ETSI EN 301 840-2-2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) Digital Radio Microphones Operating in the CEPT Harmonized Band 1 785 MHz to 1 800 MHz Part 2 _1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 61191-2-2013 en Printed board assemblies - Part 2 Sectional specification - Requirements for surface mount soldered assemblies.pdf

EN 61191-2-2017 en Printed board assemblies - Part 2 Sectional specification - Requirements for surface mount soldered assemblies.pdf

EN 61191-3-1998 en Printed Board Assemblies Part 3 Sectional Specification Requirements for Through-Hole Mount Soldered Assemblies《印制板组装 第3部分 分规范 通孔安装焊接组装的要求 IEC 61191-3 1998》.pdf

EN 61191-3-2017 en Printed board assemblies - Part 3 Sectional specification - Requirements for through-hole mount soldered assemblies.pdf

EN 61191-4-1998 en Printed Board Assemblies Part 4 Sectional Specification Requirements for Terminal Soldered Assemblies《印制板组装 第4部分 分规范 引出端焊接组装的要求 IEC 61191-4 1998》.pdf

EN 61191-4-2017 en Printed board assemblies - Part 4 Sectional specification - Requirements for terminal soldered assemblies.pdf

EN 61191-6-2010 en Printed board assemblies - Part 6 Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method《印刷电路板组件 第6部分 球栅阵列和网格阵列的焊接接头内空隙及测量方法用评定标准.pdf

EN 61192-1-2003 en Workmanship requirements for soldered electronic assemblies Part 1 General《钎焊电子组件的工艺要求 第1部分 总则 IEC 61192-1 2003》.pdf

EN 61192-2-2003 en Workmanship requirements for soldered electronic assemblies Part 2 Surface-mount assemblies《钎焊电子组件的工艺要求 第2部分 表面安装组件 IEC 61192 2003》.pdf