1、- c PLEASE NOTE This document is normally accompanied by a disk/dish wnen purchased in hardcopy. The dislddisks contain information which would be of no value as a hardcopy document. If you require a copy of the diskldisb, please use the contact information below for your request. When submitting yo
2、ur request, please have the following irzfonnation vuiizble: Your company name/account number Originating orsanisacion Document number USMCanada Enformation Handling Services E-mail Te!: 800-U$-3352 Outside USAiCanada Except the United I(ingdom) Information Handling Services E-mai Te!: i 1-303-790
3、-0600 Technic3 Tz!: (O Fax: (O United Kingdom Indexes Ltd 344) 404409, Custoinet Support 34.1) 40442 I, Ccistoiner Suppori In formation Handing Senices and Teclinicai Indexer - Cortitiziad to Service Excellence ETSI EN 301 469-6 1.1.1 (2000-10) European Standard (Telecommunications series) Digital E
4、nhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL); Part 6: Abstract Test Suite (ATS) - Data Link Control (DLC) layer - Fixed radio Termination (FT) 2 ETSI EN 301 469-6 V1.l.l (2000-1 O) The pre Reference D ENID ECT-040047-6 Keywords ATS, DECT, DPRS,
5、 ATS-GR file, ATS-MP file, data, layer 2, testing, TCN ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 0001 7 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Import
6、ant notice Individual copies of the present document can be downloaded from: http:llwww.etsi.org ent document may be made available in more than one electronic version or in print. In e of existing or perceived difference in contents between such versions, the reference version is the Portable Docum
7、ent Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the c
8、urrent status of this and other ETSI documents is available at http:llwww.etsi.orcg/lb/status/ If you find errors in the present document, send your comment to: editor et.si.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoin
9、g restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2000. All rights reserved. ETSI 3 ETSI EN 301 469-6 V1.l.l (2000-1 O) Contents Intellectual Property Rights 5 Foreword . 5 1 Scope 6 2 References 6 3 Definitions and abbreviations . 7 3.1 Definitions
10、 7 3.2 Abbreviations . 7 4 Abstract Test Method (ATM) . 7 5 6 ATS Conventions . 9 Untestable Test Purposes (TP) . 8 6.1 6.1.1 6.1.1.1 6.1.1.2 6.1.1.3 6.1.1.4 6.1.1.5 6.1.1.6 6.1.1.7 6.1.1.8 6.1.1.9 6.1.1.10 6.1.1.11 6.1.1.12 6.1.2 6.1.3 6.1.3.1 6.1.3.2 6.1.3.3 6.1.3.4 6.1.3.5 6.2 6.2.1 6.2.2 6.2.3 N
11、aming conventions . 9 Test suite type and structured type definitions 9 Test suite operations definitions 9 Test suite parameter declarations 9 Test case selection expression definitions . 9 Test suite variable declarations . 10 Test case variable declarations 10 PCO declarations . 10 Timer declarat
12、ions . 10 ASP type definitions . 11 Alias definitions 11 Dynamic part 11 Test Case (TC) identifier . 12 Test step identifier . 12 Label identifier 12 ATS abbreviations . 12 Implementation conventions 13 Declaration part 13 Constraint part 13 Declarations part . 9 Test suite constant declarations . 1
13、0 PDU type definitions . 11 Constraints part . 11 Default identifier . 12 Dynamic part 13 Annex A (normative): Abstract Test Suite (ATS) . 14 The TTCN Machine Processable form (TTCN.MP) 14 Partial PIXIT proforma for DPRS DLC FT . 15 A . 1 A.2 Annex B (normative): The TTCN Graphical form (TTCN.GR) 14
14、 B.l B . 2 B.3 B . 4 B.5 B . 6 B.6.1 Identification summary . 15 Test laboratory 15 Client identification 16 Protocol layer information 16 ATS summary 15 SUT 16 Protocol identification 16 ETSI 4 ETSI EN 301 469-6 V1.l.l (2000-1 O) B.6.2 B.6.2.1 B.6.2.2 B.6.2.3 B.6.2.4 B.6.3 B.6.3.1 B.6.3.2 B.6.3.3 B
15、.6.3.4 B.6.3.5 B.6.3.6 IUT information . 17 General configuration . 17 Parameter values . 17 Timer values . 17 Network parameter values 18 Procedural Information . 18 Class U procedural information 18 Class A procedural information 19 Paging procedural information . 20 Class O procedural information
16、 . 21 Class 1 procedural information . 21 Class 2 procedural information . 22 Annex C (normative): Protocol Conformance Test Report (PCTR) Proforma for DPRS DLC FT . 23 c.1 c.1.1 c . 1.2 Identification summary . 23 Protocol conformance test report 23 IUT identification . 23 Limits and reservation 24
17、 C . 1.3 Testing environment . 24 C . 1.4 C.1.5 Comments . 24 C.2 C.3 C.4 C.5 C.6 Test campaign repoa 26 C.7 Observations . 27 Bibliography . 28 IUT Conformance status 25 Static conformance summary . 25 Dynamic conformance summary 25 Static conformance review report . 25 History 29 ETSI 5 ETSI EN 30
18、1 469-6 V1.l.l (2000-1 O) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 3
19、 14: “Intellectual Propero Rights (IPRs); Essential, or potentially Essential, IPRs notifed to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (-). Pursuant to the ETSI IPR Policy, no investigation, including IPR s
20、earches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications ser
21、ies) has been produced by ETSI Project Digital Enhanced Cordless Telecommunications (DECT). The present document is part 6 of a multi-part deliverable covering the Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL), as identified below: Part
22、 1: Part 2: Part 3: Part 4: Part 5: Part 6: Part 7: Part 8: Part 9: “Test Suite Structure (TSS) and Test Purposes (TP) - Medium Access Control (MAC) layer“; “Abstract Test Suite (ATS) - Medium Access Control (MAC) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) - Medium Access C
23、ontrol (MAC) layer - Fixed radio Termination (FT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Data Link Control (DLC) layer“; “Abstract Test Suite (ATS) - Data Link Control (DLC) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) - Data Link Control (DLC) layer - Fixed r
24、adio Termination (FT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer“; “Abstract Test Suite (ATS) - Network (NWK) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) - Network (NWK) layer - Fixed radio Termination (FT)“. National transposition dates Date
25、of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 13 October 2000 3 1 January 200 1 3 1 July 200 1 3 1 July 200 1 ETSI 6 ETSI EN 3
26、01 469-6 V1.l.l (2000-1 O) 1 Scope The present document contains the Abstract Test Suite (ATS) specification to test the DECT Packet Radio Service (DPRS) Data Link Control (DLC) layer at the Fixed radio Termination (FT). The objective of this test specification is to provide a basis for conformance
27、tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturers DECT equipment. The IS0 standard for the methodology of conformance testing (ISO/IEC 9646-1 5 and ISO/IEC 9646-2 6) as well as the ETSI rules for conformance testing (ETS 300 406 4)
28、are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of this ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of this ATS. Annex C provides the Protocol Conformance Test Report (PCTR)
29、 Proforma of this ATS. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specifi
30、c reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. il ETSI EN 300 175-3: “Digital Enhanced Cordless Telecommunications (DE
31、CT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer“. ETSI EN 300 175-4: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer“. ETSI EN 30 1 649: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Se
32、rvices (DPRS)“. Pl 31 41 ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. ISO/IEC 9646- 1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Pa
33、rt 1: General concepts“. (See also ITU-T Recommendation X.290). ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract test suite specification“. (See also ITU-T Recommendation X.291). 51 61 ISO/IEC 9646-3: “Informati
34、on technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The tree and tabular combined notation“. (See also ITU-T Recommendation X.292). ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framewor
35、k - Part 6: Protocol profile test specification“. ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation conformance statement“. ETSI 7 ETSI EN 301 469-6 V1.l.l (2000-1 O) 3 3.1 Definitions and abbreviations Def
36、initions For the purposes of the present document, the following terms and definitions apply: a) the terms given in ISOAEC 9646-1 5; and b) the definitions given in EN 300 175-4 2. 3.2 Abbreviations For the purposes of the present document, the abbreviations defined in ISOAEC 9646-1 5, ISOAEC 9646-6
37、 SI, ISOAEC 9646-7 9 and EN 300 175-4 2 apply. In particular, the following abbreviations apply: ASP ATM ATS BI BO BV CA DLC FP FT IUT LT MAC NWK PCO PDU PICS PIXIT PMID PP PT RF RFP SAP SUT TC TDMA TP TSS TTCN UT Abstract Service Primitive Abstract Test Method Abstract Test Suite Invalid Behaviour
38、Inopportune Behaviour Valid Behaviour Capability tests Data Link Control Fixed Part Fixed radio Termination Implementation Under Test Lower Tester Medium Access Control Network Point of Control and Observation Protocol Data Unit Protocol Implementation Conformance Statement Protocol Implementation E
39、xtra Information for Testing Portable Part MAC Identity Portable Part Portable radio Termination Radio Frequency Radio Fixed Part Service Access Point System Under Test Test Case Time Division Multiple Access Test Purposes Test Suite Structure Tree and Tabular Combined Notation Upper Tester 4 Abstra
40、ct Test Method (ATM) This clause describes the ATM used for testing the DECT DLC protocol. It is the embedded variant of Remote Single (RSE) layer test method. The RSE test method has been selected, because: - - - this test method implies no specific requirements from the IUT; the Upper Service Acce
41、ss Point (USAP) of the IUT cannot be directly observed; the variety of the possible DECT implementations is a serious technical obstacle for the adoption of a different ATM; this test method places the minimum limitations in the realization of conformance testing. - ETSI 8 ETSI EN 301 469-6 V1.l.l (
42、2000-1 O) The embedded variant of the remote test method provides sufficient control of the IUT DLC behaviour, through NWK layer messages conveyed by DLC frames. Test System SUT and FBx entities I I Figure 1 : RS test Method embedded variant LT MSAP PCO Notional UT A Lower Tester (LT) is located in
43、a remote DECT test system. It controls and observes the behaviour of the IUT. MAC Service Access Point - A unique MAC SAP is defined at the DECT interface and used to exchange service data of the DLC protocol. To avoid the complexity of data fragmentation and recombination testing, the SAP is define
44、d below this functions of the DLC layer. The PCO for DLC layer testing is located on the MSAP. All test events at the PCO are specified in terms of MAC Abstract Service Primitives (ASPS) and DLC layer Protocol Data Units (PDUs). No explicit upper tester (UT) exists in the system under test. Neverthe
45、less, some network messages are sent to the SUT for the need of the Co-ordination procedures. The network layer of the SUT is used as a notional UT as defined in IS0 9646. The MAC primitives are defined according to EN 300 175-3 i clause 8 and associated subclauses. 5 Untestable Test Purposes (TP) D
46、ue to the ATM chosen for this ATS or other restrictions, the test purposes in table 1 have been identified as being in the untestable category, and therefore have not been derived into final test case: Table 1 : Untestable TP Test purpose I Reason ETSI 9 ETSI EN 301 469-6 V1.l.l (2000-1 O) ATS Conve
47、ntions This clause describes the conventions applied to define the ATS and gives the naming conventions chosen for the different elements of the ATS. The ATS conventions are intended to give a better understanding of the ATS but they describe also the conventions made for the development of the ATS,
48、 thus for any later maintenance purposes or further development of the ATS the conventions described in this clause shall be considered. The ATS conventions contain two subclauses, the naming conventions and the implementation conventions. The naming conventions describe the structure of the naming
49、of all ATS elements. The implementation conventions describe the functional structure of the ATS. To define the ATS, the guidelines of the document ETS 300 406 4 was considered. 6.1 Naming conventions 6.1.1 Declarations part This subclause describes the naming conventions chosen for the elements of the ATS declarations part. 6.1 .I .I Test suite type and structured type definitions The test suite type and test suite structured type identifiers describe the information elements, and are written in uppercase: EXAMPLE: PROTOC
