GSM) Part 1 Mobile Stations in the .pdf

上传人:priceawful190 文档编号:729491 上传时间:2019-01-08 格式:PDF 页数:89 大小:4.60MB
下载 相关 举报
ETSI EN 301 419-1-2000 Digital Cellular Telecommunications System (Phase 2) Attachment Requirements for Global System for Mobile Communications (GSM) Part 1 Mobile Stations in the .pdf_第1页
第1页 / 共89页
ETSI EN 301 419-1-2000 Digital Cellular Telecommunications System (Phase 2) Attachment Requirements for Global System for Mobile Communications (GSM) Part 1 Mobile Stations in the .pdf_第2页
第2页 / 共89页
ETSI EN 301 419-1-2000 Digital Cellular Telecommunications System (Phase 2) Attachment Requirements for Global System for Mobile Communications (GSM) Part 1 Mobile Stations in the .pdf_第3页
第3页 / 共89页
ETSI EN 301 419-1-2000 Digital Cellular Telecommunications System (Phase 2) Attachment Requirements for Global System for Mobile Communications (GSM) Part 1 Mobile Stations in the .pdf_第4页
第4页 / 共89页
ETSI EN 301 419-1-2000 Digital Cellular Telecommunications System (Phase 2) Attachment Requirements for Global System for Mobile Communications (GSM) Part 1 Mobile Stations in the .pdf_第5页
第5页 / 共89页
点击查看更多>>
资源描述

1、ETSI EN 301 41 9-1 V4.1.1 (2000-04) European Standard (Telecomm unica tions series) Digital cellular telecommunications system (Phase 2); Attachment requirements for Global System for Mobile communications (GSM); Part 1: Mobile stations in the GSM 900 and DCS 1 800 bands; Access (GSM 13.01 version 4

2、.1 .I) (GSM 13.01 version 4.1.1) 2 ETSI EN 301 41 9-1 V4.1.1 (2000-04) Reference RENEMG-071301 PRl Keywords Digital cellular telecommunications system, Global System for Mobile communications (GSM) ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4

3、 93 65 47 16 Siret No 348 623 562 0001 7 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: http:www.etsi.aq The present document may be made available in more than one ele

4、ctronic version or in print. In any c se of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive wi

5、thin ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/www.etsi.orn/lb/status If you find errors in the present document, send your

6、 comment to: editor et.si.fr Coovriaht Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2000. All rights reserved. ETSI (GSM 13.01 vers

7、ion 4.1.1) 3 ETSI EN 301 41 9-1 V4.1.1 (2000-04) Contents Intellectual Property Rights 4 Foreword 4 1 Scope 6 2 References 7 3 Abbreviations . 8 4 General requirements . 9 5 Requirements for terminals 9 6 Requirements for DCS 1 800 band operation simultaneous with GSM 900 band or Extended GSM 900 ba

8、nd operation . 48 Annex A (normative): The Requirement Table (RT) . 50 A.l Introduction to the RT 50 A.2 Format of the tables 50 A.3 References to EN 300 607-1 (GSM 11.10-1) . 51 A.4 Notations used in the RT 51 A.4.1 Status Notations 51 A.4.2 Support Answer Notations 51 AS The Requirement Tables 52

9、A.5.1 Static Requirements. RT A . 52 AS . 1.1 Types of Mobile Stations 52 A.5.1.2 Mobile Station Features 53 A.5.1.3 Teleservices 54 A.5.1.4 Bearer Services . 55 A.5.1.5 Supplementary Services 56 A.5.1.6 Bearer Capability Information 57 A.5.1.7 Additional Information . 67 A.5.2 Dynamic Requirements.

10、 RT B 70 Annex B (informative): Document history . 88 History 89 ETSI (GSM 13.01 version 4.1.1) 4 ETSI EN 301 41 9-1 V4.1.1 (2000-04) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essen

11、tial IPRs, if any, is publicly available for ETSI members and non-members, and can be found in SR O00 3 14: “Intellectual Propero Rights (IPRs); Essential, or potentially Essential, IPRs notifed to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are a

12、vailable on the ETSI Web server (h ttix/www.etsi. ocdini). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR O00 314 (or the updates on the ETSI Web server) which a

13、re, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by the Special Mobile Group (SMG). The present document is part 1 of a multi-part EN covering the attachment requirements for Global System for Mobile commun

14、ications (GSM), as identified below: Part 1: Part 2: “Mobile stations in the GSM 900 and DCS 1 800 bands; Access“; “High Speed Circuit Switched Data (HSCSD) multislot mobile stations; Access“; Part 3: Part 4: Part 5: Part 6: Part 7: “Advanced Speech Call Items (ASCI); Mobile Stations; Access“; “Gene

15、ral Packet Radio Service (GPRS); Mobile stations; Access“; “Cordless Telephony System Mobile Stations (CTS-MS); Access“; “Cordless Telephony System Fixed Part (CTS-FP); Access“; “Railways Band (R-GSM); Mobile Stations; Access“; Part 8: Part 9: “Enhanced Data rates for GSM Evolution (EDGE) Mobile Sta

16、tions; Access“; “Adaptive Multi-Rate Codec (AMR) mobile stations; Access“. The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field o

17、f technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 98/13/EC of the European Parliamant and of the Council relating to telecommu

18、nications terminal equipment and satellite earth station equipment, including the mutual recognition of their conformity (“Directive 98/13/EC“). The present document covers the general access requirements for terminal equipment for Phase 2 of the public land mobile radio service, operating in: - - -

19、 the GSM 900 band; or the DCS 1 800 band; or both in the DCS 1 800 band and the GSM 900 MHz band. The present document contains the procedures and requirements for the approval testing of DCS 1 800 and Multiband terminal equipment for access. The requirements of other standards may apply in addition

20、 to the present document. ETSI (GSM 13.01 version 4.1.1) 5 ETSI EN 301 41 9-1 V4.1.1 (2000-04) For each test, supplementary information is provided, giving ajustification why this item has been selected for regulatory testing, and a reference to the relevant article of the Terminal Directive i. The

21、present document is based on EN 300 607-1 (GSM 11.10-1) 2. The contents of the present document may be subject to continuing work within SMG and may change following formal SMG approval. Should SMG modify the contents of the present document it will then be re-submitted for formal approval procedure

22、s by ETSI with an identifying change of release date and an increase in version number as follows: Version 4.x.y where: 4 GSMPhase2. x the second digit is incremented for all other types of changes, Le. technical enhancements, corrections, updates, etc.; y the third digit is incremented when editori

23、al only changes have been incorporated in the specification. National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National S

24、tandard (dow): 3 1 March 2000 30June2000 3 1 December 2000 31 December 2000 ETSI (GSM 13.01 version 4.1.1) 6 ETSI EN 301 41 9-1 V4.1.1 (2000-04) 1 Scope The present document specifies the technical requirements to be met by terminal equipment capable of connecting to a public telecommunications netw

25、ork. These requirements apply to terminals for Phase 2 of the public land mobile radio service, operating in: - the GSM 900 band: or - the DCS 1 800 band: or - both in the DCS 1 800 band and the GSM 900 MHz band. With a channel separation of 200 kHz, utilising constant envelope modulation and carryi

26、ng traffic channels according to the Time Division Multiple Access (TDMA) principle. The present document specifies the access requirements for terminals as stated above implementing the GSM standard. For each test purpose and its corresponding conformance requirement, a reference is given to the te

27、st method in EN 300 607- 1 (GSM 1 1.10- 1) 2. The requirements apply at the air interface and the Subscriber Identity Module - Mobile Equipment interface for the access requirements, which may be stimulated to perform the tests by additional equipment if necessary. The measurement uncertainty is des

28、cribed in EN 300 607-1 (GSM 11.10-1) 2. The present document covers the essential requirements of the Terminal Directive 98/13/EC i Articles 5d, 5e, 5f. Non access related aspects of speech telephony, where Article 5g has been applied, are covered by EN 301 420. The Terminal Directive 98/13/EC i Art

29、icles 5a and 5b are covered by other directives, and, therefore, not by the present document. In the present document, there are no Electromagnetic Compatibility technical requirements in terms of the Terminal Directive 98/13/EEC i, Article 5c. NOTE 1: Technical Requirements for EMC performance and

30、testing of the equipment are covered by the relevant standards applicable to the EMC Directive 89/336/EEC, annex A. Terminal equipment may be subject to additional requirements in other Common Technical Regulations (CTR) or Harmonized standards depending on the equipment functionality. EN 300 607-1

31、(GSM 11.10-1) 2 constitutes the conformance test suite for GSM. The verification of the conformance requirements in the present document is based on the tests described in this reference. The set of requirements in EN 300 607-1 (GSM 11.10-1) 2 and the set of requirements in the present document need

32、 not be identical. Some requirements only apply to specific types of mobile station (e.g. data tests only apply to mobile stations with a data facility, tests that only apply to GSM900 or only to DCS 1 800 or to both). The following standard indicates the specific test which should be carried out fo

33、r each mobile station type. An active accessory is covered by the present document if it modifies the terminal performance in an aspect which affects conformance to essential requirements. NOTE 2: Only active devices are subject to the present document. Accessories may be tested with specific termin

34、als, and either approved for use with those terminals only, or may possibly be approved for use with a wider range of terminals, depending on the nature and effect of the accessory. ETSI (GSM 13.01 version 4.1.1) 7 ETSI EN 301 41 9-1 V4.1.1 (2000-04) 2 References The following documents contain prov

35、isions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific refer

36、ence, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. 98/13/EC: “Directive of the European Parliament and of the Council of 12 February 1998 relating to telecommunications terminal equipment and sa

37、tellite earth station equipment, including the mutual recognition of their conformity (“The Directive“)“. EN 300 607-1 (GSM 11.10-1): “Digital cellular telecommunications system (phase 2); Mobile station conformity specifications“. EN 30 1 420-1 (GSM 13.02): “European digital cellular telecommunicat

38、ions system; Attachment requirements for Global System for Mobile communications (GSM) mobile stations; Telephony“. ETS 300 500 (GSM 02.01): “Digital cellular telecommunication system (Phase 2); Principles of telecommunications services supported by a GSM Public Land Mobile Network (PLMN)“. ETS 300

39、501 (GSM 02.02): “Digital cellular telecommunications system (Phase 2); Bearer Services (BS) supported by a GSM Public Land Mobile Network (PLMN)“. ETS 300 502 (GSM 02.03): “Digital cellular telecommunications system (Phase 2); Teleservices supported by a GSM Public Land Mobile Network (PLMN)“. ETS

40、300 503 (GSM 02.04): “Digital cellular telecommunications system (Phase 2); General on supplementary services“. ETS 300 504 (GSM 02.06): “Digital cellular telecommunications system (Phase 2); Types of Mobile Stations (MS)“. ETS 300 505 (GSM 02.07): “Digital cellular telecommunications system (Phase

41、2); Mobile Station (MS) features“. ETS 300 507 (GSM 02.1 1): “Digital cellular telecommunications system (Phase 2); Service accessibility“. ETS 300 508 (GSM 02.16): “Digital cellular telecommunications system (Phase 2); International Mobile station Equipment Identities (IMEI)“. ETS 300 5 11 (GSM 02.

42、30): “Digital cellular telecommunications system (Phase 2); Man-Machine Interface (MMI) of the Mobile Station (MS)“. ETS 300 536 (GSM 03.40): “Digital cellular telecommunications system (Phase 2); Technical realization of the Short Message Service (SMS) Point-to-Point (PP)“. ETS 300 537 (GSM 03.41):

43、 “Digital cellular telecommunications system (Phase 2); Technical realization of Short Message Service Cell Broadcast (SMSCB)“. ETS 300 538 (GSM 03.45): “Digital cellular telecommunications system (Phase 2); Technical realization of facsimile group 3 transparent“. ETS 300 539 (GSM 03.46): “Digital c

44、ellular telecommunications system (Phase 2); Technical realization of facsimile group 3 non-transparent“. ETSI (GSM 13.01 version 4.1.1) 8 ETSI EN 301 41 9-1 V4.1.1 (2000-04) U71 ETS 300 55 1 (GSM 04.02): “Digital cellular telecommunications system (Phase 2); GSM Public Land Mobile Network (PLMN) ac

45、cess reference configuration“. ETS 300 557 (GSM 04.08): “Digital cellular telecommunications system (Phase 2); Mobile radio interface layer 3 specification“. ETS 300 577 (GSM 05.05): “Digital cellular telecommunications system (Phase 2); Radio transmission and reception“. ETS 300 582 (GSM 07.01): “D

46、igital cellular telecommunications system (Phase 2); General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)“. U81 U91 POI 3 Abbreviations For the purposes of the present document, the following abbreviations apply: ACK BA BC BCCH cc CCCH CFB CFNRc CFU CM CTR DRX DTE DTMF DTX FACCH I

47、 IMEI IMSI LA LAI ME MM MMI MO MOC MS MT MTC N8 OACSU PLMN RACH REJ RF RR RR RST S SABM SAP1 SDCCH ACKno wledgement BCCH Allocation Bearer Capability Broadcast Control Channel Call Control Common Control Channel Call Forwarding mobile subscriber Busy Call Forwarding MS Not Reachable Call Forwarding

48、Unconditional Connection management Common Technical Regulations Discontinuous Reception (mechanism) Data Terminal Equipment Dual Tone Multi Frequency Discontinuous Transmission (mechanism) Fast Associated Control Channel Information (frame) International Mobile station Equipment Identity Internatio

49、nal Mobile Subscriber Identity Location Area Location Area Identification Mobile Equipment Mobility Management Man Machine Interface Mobile Originated Mobile Originated Call GSM Mobile Station Mobile Terminated Mobile Terminated Call Receive sequence Number Send sequence Number Off Air Call Set Up Public Land Mobile Network Random Access Channel REJect (frame) Radio Frequency Radio Resource (management entity / connection) Receive Ready (frame) (in L2) Reset S counter Set Asynchronous Balanced Mode (frame) Service Access Point Identifier Stand-alone Dedicated Co

展开阅读全文
相关资源
猜你喜欢
  • AECMA PREN 2218-1977 Steel FE-PL52 S 980 MPa Less Than or Equal to Rm Less Than or Equal to 1180 MPa Tubes for Structures a Less Than or Equal to 4 mm d Greater Than or Equal to 5a.pdf AECMA PREN 2218-1977 Steel FE-PL52 S 980 MPa Less Than or Equal to Rm Less Than or Equal to 1180 MPa Tubes for Structures a Less Than or Equal to 4 mm d Greater Than or Equal to 5a.pdf
  • AECMA PREN 2219-1977 Steel FE-PL52 S 1030 MPa Less Than or Equal to Rm Less Than or Equal to 1230 MPa Tubes for Structures a Less Than or Equal to 2 mm d Greater Than or Equal to 5.pdf AECMA PREN 2219-1977 Steel FE-PL52 S 1030 MPa Less Than or Equal to Rm Less Than or Equal to 1230 MPa Tubes for Structures a Less Than or Equal to 2 mm d Greater Than or Equal to 5.pdf
  • AECMA PREN 2220-1977 Steel FE-PL52 S 1080 MPa Less Than or Equal to Rm Less Than or Equal to 1250 MPa Tubes for Structures 2 mm Less Than or Equal to a Less Than or Equal to 20 mm i.pdf AECMA PREN 2220-1977 Steel FE-PL52 S 1080 MPa Less Than or Equal to Rm Less Than or Equal to 1250 MPa Tubes for Structures 2 mm Less Than or Equal to a Less Than or Equal to 20 mm i.pdf
  • AECMA PREN 2221-1977 Steel FE-PL31 Hardened and Tempered Hollow Bars 3.5 mm Less Than or Equal to a Less Than or Equal to 55 mm Aerospace Series Edition 1《航空航天系列调质的钢FE-PL 31 空心棒材 a.pdf AECMA PREN 2221-1977 Steel FE-PL31 Hardened and Tempered Hollow Bars 3.5 mm Less Than or Equal to a Less Than or Equal to 55 mm Aerospace Series Edition 1《航空航天系列调质的钢FE-PL 31 空心棒材 a.pdf
  • AECMA PREN 2222-1977 Steel FE-PL31 Hardened and Tempered Hand and Die Forgings Aerospace Series Edition 1《航空航天系列调质的钢FE-PL 31压模和手工锻件》.pdf AECMA PREN 2222-1977 Steel FE-PL31 Hardened and Tempered Hand and Die Forgings Aerospace Series Edition 1《航空航天系列调质的钢FE-PL 31压模和手工锻件》.pdf
  • AECMA PREN 2223-1977 Steel FE-PL32 Hardened and Tempered Bars Aerospace Series Edition 1《航空航天系列调质的钢FE-PL 32 棒材》.pdf AECMA PREN 2223-1977 Steel FE-PL32 Hardened and Tempered Bars Aerospace Series Edition 1《航空航天系列调质的钢FE-PL 32 棒材》.pdf
  • AECMA PREN 2224-1977 Steel FE-PL32 Hardened and Tempered Hollow Bars 3.5 mm Less Than or Equal to a Less Than or Equal to 55 mm Aerospace Series Edition 1《航空航天系列调质的钢FE-PL 32 空心棒材小于.pdf AECMA PREN 2224-1977 Steel FE-PL32 Hardened and Tempered Hollow Bars 3.5 mm Less Than or Equal to a Less Than or Equal to 55 mm Aerospace Series Edition 1《航空航天系列调质的钢FE-PL 32 空心棒材小于.pdf
  • AECMA PREN 2225-1977 Steel FE-PL32 Hardened and Tempered Hand and Die Forgings Aerospace Series Edition 1《航空航天系列.调质钢FE-PM32型钢》.pdf AECMA PREN 2225-1977 Steel FE-PL32 Hardened and Tempered Hand and Die Forgings Aerospace Series Edition 1《航空航天系列.调质钢FE-PM32型钢》.pdf
  • AECMA PREN 2226-1977 Steel FE-PM43 Hardened and Tempered Hand and Die Forgings De Less Than or Eqal to 150 mm Aerospace Series Edition 1《航空航天系列.调质钢FE-PM43 型钢De小于或等于150mm》.pdf AECMA PREN 2226-1977 Steel FE-PM43 Hardened and Tempered Hand and Die Forgings De Less Than or Eqal to 150 mm Aerospace Series Edition 1《航空航天系列.调质钢FE-PM43 型钢De小于或等于150mm》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1