1、- c PLEASE NOTE This document is normally accompanied by a disk/dish wnen purchased in hardcopy. The dislddisks contain information which would be of no value as a hardcopy document. If you require a copy of the diskldisb, please use the contact information below for your request. When submitting yo
2、ur request, please have the following irzfonnation vuiizble: Your company name/account number Originating orsanisacion Document number USMCanada Enformation Handling Services E-mail Te!: 800-U$-3352 Outside USAiCanada Except the United I(ingdom) Information Handling Services E-mai Te!: i 1-303-790
3、-0600 Technic3 Tz!: (O Fax: (O United Kingdom Indexes Ltd 344) 404409, Custoinet Support 34.1) 40442 I, Ccistoiner Suppori In formation Handing Senices and Teclinicai Indexer - Cortitiziad to Service Excellence ETSI EN 301 469-8 1.1.1 (2000-10) European Standard (Telecommunications series) Digital E
4、nhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL); Part 8: Abstract Test Suite (ATS) - Network (NWK) layer - Portable radio Termination (PT) 2 ETSI EN 301 469-8 V1.l.l (2000-1 O) The pre Reference D ENID ECT-040047-8 Keywords ATS, DECT, DPRS, networ
5、k, data, testing ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 0001 7 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the pr
6、esent document can be downloaded from: http:llwww.etsi.org ent document may be made available in more than one electronic version or in print. In e of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute,
7、the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI d
8、ocuments is available at http:llwww.etsi.orcg/lb/status/ If you find errors in the present document, send your comment to: editor et.si.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction i
9、n all media. O European Telecommunications Standards Institute 2000. All rights reserved. ETSI 3 ETSI EN 301 469-8 V1.l.l (2000-1 O) Contents Intellectual Property Rights 5 Foreword . 5 1 Scope 6 2 References 6 3 Definitions and abbreviations . 7 3.1 Definitions 7 3.2 Abbreviations . 7 4 Abstract Te
10、st Method (ATM) . 8 5 Untestable Test Purposes (TP) . 9 6 ATS Conventions . 9 6.1 6.1.1 6.1.1.1 6.1.1.2 6.1.1.3 6.1.1.4 6.1.1.5 6.1.1.6 6.1.1.7 6.1.1.8 6.1.1.9 6.1.1.10 6.1.1.11 6.1.1.12 6.1.2 6.1.3 6.1.3.1 6.1.3.2 6.1.3.3 6.1.3.4 6.1.3.5 6.2 6.2.1 6.2.2 6.2.3 Naming conventions . 9 Declarations par
11、t . 9 Test suite type and structured type definitions 9 Test suite operations definitions 10 Test suite parameter declarations 10 Test case selection expression definitions . 10 Test suite constant declarations . 10 Test suite variable declarations . 10 Test case variable declarations 10 PCO declara
12、tions . 11 Timer declarations . 11 ASP type definitions . 11 PDU type definitions . 11 Alias definitions 11 Constraints part . 12 Dynamic part 14 Test Case (TC) identifier . 14 Test step identifier . 14 Default identifier . 14 Label identifier 15 ATS abbreviations . 15 Implementation conventions 15
13、Declaration part 15 Constraint part 16 Dynamic part 16 B.l B . 2 B.3 B . 4 B.5 B . 6 B.6.1 Annex A (normative): A . 1 A.2 Annex B (normative): Abstract Test Suite (ATS) . 17 The TTCN Graphical form (TTCN.GR) 17 The TTCN Machine Processable form (TTCN.MP) 17 Partial PIXIT proforma for DPRS NWK PT 18
14、Identification summary . 18 ATS summary 18 Test laboratory 18 Client identification 19 SUT 19 Protocol layer information 19 Protocol identification 19 ETSI 4 ETSI EN 301 469-8 V1.l.l (2000-1 O) B.6.2 IUT information . 20 B.6.2.1 General configuration . 20 Annex C (normative): Protocol Conformance Te
15、st Report (PCTR) Proforma for DPRS NWK PT . 25 C.l Identification summary . 25 C.l.l Protocol conformance test report 25 C . 1.2 IUT identification . 25 C . 1.3 Testing environment . 25 C . 1.4 Limits and reservation 26 C.1.5 Comments . 26 C.2 IUT Conformance status 26 C.3 C.4 C.5 C.6 Static conform
16、ance summary . 26 Static conformance review report . 27 Test campaign repoa 27 C.7 Observations . 30 Bibliography . 31 Dynamic conformance summary 26 History 32 ETSI 5 ETSI EN 301 469-8 V1.l.l (2000-1 O) Intellectual Property Rights IPRs essential or potentially essential to the present document may
17、 have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 3 14: “Intellectual Propero Rights (IPRs); Essential, or potentially Essential, IPRs notifed to ETSI in respect of ETSI sta
18、ndards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (-). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI
19、SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced Cordless Telecommunications (DECT). The present document is part 8
20、 of a multi-part deliverable covering the Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL), as identified below: Part 1: Part 2: Part 3: Part 4: Part 5: Part 6: Part 7: Part 8: Part 9: “Test Suite Structure (TSS) and Test Purposes (TP) - M
21、edium Access Control (MAC) layer“; “Abstract Test Suite (ATS) - Medium Access Control (MAC) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) - Medium Access Control (MAC) layer - Fixed radio Termination (FT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Data Link Control
22、 (DLC) layer“; “Abstract Test Suite (ATS) - Data Link Control (DLC) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) - Data Link Control (DLC) layer - Fixed radio Termination (FT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer“; “Abstract Test Suite (A
23、TS) - Network (NWK) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) - Network (NWK) layer - Fixed radio Termination (FT)“. National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard
24、or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 13 October 2000 3 1 January 200 1 3 1 July 200 1 3 1 July 200 1 ETSI 6 ETSI EN 301 469-8 V1.l.l (2000-1 O) 1 Scope The present document contains the Abstract Test Suite (ATS) specification to test the D
25、ECT Packet Radio Service (DPRS) Network (NWK) layer at the Portable radio Termination (PT). The objective of this test specification is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturers DECT equipm
26、ent. The IS0 standard for the methodology of conformance testing (ISO/IEC 9646-1 SI and ISO/IEC 9646-2 9) as well as the ETSI rules for conformance testing (ETS 300 406 7) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of this ATS. A
27、nnex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of this ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Proforma of this ATS. 2 References The following documents contain provisions which, through reference in this text, constitute
28、 provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific referen
29、ce to an ETS shall also be taken to refer to later versions published as an EN with the same number. il ETSI EN 300 175- 1: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview“. ETSI EN 300 175-4: “Digital Enhanced Cordless Telecommunications (DECT); Common
30、Interface (CI); Part 4: Data Link Control (DLC) layer“. ETSI EN 300 175-5: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer“. Pl 31 41 ETSI EN 300 175-6: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Ident
31、ities and addressing“. ETSI EN 300 175-7: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features“. ETSI EN 30 1 649: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Services (DPRS)“. 51 61 71 ETSI ETS 300 406: “Methods for Testi
32、ng and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. ISO/IEC 9646- 1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. (See also CCITT Recommendation X.290
33、). ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract test suite specification“. (See also CCITT Recommendation X.29 1). SI Pl ETSI 7 ETSI EN 301 469-8 V1.l.l (2000-1 O) u01 ISO/IEC 9646-3: “Information technology
34、 - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The tree and tabular combined notation“. (See also CCITT Recommendation X.292). ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: P
35、rotocol profile test specification“. ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation conformance statement“. ETSI EN 300 444: “Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (
36、GAP)“. i 11 I21 i131 3 3.1 Definitions and abbreviations Definitions For the purposes of the present document, the following terms and definitions apply: a) the terms given in ISO/IEC 9646-1 SI, ISO/IEC 9646-2 91; and b) the definitions given in EN 300 175-1 i, EN 300 175-5 3, EN 300 175-6 4 and EN
37、300 175-7 51. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 SI, ISO/IEC 9646-6 i ISO/IEC 9646-7 12 and EN 300 175-5 3 apply. In particular, the following abbreviations apply: AC AR ASP ATM ATS AU BI BO BV CA cc CH DLC FP FT ID IPEI IPUI IUT KA
38、LO LT MAC MM NWK PARK PCO PDU PHL PICS PIXIT I, Authentication Code Access Rights Abstract Service Primitive Abstract Test Method Abstract Test Suite Authentication Invalid Behaviour Inopportune Behaviour Valid Behaviour Capability tests Call Control Ciphering Data Link Control Fixed Part Fixed radi
39、o Termination Identification International Portable Equipment Identity International Portable User Identity Implementation Under Test Key Allocation Location Lower Tester Medium Access Control Mobility Management Network Portable Access Rights Key Point of Control and Observation Protocol Data Unit
40、Physical Layer Protocol Implementation Conformance Statement Protocol Implementation Extra Information for Testing ETSI 8 ETSI EN 301 469-8 V1.l.l (2000-1 O) PP PT REP RF RFP RPN SAP SUT TC TP TSS TTCN UT Portable Part Portable radio Termination Radio End Point Radio Frequency Radio Fixed Part Radio
41、 Fixed Part Number Service Access Point System Under Test Test Case Test Purposes Test Suite Structure Tree and Tabular Combined Notation Upper Tester 4 Abstract Test Method (ATM) This clause describes the ATM, the Point of Control and Observation (PCO) used to test the NWK layer of the PT. Test Sys
42、tem DLC- 4 Pr i mit ives VK-PC SUT Portable Termination ! ! ! ! ! ! ! ! i Upper i i ! Layers i ! ! ! ! ! DECT MAC layer 1 Figure 1 : RS test Method embedded variant ETSI 9 ETSI EN 301 469-8 V1.l.l (2000-1 O) LT: DSAP: PCO: Notional UT a lower tester (LT) is located in a remote DECT test system. It c
43、ontrols and observes the behaviour of the Implementation Under Test (IUT). a unique Data Link Control (DLC) SAP is defined at the DECT interface and used to exchange service data of the NWK protocol. the PCO for Network Layer testing is located on the DSAP. All test events at the PCO are specified i
44、n terms of DLC Abstract Service Primitives (ASP) and NWK Protocol Data Units (PDUs). no explicit upper tester (UT) exists in the system under test. However, the System Under Test (SUT) needs to carry out some UL functions to achieve some effects of test Co-ordination procedures. Designing ATS, the c
45、apability of the Interworking Unit (IWU), such as PSTN, ISDN or GSM IWU might be taken into account. An example of such controls could be to provoke restarting of the IUT through the Q interface. The DLC primitives are defined according to EN 300 175-4 2, subclauses 8.3.2 (S-SAP primitives) and 8.3.
46、3 (B-SAP primitives). 5 Untestable Test Purposes (TP) Due to the ATMs chosen for this ATS or other restrictions, the test purposes in table 1 have been identified as being in the untestable category, and therefore have not been derived into final test case: Table 1 : Untestable TP Test purpose I Rea
47、son I 6 ATS Conventions This clause describes the conventions applied to define the ATS and gives the naming conventions chosen for the different elements of the ATS. The ATS conventions are intended to give a better understanding of the ATS but they describe also the conventions made for the develo
48、pment of the ATS, thus for any later maintenance purposes or further development of the ATS the conventions described in this clause shall be considered. The ATS conventions contain two subclauses, the naming conventions and the implementation conventions. The naming conventions describe the structu
49、re of the naming of all ATS elements. The implementation conventions describe the functional structure of the ATS. To define the ATS, the guidelines of ETS 300 406 7 were considered. 6.1 Naming conventions 6.1.1 Declarations part This subclause describes the naming conventions chosen for the elements of the ATS declarations part. 6.1 .I .I Test suite type and structured type definitions The test suite type and test suite structured type identifiers describe the information elements, and are written in uppercase: EX
