1、 ETSI EN 301 489-17 V3.1.1 (2017-02) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU HARMONISED EUROP
2、EAN STANDARD ETSI ETSI EN 301 489-17 V3.1.1 (2017-02)2 Reference REN/ERM-EMC-335 Keywords EMC, harmonised standard, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucra
3、tif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the pr
4、esent document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network
5、drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in
6、 the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as
7、 authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTT
8、M, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM As
9、sociation. ETSI ETSI EN 301 489-17 V3.1.1 (2017-02)3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 8g
10、34 Test conditions . 8g34.1 General . 8g34.2 Arrangements for test signals . 8g34.2.0 General 8g34.2.1 Arrangements for test signals at the input of transmitters . 8g34.2.2 Arrangements for test signals at the output of transmitters . 9g34.2.3 Arrangements for test signals at the input of receivers
11、. 9g34.2.4 Arrangements for test signals at the output of receivers . 9g34.2.5 Arrangements for testing transmitter and receiver together (as a system) 9g34.2.6 Equipment with an external antenna connector 9g34.2.7 Equipment without an external antenna connector (integral antenna) 9g34.2.8 Equipment
12、 with more than one antenna 10g34.3 Exclusion bands 10g34.4 Narrow band responses on receivers or receivers which are part of transceivers . 10g34.5 Normal test modulation 10g35 Performance assessment . 11g35.1 General . 11g35.2 Arrangements for the assessment of host dependant equipment and plug-in
13、 cards 11g35.2.0 Introduction. 11g35.2.1 Alternative A: composite equipment 11g35.2.2 Alternative B: use of a test jig or host . 11g35.3 Assessment procedures . 12g35.4 Ancillary equipment . 12g35.5 Equipment classification 12g36 Performance criteria . 12g36.1 General performance criteria 12g36.2 Pe
14、rformance table . 13g36.3 Performance criteria for Continuous phenomena applied to Transmitters (CT) 13g36.4 Performance criteria for Transient phenomena applied to Transmitters (TT) 14g36.5 Performance criteria for Continuous phenomena applied to Receivers (CR) . 14g36.6 Performance criteria for Tr
15、ansient phenomena applied to Receivers (TR) 14g37 Applicability overview . 14g37.1 Emission . 14g37.1.1 General 14g37.1.2 Special conditions . 14g37.2 Immunity 14g37.2.1 General 14g37.2.2 Special conditions . 15g3Annex A (informative): Relationship between the present document and the essential requ
16、irements of Directive 2014/53/EU . 16g3Annex B (informative): Examples of radio equipment in the scope of the present document 18g3ETSI ETSI EN 301 489-17 V3.1.1 (2017-02)4 B.1 Introduction 18g3B.2 Data transmission systems operating in the 2,4 GHz ISM band and using wide band modulation techniques
17、. 18g3B.3 5 GHz high performance RLAN systems . 18g3B.4 Broadband data transmitting systems operating in the band 5 725 MHz to 5 875 MHz 18g3B.5 Broadband data transmitting/BWA Terminal Stations . 18g3B.6 Multi-Gigabit Wireless Systems (MGWS) 18g3Annex C (informative): Change History 19g3History 20g
18、3ETSI ETSI EN 301 489-17 V3.1.1 (2017-02)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
19、 in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Poli
20、cy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harm
21、onised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.12 to provide one voluntary means of conforming to the
22、 essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that D
23、irective, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present docume
24、nt is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 1. National transposition dates Date of adoption of this EN: 30 January 2017 Date of latest announcement of this EN (doa): 30 April 2017 Date of latest publication of new National Standard or endorsem
25、ent of this EN (dop/e): 31 October 2017 Date of withdrawal of any conflicting National Standard (dow): 31 October 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as desc
26、ribed in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 301 489-17 V3.1.1 (2017-02)6 1 Scope The present document, together with ETSI EN 301 489-1 1, s
27、pecifies technical characteristics and methods of measurements for Broadband Data Transmission System equipment, as detailed in annex B. Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such te
28、chnical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for wideband data communication systems. In case of differences (for instance
29、 concerning special conditions, definitions, abbreviations) between the present document and ETSI EN 301 489-1 1, the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN
30、301 489-1 1, except for any special conditions included in the present document. The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU i.1 under the conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified
31、by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid
32、at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 301 489-1 (V2.1.1) (02-2017): “ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Co
33、mmon technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU“. 2.2 Informative references References are either specific (identified by date of publication and/or edi
34、tion number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publica
35、tion, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of the European Parliament and of the council of 16 April
36、 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. i.2 Void. ETSI ETSI EN 301 489-17 V3.1.1 (2017-02)7 i.3 ETSI EN 301 893: “Broadband Radio Access Networks (BRAN); 5 GHz high performance RL
37、AN; Harmonized EN covering the essential requirements of article 3.2 of the R 5,8 GHz fixed broadband data transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the R Part 2: TDD User Equipment Stations; Harmonized EN covering the essential requirements of article
38、 3.2 of the R Multiple-Gigabit WAS/RLAN equipment operating in the 60 GHz band; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU“. i.7 ETSI EN 302 623: “Broadband Wireless Access Systems (BWA) in the 3 400 MHz to 3 800 MHz frequency band; Mobile Term
39、inal Stations; Harmonized EN covering the essential requirements of article 3.2 of the R Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU“. i.9 Void.
40、 i.10 ETSI EN 301 908-19: “IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 19: OFDMA TDD WMAN (Mobile WiMAXTM) TDD User Equipment (UE)“. i.11 ETSI EN 301 908-21: “IMT cellular networks; Harmonised Standard covering the e
41、ssential requirements of article 3.2 of the Directive 2014/53/EU; Part 21: OFDMA TDD WMAN (Mobile WiMAXTM) FDD User Equipment (UE)“. i.12 Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to
42、 the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI EN 301 4
43、89-1 1 and the following apply: Equipment Under Test (EUT): equipment subject to the performance requirements of the present document fixed station: equipment intended for use in a fixed location and fitted with one or more antennas NOTE: The equipment may be fitted with either antenna socket(s) or
44、integral antenna(s) or both. hand-portable station: equipment normally used on a stand-alone basis and to be carried by a person NOTE: The equipment may be fitted with one or more antennas. The equipment may be fitted with either antenna socket(s) or integral antenna(s) or both. host: any equipment
45、which has complete user functionality when not connected to the radio equipment part and to which the radio equipment part provides additional functionality and to which connection is necessary for the radio equipment part to offer functionality ETSI ETSI EN 301 489-17 V3.1.1 (2017-02)8 plug-in radi
46、o device: equipment, including slide-in radio cards, intended to be used with or within a variety of host systems, using their control functions and power supply stand-alone radio equipment: equipment that is intended primarily as communications equipment and that is normally used on a stand-alone b
47、asis 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: AC Alternating Current ACK ACKnowledgementARQ Automatic Retransmission reQuest BRAN Broadband Radio Access Networks BWA Broadband Wireless Access CR Continuous phenomena applied to Receivers CT Contin
48、uous phenomena applied to Transmitters DC Direct Current EMC ElectroMagnetic Compatibility ERM Electromagnetic compatibility and Radio Matters EUT Equipment Under Test ISM Industrial, Scientific and Medical MGWS Multi-Gigabit Wireless SystemsMUS Maximum Usable Sensitivity NACK Not ACKnowledgement RF
49、 Radio Frequency RLAN Radio Local Area Network TR Transient phenomena applied to Receivers TT Transient phenomena applied to Transmitters 4 Test conditions 4.1 General For the purposes of the present document, the test conditions of ETSI EN 301 489-1 1, clause 4, shall apply as appropriate. Further product related test conditions for wideband data communications systems are specified in clauses 4.2 to 4.5. The radio equipment may take forms which may require special software and/or test fixtures. Equipment which requires connection to a ho
