1、- c PLEASE NOTE This document is normally accompanied by a disk/dish wnen purchased in hardcopy. The dislddisks contain information which would be of no value as a hardcopy document. If you require a copy of the diskldisb, please use the contact information below for your request. When submitting yo
2、ur request, please have the following irzfonnation vuiizble: Your company name/account number Originating orsanisacion Document number USMCanada Enformation Handling Services E-mail Te!: 800-U$-3352 Outside USAiCanada Except the United I(ingdom) Information Handling Services E-mai Te!: i 1-303-790
3、-0600 Technic3 Tz!: (O Fax: (O United Kingdom Indexes Ltd 344) 404409, Custoinet Support 34.1) 40442 I, Ccistoiner Suppori In formation Handing Senices and Teclinicai Indexer - Cortitiziad to Service Excellence ETSI EN 301 469-9 1.1.1 (2000-10) European Standard (Telecommunications series) Digital E
4、nhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL); Part 9: Abstract Test Suite (ATS) - Network (NWK) layer - Fixed radio Termination (FT) 2 ETSI EN 301 469-9 V1.l.l (2000-1 O) The pre Reference D ENID ECT-040047-9 Keywords ATS, data, DECT, DPRS, net
5、work, ATS-GR file, ATS-MP file, testing ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 0001 7 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Indi
6、vidual copies of the present document can be downloaded from: http:llwww.etsi.org ent document may be made available in more than one electronic version or in print. In e of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF
7、). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status o
8、f this and other ETSI documents is available at http:llwww.etsi.orcg/lb/status/ If you find errors in the present document, send your comment to: editor et.si.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction e
9、xtend to reproduction in all media. O European Telecommunications Standards Institute 2000. All rights reserved. ETSI 3 ETSI EN 301 469-9 V1.l.l (2000-1 O) Contents Intellectual Property Rights 5 Foreword . 5 1 Scope 6 2 References 6 3 Definitions and abbreviations . 7 3.1 Definitions 7 3.2 Abbrevia
10、tions . 7 4 Abstract Test Method (ATM) . 8 5 Untestable Test Purposes (TP) . 9 6 ATS Conventions . 9 6.1 6.1.1 6.1.1.1 6.1.1.2 6.1.1.3 6.1.1.4 6.1.1.5 6.1.1.6 6.1.1.7 6.1.1.8 6.1.1.9 6.1.1.10 6.1.1.11 6.1.1.12 6.1.2 6.1.3 6.1.3.1 6.1.3.2 6.1.3.3 6.1.3.4 6.1.3.5 6.2 6.2.1 6.2.2 6.2.3 Naming conventio
11、ns . 9 Declarations part . 9 Test suite type and structured type definitions 9 Test suite operations definitions 10 Test suite parameter declarations 10 Test case selection expression definitions . 10 Test suite constant declarations . 10 Test suite variable declarations . 10 Test case variable decl
12、arations 10 PCO declarations . 11 Timer declarations . 11 ASP type definitions . 11 PDU type definitions . 11 Alias definitions 11 Constraints part . 12 Dynamic part 13 Test Case (TC) identifier . 13 Test step identifier . 13 Default identifier . 14 Label identifier 14 ATS abbreviations . 14 Impleme
13、ntation conventions 14 Declaration part 14 Constraint part 15 Dynamic part 15 B.l B . 2 B.3 B . 4 B.5 B . 6 B.6.1 Annex A (normative): A . 1 A.2 Annex B (normative): Abstract Test Suite (ATS) . 16 The TTCN Graphical form (TTCN.GR) 16 The TTCN Machine Processable form (TTCN.MP) 16 Partial PIXIT profo
14、rma for DPRS NWK FT 17 Identification summary . 17 ATS summary 17 Test laboratory 17 Client identification 18 SUT 18 Protocol layer information 18 Protocol identification 18 ETSI 4 ETSI EN 301 469-9 V1.l.l (2000-1 O) B.6.2 IUT information . 19 B.6.2.1 General configuration . 19 Annex C (normative):
15、Protocol Conformance Test Report (PCTR) Proforma for DPRS NWK FT . 24 C.l Identification summary . 24 C.l.l Protocol conformance test report 24 C . 1.2 IUT identification . 24 C . 1.3 Testing environment . 25 C . 1.4 Limits and reservation 25 C.1.5 Comments . 25 C.2 IUT Conformance status 25 C.3 C.4
16、 C.5 C.6 Static conformance summary . 26 Static conformance review report . 26 Test campaign repoa 27 C.7 Observations . 29 Bibliography . 30 History 31 Dynamic conformance summary 26 ETSI 5 ETSI EN 301 469-9 V1.l.l (2000-1 O) Intellectual Property Rights IPRs essential or potentially essential to t
17、he present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 3 14: “Intellectual Propero Rights (IPRs); Essential, or potentially Essential, IPRs notifed to ETSI
18、 in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (-). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs
19、not referenced in ETSI SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced Cordless Telecommunications (DECT). The pre
20、sent document is part 9 of a multi-part deliverable covering the Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL), as identified below: Part 1: Part 2: Part 3: Part 4: Part 5: Part 6: Part 7: Part 8: Part 9: “Test Suite Structure (TSS) and
21、 Test Purposes (TP) - Medium Access Control (MAC) layer“; “Abstract Test Suite (ATS) - Medium Access Control (MAC) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) - Medium Access Control (MAC) layer - Fixed radio Termination (FT)“; “Test Suite Structure (TSS) and Test Purposes (
22、TP) - Data Link Control (DLC) layer“; “Abstract Test Suite (ATS) - Data Link Control (DLC) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) - Data Link Control (DLC) layer - Fixed radio Termination (FT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer“;
23、“Abstract Test Suite (ATS) - Network (NWK) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) - Network (NWK) layer - Fixed radio Termination (FT)“. National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of
24、 new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 13 October 2000 3 1 January 200 1 3 1 July 200 1 3 1 July 200 1 ETSI 6 ETSI EN 301 469-9 V1.l.l (2000-1 O) 1 Scope The present document contains the Abstract Test Suite (ATS) spec
25、ification to test the DECT Packet Radio Service (DPRS) Network (NWK) layer at the Fixed radio Termination (FT). The objective of this test specification is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manuf
26、acturers DECT equipment. The IS0 standard for the methodology of conformance testing (ISO/IEC 9646-1 SI and ISO/IEC 9646-2 9) as well as the ETSI rules for conformance testing (ETS 300 406 7) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN)
27、 part of this ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of this ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Proforma of this ATS. 2 References The following documents contain provisions which, through reference in t
28、his text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A
29、non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. il ETSI EN 300 175- 1: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview“. ETSI EN 300 175-4: “Digital Enhanced Cordless Telecommunicat
30、ions (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer“. ETSI EN 300 175-5: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer“. Pl 31 41 ETSI EN 300 175-6: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface
31、 (CI); Part 6: Identities and addressing“. ETSI EN 300 175-7: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features“. ETSI EN 30 1 649: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Services (DPRS)“. 51 61 71 ETSI ETS 300 406
32、: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. SI ISO/IEC 9646- 1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. (See also ITU
33、-T Recommendation X.290 (1991). Pl ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract test suite specification“. (See also ITU-T Recommendation X.29 1). ETSI 7 ETSI EN 301 469-9 V1.l.l (2000-1 O) IO1 ISOIIEC 9646-
34、3: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The tree and tabular combined notation“. (See also ITU-T Recommendation X.292). i 11 ISOIIEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing method
35、ology and framework - Part 6: Protocol profile test specification“. ISOIIEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation conformance statement“. 121 3 3.1 Definitions and abbreviations Definitions For the purp
36、oses of the present document, the following terms and definitions apply: a) the terms given in ISOIIEC 9646-1 SI, ISOIIEC 9646-2 9; and b) the definitions given in EN 300 175-1 i, EN 300 175-5 31, EN 300 175-6 4 and EN 300 175-7 51. 3.2 Abbreviations For the purposes of the present document, the abb
37、reviations given in ISOIIEC 9646-1 SI, ISOIIEC 9646-6 i 11, ISOIIEC 9646-7 12 and EN 300 175-5 3 apply. In particular, the following abbreviations apply: AC AR ASP ATM ATS AU BI BO BV CA cc CH DLC FP FT ID IPEI IPUI IUT IWU KA LO LT MAC MM NWK PARK PCO PDU PICS PIXIT PP PT RF Authentication Code Acc
38、ess Rights Abstract Service Primitive Abstract Test Method Abstract Test Suite Authentication Invalid Behaviour Inopportune Behaviour Valid Behaviour Capability tests Call Control Ciphering Data Link Control Fixed Part Fixed radio Termination Identification International Portable Equipment Identity
39、International Portable User Identity Implementation Under Test Interworking Unit Key Allocation Location Lower Tester Medium Access Control Mobility Management Network Portable Access Rights Key Point of Control and Observation Protocol Data Unit Protocol Implementation Conformance Statement Protoco
40、l Implementation Extra Information for Testing Portable Part Portable radio Termination Radio Frequency ETSI 8 ETSI EN 301 469-9 V1.l.l (2000-1 O) RPN SAP SUT TC TP TSS TTCN UAK UT Radio fixed Part Number Service Access Point System Under Test Test Case Test Purposes Test Suite Structure Tree and Ta
41、bular Combined Notation User Authentication Key Upper Tester 4 Abstract Test Method (ATM) This clause describes the ATM, the Point of Control and Observation (PCO) used to test the NWK layer of the FT. Test System WK-PU SUT Fixed termination . I ! ! ! ! ! i Upper ! i i Layers i ! ! ! I DECT PHL and
42、radio communication Figure 1 : RS test Method embedded variant ETSI 9 ETSI EN 301 469-9 V1.l.l (2000-1 O) LT: DSAP: PCO: Notional UT: a Lower Tester (LT) is located in a remote DECT test system. It controls and observes the behaviour of the IUT. a unique Data Link Control (DLC) SAP is defined at the
43、 DECT interface and used to exchange service data of the NWK protocol. the PCO for Network Layer testing is located on the DSAP. All test events at the PCO are specified in terms of DLC Abstract Service Primitives (ASP) and NWK Protocol Data Units (PDUs). no explicit Upper Tester (UT) exists in the
44、test system. However, the System Under Test (SUT) needs to carry out some UT functions to achieve some effects of test Co-ordination procedures. Designing ATS, the capability of the Interworking Unit (IWU), such as PSTN, ISDN or GSM IWU might be taken into account. An example of such controls could
45、be to provoke restarting of the IUT through the Q interface. The DLC primitives are defined according to EN 300 175-4 2, subclauses 8.3.2 (S-SAP primitives) and 8.3.3 (B-SAP primitives). 5 Untestable Test Purposes (TP) Due to the ATMs chosen for this ATS or other restrictions, the test purposes in t
46、able 1 have been identified as being in the untestable category, and therefore have not been derived into final test case: Table 1 : Untestable TP Test purpose I Reason I 6 ATS Conventions This clause describes the conventions applied to define the ATS and gives the naming conventions chosen for the
47、 different elements of the ATS. The ATS conventions are intended to give a better understanding of the ATS but they describe also the conventions made for the development of the ATS, thus for any later maintenance purposes or further development of the ATS the conventions described in this clause sh
48、all be considered. The ATS conventions contain two subclauses, the naming conventions and the implementation conventions. The naming conventions describe the structure of the naming of all ATS elements. The implementation conventions describe the functional structure of the ATS. To define the ATS, t
49、he guidelines of the document ETS 300 406 7 was considered. 6.1 Naming conventions 6.1.1 Declarations part This subclause describes the naming conventions chosen for the elements of the ATS declarations part. 6.1 .I .I Test suite type and structured type definitions The test suite type and test suite structured type identifiers describe the information elements, and are written in uppercase: EXAMPLE: PROTOCOL-DISCRIMINATOR simple type. FILLSTRING structured type ETSI 10 ETSI EN 301 469-9 V1.l.l (2000-1 O) 6.1 .I .
