1、 ETSI EN 302 567 V2.1.1 (2017-07) Multiple-Gigabit/s radio equipment operating in the 60 GHz band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 302 567 V2.1.1 (2017-07) 2 Reference REN/BRAN-60020 Keywords acc
2、ess, broadband, LAN, radio, SRD, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The pr
3、esent document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of E
4、TSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that
5、 the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services:
6、 https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall n
7、ot be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are
8、 trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI EN 302 567 V2.1.1 (2017-07) 3 Contents Intellectu
9、al Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 8g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 10g33.3 Abbreviations . 10g34 Technical requirements spec
10、ifications . 10g34.1 Environmental profile . 10g34.2 Conformance requirements 11g34.2.1 Spectral power density 11g34.2.1.1 Definition 11g34.2.1.2 Limit 11g34.2.1.3 Conformance . 11g34.2.2 RF output power . 11g34.2.2.1 Definition 11g34.2.2.2 Limit 11g34.2.2.3 Conformance . 11g34.2.3 Transmitter unwan
11、ted emissions . 12g34.2.3.1 Definition 12g34.2.3.2 Limit 12g34.2.3.3 Conformance . 12g34.2.4 Receiver unwanted emissions . 12g34.2.4.1 Definition 12g34.2.4.2 Limit 12g34.2.4.3 Conformance . 12g34.2.5 Adaptivity (medium access protocol) . 13g34.2.5.1 Applicability 13g34.2.5.2 Definition 13g34.2.5.3 R
12、equirement 13g34.2.5.4 Conformance . 13g34.2.6 Void 14g34.2.7 Receiver Adjacent Channel Rejection 14g34.2.7.1 Applicability 14g34.2.7.2 Definition 14g34.2.7.3 Performance Criteria . 14g34.2.7.4 Limits 14g34.2.7.5 Conformance . 14g34.2.8 Transmitter unwanted emissions in the out-of-band domain 14g34.
13、2.8.1 Definition 14g34.2.8.2 Limit 14g34.2.8.3 Conformance . 15g34.2.9 Geo-location capability . 15g34.2.9.1 Applicability 15g34.2.9.2 Definition 15g34.2.9.3 Requirements 15g34.2.9.4 Conformance . 15g34.2.10 Occupied Channel Bandwidth 16g34.2.10.1 Applicability 16g3ETSI ETSI EN 302 567 V2.1.1 (2017-
14、07) 4 4.2.10.2 Definition 16g34.2.10.3 Requirements 16g34.2.10.4 Conformance . 16g35 Testing for compliance with technical requirements 16g35.1 Environmental conditions for testing . 16g35.1.1 Introduction. 16g35.1.2 Normal test conditions 16g35.1.2.1 Normal temperature and humidity 16g35.1.2.2 Norm
15、al power source 17g35.2 Interpretation of the measurement results 17g35.3 Test procedure for the essential radio test suites 17g35.3.0 General 17g35.3.1 Product Information 17g35.3.2 Test modulation, frequency and configuration . 18g35.3.3 Spectral power density 18g35.3.4 RF output power . 19g35.3.5
16、 Transmitter unwanted emissions . 20g35.3.5.0 Introduction . 20g35.3.5.1 Pre-scan . 20g35.3.5.2 Identified emissions 21g35.3.6 Receiver unwanted emissions . 22g35.3.6.0 Introduction . 22g35.3.6.1 Pre-scan . 22g35.3.6.2 Identified emissions 22g35.3.7 Receiver Adjacent Channel Rejection 23g35.3.7.1 Te
17、st conditions 23g35.3.7.2 Test Method 23g35.3.8 Adaptivity (medium access protocol) . 24g35.3.8.1 Test conditions 24g35.3.8.2 Test method . 24g35.3.8.3 Generic test procedure for measuring channel/frequency usage . 26g35.3.9 Transmitter unwanted emissions in the out-of-band domain 27g35.3.9.1 Test c
18、onditions 27g35.3.9.2 Test method . 27g35.3.10 Occupied Channel Bandwidth 28g35.3.10.1 Test conditions 28g35.3.10.2 Test method . 28g3Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 29g3Annex B: Void 30g3Annex C (normative): T
19、est sites and arrangements for radiated measurements . 31g3C.1 Test sites . 31g3C.1.1 Open air test sites . 31g3C.1.2 Anechoic chamber 32g3C.1.2.1 General 32g3C.1.2.2 Description 32g3C.1.2.3 Influence of parasitic reflections . 32g3C.1.2.4 Calibration and mode of use . 33g3C.2 Test antenna 34g3C.3 S
20、ubstitution antenna . 35g3Annex D (normative): General description of measurement . 36g3D.1 Radiated measurements 36g3D.2 Substitution measurement 37g3ETSI ETSI EN 302 567 V2.1.1 (2017-07) 5 Annex E (informative): Bibliography . 38g3Annex F (informative): Change History 39g3History 40g3ETSI ETSI EN
21、302 567 V2.1.1 (2017-07) 6 Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be fou
22、nd in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Po
23、licy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The p
24、resent document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those
25、 trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Broadband Radio Access Networks (BRAN). The present do
26、cument has been prepared under the Commissions standardisation request C(2015) 5376 final i.2 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of rad
27、io equipment and repealing Directive 1999/5/EC i.6. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document,
28、 a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. National transposition dates Date of adoption of this EN: 18 July 2017 Date of latest announcement of this EN (doa): 31 October 2017 Date of latest publication of new Nation
29、al Standard or endorsement of this EN (dop/e): 30 April 2018 Date of withdrawal of any conflicting National Standard (dow): 30 April 2019 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be
30、interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 302 567 V2.1.1 (2017-07) 7 Introduction 60 GHz radio equipment are capable o
31、f operating at data rates of multiple-gigabit per second. The spectrum usage conditions for this equipment are set in Commission Decision 2006/771/EC i.5 and ERC Recommendation 70-03 i.3, annex 3. ETSI ETSI EN 302 567 V2.1.1 (2017-07) 8 1 Scope The present document specifies technical characteristic
32、s and methods of measurements for radio equipment with integral antennas operating indoor or outdoor at data rates of multiple-gigabit per second in the 60 GHz frequency range. These radio equipments operate with very wideband communications using a variety of directional medium and high gain antenn
33、as to enable a high degree of spectrum reuse, and may use a flexible bandwidth scheme under which they normally operate in a wideband mode, and periodically reduce their bandwidth (e.g. for antenna training and other activities). The technical characteristics of applications using these radio equipm
34、ents are further described in ETSI TR 102 555 i.1. Equipment in this frequency range intended for outdoor Fixed Local Area Network Extension (FLANE) or Fixed Point-to-Point applications are not in the scope of the present document. These radio equipment types are capable of operating in all or any p
35、art of the frequency bands given in table 1. Table 1: Radiocommunications service frequency bands Radiocommunications service frequency bands Transmit 57 GHz to 66 GHz Receive 57 GHz to 66 GHz The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU i.6 under the
36、 conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location migh
37、t be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. Not applicable. 2.2
38、 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amend
39、ments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. ETSI ETSI EN 302 567 V2.1.1 (2017-07) 9 The following referenced documents are not necessary for the application of the present document but they
40、assist the user with regard to a particular subject area. i.1 ETSI TR 102 555: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics of multiple gigabit wireless systems in the 60 GHz range System Reference Document“. i.2 Commission Implementing Decision C(2015)
41、5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. i.3 ERC Recommend
42、ation 70-03 (Troms 1997 and subsequent amendments): “Related to the Use of Short Range Devices (SRD)“. i.4 Void. i.5 Commission Decision 2006/771/EC of 9 November 2006 on harmonisation of the radio spectrum for use by short-range devices. i.6 Directive 2014/53/EU of the European Parliament and of th
43、e Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. i.7 ETSI TR 100 028-2 (V1.4.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the
44、measurement of mobile radio equipment characteristics; Part 2“. i.8 ETSI TR 100 028 (V1.4.1) (all parts): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics“. 3 Definitions, symbols and abbreviations 3.1 Definit
45、ions For the purposes of the present document, the terms and definitions given in Directive 2014/53/EU i.6 and the following apply: 60 GHz range or 60 GHz band: one of the variously permitted frequencies of operation, typically from 57 GHz to 66 GHz activity factor: percentage over any one minute ti
46、me period when equipment is operating under a given set of conditions adjacent channel: channels on either side of the nominal channel separated by the nominal channel bandwidth channel separation: minimum separation (in MHz) between the centre frequencies of two adjacent channels in the channel pla
47、n of the radio equipment integral antenna: antenna which is declared to be part of the radio equipment by the manufacturer NOTE 1: In some cases, it may not be possible to remove an integral antenna or expose an antenna connector without changing the output characteristics of the radio equipment. NO
48、TE 2: Even with an integral antenna, it might still be possible to separate the antenna from the equipment using a special tool. mean power: average power (transmitted or received) during an interval of time sufficiently long to capture the On Time of the signal nominal channel bandwidth: band of fr
49、equencies assigned to a single channel NOTE: The Nominal Channel Bandwidth is declared by the manufacturer as outlined in clause 5.3.1. ETSI ETSI EN 302 567 V2.1.1 (2017-07) 10 occupied bandwidth: frequency bandwidth of the signal including 99 % of the energy below the lower and above the upper frequency limits, the mean power emitted is equal to 0,5 % of the total mean power of the emission smart antenna systems: equipment that combines multiple transmit and/or receive antenna elements with a signal processing function to increase its radiatio
