1、 ETSI EN 301 908-5 V5.2.1 (2011-09) IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R Part 5: CDMA Multi-Carrier (cdma2000) Base Stations (BS) Harmonized European Standard ETSI ETSI EN 301 908-5 V5.2.1 (2011-09) 2Reference REN/MSG-TFES-007-5 Keywords 3G
2、, 3GPP2, cdma2000, cellular, digital, IMT-2000, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse
3、 (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the ref
4、erence version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or ch
5、ange of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyrig
6、ht Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Mar
7、ks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 908-5 V5.2.1 (2011-09) 3C
8、ontents Intellectual Property Rights 6g3Foreword . 6g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 9g32.2 Informative references 9g33 Definitions, symbols and abbreviations . 10g33.1 Definitions 10g33.2 Symbols 19g33.3 Abbreviations . 22g34 Technical requirements specificati
9、ons . 23g34.1 Environmental profile . 23g34.2 Conformance requirements 23g34.2.1 Introduction. 23g34.2.2 Transmitter conducted spurious emissions . 24g34.2.2.1 Definition 24g34.2.2.2 Limits 24g34.2.2.2.1 Macro cell base station 24g34.2.2.2.2 Pico cell base station and femto cell 26g34.2.2.3 Conforma
10、nce . 28g34.2.3 Maximum output power 28g34.2.3.1 Definition 28g34.2.3.2 Limits 28g34.2.3.2.1 Base stations operating in Type 1 cdma2000 systems . 28g34.2.3.2.2 Base stations operating in Type 2 cdma2000 systems . 28g34.2.3.3 Conformance . 29g34.2.4 Inter-Base Station transmitter intermodulation . 29
11、g34.2.4.1 Definition 29g34.2.4.2 Limits 29g34.2.4.3 Conformance . 29g34.2.5 Receiver conducted spurious emissions 30g34.2.5.1 Definition 30g34.2.5.2 Limits 30g34.2.5.3 Conformance . 30g34.2.6 Receiver blocking characteristics . 30g34.2.6.1 Definition 30g34.2.6.2 Limits 30g34.2.6.2.1 Base stations op
12、erating in Type 1 cdma2000 systems . 30g34.2.6.2.2 Base stations operating in Type 2 cdma2000 systems . 30g34.2.6.3 Conformance . 30g34.2.7 Intermodulation spurious response attenuation . 31g34.2.7.1 Definition 31g34.2.7.2 Limits 31g34.2.7.2.1 Base stations operating in Type 1 cdma2000 systems . 31g
13、34.2.7.2.2 Base stations operating in Type 2 cdma2000 systems . 31g34.2.7.3 Conformance . 31g34.2.8 Adjacent channel selectivity . 31g34.2.8.1 Definition 31g34.2.8.2 Limits 31g34.2.8.2.1 Base stations operating in Type 1 cdma2000 systems . 31g34.2.8.2.2 Base stations operating in Type 2 cdma2000 sys
14、tems . 31g34.2.8.3 Conformance . 31g3ETSI ETSI EN 301 908-5 V5.2.1 (2011-09) 45 Testing for compliance with technical requirements 32g35.1 Conditions for testing . 32g35.1.1 Introduction. 32g35.1.2 Standard equipment under test 32g35.1.2.1 Basic equipment 32g35.1.2.2 Ancillary equipment 32g35.2 Inte
15、rpretation of the measurement results 32g35.3 Essential radio test suites 32g35.3.1 Transmitter conducted spurious emissions . 33g35.3.1.1 Test procedure for Base Stations supporting operation in Type 1 cdma2000 systems . 33g35.3.1.1.1 Macro cell base station 33g35.3.1.1.2 Pico cell base station and
16、 femto cell 33g35.3.1.2 Test procedure for Base Stations supporting operation in Type 2 cdma2000 systems . 35g35.3.1.2.1 Macro cell base station 35g35.3.1.2.2 Pico cell base station and femto cell 36g35.3.2 Maximum output power 38g35.3.2.1 Test procedure for Base Stations supporting operation in Typ
17、e 1 cdma2000 systems . 38g35.3.2.2 Test procedure for Base Stations supporting operation in Type 2 cdma2000 systems . 39g35.3.3 Inter-Base Station transmitter intermodulation . 39g35.3.3.1 Test procedure for Base Stations supporting operation in Type 1 cdma2000 systems . 39g35.3.3.2 Test procedure f
18、or Base Stations supporting operation in Type 2 cdma2000 systems 2 39g35.3.4 Receiver conducted spurious emissions 40g35.3.4.1 Test procedure for Base Stations supporting operation in Type 1 or Type 2 cdma2000 systems . 40g35.3.5 Receiver blocking characteristics . 41g35.3.5.1 Test procedure for Bas
19、e Stations supporting operation in Type 1 cdma2000 systems . 41g35.3.5.2 Test procedure for Base Stations supporting operation in Type 2 cdma2000 systems . 42g35.3.6 Intermodulation spurious response attenuation . 42g35.3.6.1 Test procedure for Base Stations supporting operation in Type 1 cdma2000 s
20、ystems . 42g35.3.6.2 Test procedure for Base Stations supporting operation in Type 2 cdma2000 systems . 44g35.3.7 Adjacent channel selectivity . 44g35.3.7.1 Test procedure for Base Stations supporting operation in Type 1 cdma2000 systems . 44g35.3.7.2 Test procedure for Base Stations supporting oper
21、ation in Type 2 cdma2000 systems . 45g3Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) 46g3Annex B (normative): Base station Configurations 48g3B.1 Receiver diversity . 48g3B.2 Duplexers . 48g3B.3 Power supply options . 48g3B.4 Ancillary RF amplifiers 49g3B.5
22、BS using antenna arrays . 49g3B.5.1 Receiver tests 50g3B.5.2 Transmitter tests . 50g3Annex C (informative): Environmental profile and standard test conditions 51g3C.1 Introduction 51g3C.2 CDMA environmental requirements 51g3C.2.1 Temperature and power supply voltage 51g3C.2.1.1 Definition 51g3C.2.1.
23、2 Method of measurement . 51g3C.2.1.3 Minimum standard 52g3C.2.2 High humidity 52g3C.2.2.1 Definition 52g3C.2.2.2 Method of measurement . 52g3C.2.2.3 Minimum standard 52g3C.3 Standard test conditions 52g3ETSI ETSI EN 301 908-5 V5.2.1 (2011-09) 5C.3.1 Standard environmental test conditions 52g3C.3.2
24、Standard conditions for the primary power supply . 53g3C.3.2.1 General 53g3C.3.2.2 Standard DC test voltage from accumulator batteries . 53g3C.3.2.3 Standard AC voltage and frequency . 53g3Annex D (informative): The EN title in the official languages . 54g3Annex E (informative): Bibliography . 55g3H
25、istory 56g3ETSI ETSI EN 301 908-5 V5.2.1 (2011-09) 6Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can
26、 be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI I
27、PR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword Th
28、is Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been produced by ETSI in response to mandate M/284 from the European Commission issued under Council Directive 98/34/EC i.1 (as amended) laying down a procedure f
29、or the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5
30、/EC i.2. See article 5.1 of Directive 1999/5/EC i.2 for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC i.2 are summarised in
31、 annex A. The present document is part 5 of a multi-part deliverable covering the essential requirements under article 3.2 of Directive 1999/5/EC i.2 (R Part 2: “CDMA Direct Spread (UTRA FDD) User Equipment (UE)“; Part 3: “CDMA Direct Spread (UTRA FDD) Base Stations (BS)“; Part 4: “CDMA Multi-Carrie
32、r (cdma2000) User Equipment (UE)“; Part 5: “CDMA Multi-Carrier (cdma2000) Base Stations (BS)“; Part 6: “CDMA TDD (UTRA TDD) User Equipment (UE)“; Part 7: “CDMA TDD (UTRA TDD) Base Stations (BS)“; Part 8: “Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
33、of article 3.2 of the R Part 9: “Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R Part 10: “Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R Part 11: “CDMA Direct Spread (UTRA FD
34、D) (Repeaters)“; Part 12: “Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential requirements of article 3.2 of the R Part 13: “Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)“; ETSI ETSI EN 301 908-5 V5.2.1 (2011-09) 7Part 14: “Evolved
35、Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)“; Part 15: “Evolved Universal Terrestrial Radio Access (E-UTRA) (FDD Repeaters)“; Part 16: “Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of th
36、e R Part 17: “Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R Part 18: “E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Stations (BS)“; Part 19: “OFDMA TDD WMAN (Mobile WiMAX) TDD User Equi
37、pment (UE)“; Part 20: “OFDMA TDD WMAN (Mobile WiMAX) TDD Base Station (BS)“; Part 21: “OFDMA TDD WMAN (Mobile WiMAX) FDD User Equipment (UE)“; Part 22: “OFDMA TDD WMAN (Mobile WiMAX) FDD Base Stations (BS)“. National transposition dates Date of adoption of this EN: 12 September 2011 Date of latest a
38、nnouncement of this EN (doa): 31 December 2011 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 June 2012 Date of withdrawal of any conflicting National Standard (dow): 30 June 2013 Introduction The present document is part of a set of standards developed by
39、ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R or 2) operation in cdma2000 High Rate Packet Data Systems as defined in 3GPP2 C.S0024-C 7 subtypes 0, 1, 2 and 3, referred to herein in Type 2 cdma2000 systems. T
40、he present document is intended to cover the provisions of Directive 1999/5/EC i.2 (R Harmonized EN covering the essential requirements of article 3.2 of the R Part 1: Introduction and common requirements“. 11 ETSI EN 301 908-17 (V4.2.1): “Electromagnetic compatibility and Radio spectrum Matters (ER
41、M); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 17: Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R A guide to the production of candid
42、ate Harmonized Standards for application under the R for the reverse CDMA channel, there is one RF carrier. service option 2: loopback service option for radio configuration 1 NOTE: See TIA/EIA-126-D 4. service option 9: loopback service option for radio configuration 2 NOTE: See TIA/EIA-126-D 4. ET
43、SI ETSI EN 301 908-5 V5.2.1 (2011-09) 17service option 30: mobile station data loopback test mode for Multiplex Option 1 supplemental channel NOTE: See TIA/EIA-126-D 4. service option 31: mobile station data loopback test mode for Multiplex Option 2 supplemental channel NOTE: See TIA/EIA-126-D 4. se
44、rvice option 32: test data service option for radio configurations 3 through 6 on the reverse traffic channel and radio configurations 3 through 9 on the forward traffic channel NOTE: See TIA-870 5. service option 54: Markov service option for radio configurations 1 through 6 on the reverse traffic
45、channel and radio configurations 1 through 9 on the forward traffic channel NOTE: See TIA/EIA/IS-871-1 6. service option 55: loopback service option for radio configurations 1 through 6 on the reverse traffic channel and radio configurations 1 through 9 on the forward traffic channel NOTE: See TIA/E
46、IA-126-D 4. serving frequency: CDMA frequency on which a mobile station is currently communicating with one or more Base Stations slot: duration of time specified by 1,6 ms slotted mode: operation mode of the mobile station in which the mobile station monitors only selected slots on the paging chann
47、el soft handoff: handoff occurring while the mobile station is in the mobile station control on the traffic channel state NOTE: This handoff is characterized by commencing communications with a new Base Station on the same CDMA frequency assignment before terminating communications with the old Base
48、 Station. See hard handoff. space time spreading: forward link transmission method which transmits all forward link channel symbols on multiple antennas and spreads the symbols with complementary Walsh or quasi-orthogonal functions spreading rate: PN chip rate of the forward CDMA channel or the reve
49、rse CDMA channel, defined as a multiple of 1,2288 Mcps spreading rate 1: often referred to as “1X“ NOTE 1: A spreading rate 1 forward CDMA channel uses a single direct-sequence spread carrier with a chip rate of 1,2288 Mcps. NOTE 2: A spreading rate 1 reverse CDMA channel uses a single direct-sequence spread carrier with a chip rate of 1,2288 Mcps. spreading rate 3: often referred to as “3X“ NOTE 1: A spreading rate 3 forward CDMA channel uses three direct-sequence spread carriers (see multiple-carrier forward channel) each with a chip rate of 1,2
