1、 ETSI EN 301 907 V1.1.1 (2004-01)European Standard (Telecommunications series) Corporate telecommunication Networks (CN);Signalling interworking between QSIG and H.323;Call transfer supplementary serviceISO/IEC 21410 (2001), modifiedETSI ETSI EN 301 907 V1.1.1 (2004-01) 2 Reference DEN/ECMA-00274 Ke
2、ywords endorsement, H.323, network, PISN, QSIG, supplementary service ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 78
3、03/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference ver
4、sion is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of st
5、atus. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permis
6、sion. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Ma
7、rks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 301 907 V1.1.1 (2004-01) 3 Intellectual Property Rights IPRs essential or potentially essential to the
8、 present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI
9、in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as
10、 to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA on behalf of its members and those o
11、f the European Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrated Services Digital Network (ISDN) concepts as develope
12、d by ITU-T and conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document defines the signalling protocol interworking for call transfer supplementary services between a Private Integrated Services Network (PISN) and a packet-based priva
13、te telecommunications network based on the Internet Protocol (IP). It is further assumed that the protocol for the PISN part is that defined for the Q reference point (QSIG) and that the protocols for the IP-based network are based on ITU-T Recommendation H.323. The present document endorses an Inte
14、rnational Standard, ISO/IEC 21410. National transposition dates Date of adoption of this EN: 19 December 2003 Date of latest announcement of this EN (doa): 31 March 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 September 2004 Date of withdrawal of any
15、 conflicting National Standard (dow): 30 September 2004 Endorsement notice The elements of International Standard ISO/IEC 21410 (2001) apply, with the following modifications. ETSI ETSI EN 301 907 V1.1.1 (2004-01) 4 Clause 3 Replace the first paragraph by: The following documents contain provisions
16、which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference,
17、 the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. Insert the following normative references at the end of clause 3: 12 ETSI EN 300 172: “Private Integrated Services Network (PISN)
18、 Inter-exchange signalling protocol; Circuit-mode basic services ISO/IEC 11572 (2000), modified“. 13 ETSI ETS 300 475-1: “Private Telecommunication Network (PTN); Reference configuration; Part 1: Reference configuration for PTN eXchanges (PTNXs) ISO/IEC 11579-1 (1994), modified“. 14 ETSI EN 300 239
19、 “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Generic functional protocol for the support of supplementary services ISO/IEC 11582 (2002) modified“. 15 ETSI EN 300 261: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Call transfer
20、supplementary service ISO/IEC 13869 (2003), modified“. 16 ETSI EN 301 919: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Single step call transfer supplementary service ISO/IEC 19460 (2003), modified“. 17 ETSI TS 101 905: “Corporate Telecommunication Networks (CN);
21、 Signalling interworking between QSIG and H.323; Generic functional protocol for the support of supplementary services“. Throughout the text of ISO/IEC 21410 Replace references as shown in the table below. Reference in ISO/IEC 21410 Modified reference ISO/IEC 11572 EN 300 172 12 ISO/IEC 11579-1 ETS
22、300 475-1 13 ISO/IEC 11582 EN 300 239 14 ISO/IEC 13869 EN 300 261 15 ISO/IEC 19460 EN 301 919 16 ISO/IEC 21409 TS 101 905 17 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 301 907 V1.1.1 (2004-01) 5 History Document history V1.1.1 August 2003 One-step Approval Procedure OAP 20031219: 2003-08-20 to 2003-12-19 V1.1.1 January 2004 Publication
