1、 ETSI EN 301 914 V1.1.1 (2004-01)European Standard (Telecommunications series) Private Integrated Services Network (PISN);Use of QSIG at the C reference point betweena PINX and an interconnecting networkISO/IEC 20161 (2001), modifiedETSI ETSI EN 301 914 V1.1.1 (2004-01) 2 Reference DEN/ECMA-00270 Ke
2、ywords C reference point, endorsement, PINX, PISN, QSIG ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Importan
3、t notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Po
4、rtable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Informat
5、ion on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copy
6、right and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently
7、being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 301 914 V1.1.1 (2004-01) 3 Intellectual Property Rights IPRs essential or potentially essential to the present docum
8、ent may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of
9、ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existe
10、nce of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA on behalf of its members and those of the European
11、 Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrated Services Digital Network (ISDN) concepts as developed by ITU-T and
12、 conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document specifies the functional profile for interconnecting Private Integrated services Network eXchanges (PINX) to VPN service centres to permit interoperability between equipment fro
13、m different vendors and service providers. The present document endorses an International Standard, ISO/IEC 20161. National transposition dates Date of adoption of this EN: 19 December 2003 Date of latest announcement of this EN (doa): 31 March 2004 Date of latest publication of new National Standar
14、d or endorsement of this EN (dop/e): 30 September 2004 Date of withdrawal of any conflicting National Standard (dow): 30 September 2004 Endorsement notice The elements of International Standard ISO/IEC 20161 (2001) apply, with the following modifications. ETSI ETSI EN 301 914 V1.1.1 (2004-01) 4 Clau
15、se 3 Replace the first paragraph by: The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a spec
16、ific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. Insert the following normative references at the
17、end of clause 3.1: 26 ETSI ETS 300 475-1: “Private Telecommunication Network (PTN); Reference configuration; Part 1: Reference configuration for PTN eXchanges (PTNXs) ISO/IEC 11579-1 (1994), modified“. 27 ETSI EN 300 189: “Private Integrated Services Network (PISN); Addressing ISO/IEC 11571 (1998),
18、modified“. 28 ETSI EN 301 765: “Private Integrated Services Network (PISN); Functional requirements for static circuit-mode inter-PINX connections ISO/IEC 14474 (1998) modified“. 29 ETSI EN 301 039: “Private Integrated Services Network (PISN); Mapping functions for the employment of 64 kbit/s circui
19、t mode connections with 16 kbit/s sub-multiplexing ISO/IEC 17310 (2002) modified“. 30 ETSI ETS 300 387 (1994): “Private Telecommunication Network (PTN); Method for the specification of basic and supplementary services“. Replace clause 3.2 by: 31 ETSI EN 301 257: “Private Integrated Services Network
20、(PISN); Specification, functional models and information flows; Recall supplementary service ISO/IEC 15051 (2003), modified“. 32 ETSI EN 301 259: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Private Integrated Network eXchange (PINX) clock synchronization ISO/IEC
21、15507 (1997), modified“. 33 ETSI EN 300 261: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Call transfer supplementary service ISO/IEC 13869 (2003), modified“. 34 ETSI EN 301 264: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Advi
22、ce of charge supplementary services ISO/IEC 15050 (2003), modified“. 35 ETSI EN 301 265: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Call interception Additional Network Feature (ANF) ISO/IEC 15054 (2003), modified“. 36 ETSI EN 301 048: “Private Integrated Servic
23、es Network (PISN); Inter-exchange signalling protocol; Transit counter additional network feature ISO/IEC 15056 (1997), modified“. 37 ETSI EN 301 656: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Call priority interruption and call priority interruption protection
24、 supplementary services ISO/IEC 15992 (2003), modified“. 38 ETSI EN 301 810: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Private User Mobility (PUM); Call handling Additional Network Feature (ANF) ISO/IEC 17878 (2003), modified“. ETSI ETSI EN 301 914 V1.1.1 (2004
25、-01) 5 39 ETSI EN 301 919: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Single step call transfer supplementary service ISO/IEC 19460 (2003), modified“. 40 ETSI EN 301 827: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Wireless t
26、erminal call handling Additional Network Feature (ANF) ISO/IEC 15431 (2003), modified“. Clause 4 Replace in clause 4.1 “ECMA-143“ by “EN 300 172“ and “ECMA-165“ by “EN 300 239“. Throughout the text of ISO/IEC 20161 Replace references as shown in the table below. Reference in ISO/IEC 20161 Modified r
27、eference ECMA-133 ETS 300 475-1 26 ECMA-155 EN 300 189 27 ECMA-226 EN 301 765 28 ISO/IEC 14474 EN 301 765 28 ECMA-253 EN 301 039 29 ITU-T Rec. I.130 ETS 300 387 30 ECMA-174 EN 301 257 31 ECMA-176 EN 301 259 32 ECMA-178 EN 300 261 33 ECMA-212 EN 301 264 34 ECMA-221 EN 301 265 35 ECMA-225 EN 301 048 3
28、6 ECMA-264 EN 301 656 37 ECMA-284 EN 301 810 38 ECMA-300 EN 301 919 39 ISO/IEC 15431 EN 301 827 40 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 301 914 V1.1.1 (2004-01) 6 History Document history V1.1.1 August 2003 One-step Approval Procedure OAP 20031219: 2003-08-20 to 2003-12-19 V1.1.1 January 2004 Publication
