1、 ETSI EN 302 617 V2.3.1 (2018-07) Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical mobile service using amplitude modulation; Harmonised Standard for access to radio spectrum HARMONISED EUROPEAN STANDARD ETSI ETSI EN 302 617 V2.3.1 (2018-07) 2 Reference REN/ER
2、M-TGAERO-61 Keywords aeronautical, AM, DSB, harmonised standard, radio, testing, UHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de G
3、rasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified
4、without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users
5、of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send yo
6、ur comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of
7、ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for th
8、e benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI EN 30
9、2 617 V2.3.1 (2018-07) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 7g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 8g34 General requirements . 9g
10、34.1 Frequency control . 9g34.2 Controls and indicators . 9g34.3 Class of emission and modulation characteristics 9g34.4 Warm up . 9g34.5 Protection of the transmitter . 9g34.5.1 Definition 9g34.5.2 Method of measurement . 9g34.5.3 Requirement 10g35 General conditions of measurement . 10g35.1 Transm
11、itter test signal arrangement . 10g35.1.1 Coaxial termination. 10g35.1.2 Signal sources . 10g35.1.3 Normal test signal . 10g35.2 Receiver test signal arrangement 10g35.2.1 Test signal sources 10g35.2.2 Nominal frequency . 10g35.2.3 Normal test signal . 10g35.2.4 Squelch . 10g35.2.5 Normal audio outp
12、ut power 10g35.2.6 Audio AGC . 10g35.3 Test channels 11g35.4 Environmental profile . 11g35.5 Test power source . 11g35.6 Normal test conditions 11g35.6.1 Normal temperature and humidity 11g35.6.2 Normal power sources 11g35.6.2.1 Mains voltage and frequency 11g35.6.2.2 Other power sources 11g35.7 Ext
13、reme test conditions 12g35.7.1 Extreme temperatures . 12g35.7.2 Extreme values of test power sources . 12g35.7.2.1 Mains voltage 12g35.7.2.2 Other power sources 12g35.8 Performance test . 12g35.9 Environmental tests 12g35.9.1 General 12g35.9.2 Procedure for tests at extreme temperatures . 13g35.9.3
14、Temperature tests 13g35.9.3.1 General 13g35.9.3.2 High temperature . 13g35.9.3.3 Low temperature . 13g36 Transmitter . 13g3ETSI ETSI EN 302 617 V2.3.1 (2018-07) 4 6.1 General . 13g36.2 Frequency error 14g36.2.1 Definition 14g36.2.2 Method of measurement . 14g36.2.3 Limits 14g36.3 Carrier power 14g36
15、.3.1 Definitions 14g36.3.2 Method of measurement . 14g36.3.3 Limits 14g36.4 Amplitude modulation characteristic 15g36.4.1 Modulation depth 15g36.4.1.1 Definitions. 15g36.4.1.2 Method of measurement 15g36.4.1.3 Limits 15g36.4.2 Modulation compression . 15g36.4.2.1 Definition 15g36.4.2.2 Method of mea
16、surement 15g36.4.2.3 Limits 16g36.4.3 Amplitude modulation distortion 16g36.4.3.1 Definition 16g36.4.3.2 Method of measurement 16g36.4.3.3 Limits 16g36.4.4 Audio frequency response 16g36.4.4.1 Definition 16g36.4.4.2 Method of measurement 16g36.4.4.3 Limits 16g36.5 Adjacent channel power . 17g36.5.1
17、Definition 17g36.5.2 Measurement. 17g36.5.3 Limits 17g36.6 Broadband noise . 17g36.6.1 Definition 17g36.6.2 Method of measurement . 18g36.6.3 Limit . 18g36.7 Conducted spurious emissions (TX). 19g36.7.1 Definition 19g36.7.2 Method of measurement . 19g36.7.3 Limits 19g36.8 Intermodulation attenuation
18、 19g36.8.1 Definition 19g36.8.2 Method of measurement . 20g36.8.3 Limits 20g36.9 RF power attack time and release time . 21g36.9.1 Definitions 21g36.9.2 Method of measurement . 21g36.9.2.1 Attack time 21g36.9.2.2 Release time 21g36.9.3 Limits 22g36.10 Keying Transient frequency behaviour of the tran
19、smitter 22g36.10.1 Definition 22g36.10.2 Method of measurement . 22g36.10.3 Limits 23g36.11 Cabinet Radiation (TX) 23g37 Receiver 23g37.1 Sensitivity . 23g37.1.1 Definition 23g37.1.2 Method of measurement . 23g37.1.3 Limits 23g37.2 Effective acceptance bandwidth . 23g37.2.1 Definition 23g37.2.2 Meth
20、od of measurement . 24g3ETSI ETSI EN 302 617 V2.3.1 (2018-07) 5 7.2.3 Limits 24g37.3 Adjacent channel rejection . 24g37.3.1 Definition 24g37.3.2 Method of measurement . 24g37.3.3 Limits 25g37.4 Spurious response rejection 25g37.4.1 Definition 25g37.4.2 Introduction to the method of measurement . 25g
21、37.4.3 Method of search of the limited frequency range . 25g37.4.4 Method of measurement . 26g37.4.5 Limit . 26g37.5 Intermodulation response rejection 26g37.5.1 Definition 26g37.5.2 Method of measurement . 26g37.5.3 Limit . 27g37.6 Blocking or desensitization 27g37.6.1 Definition 27g37.6.2 Method o
22、f measurement . 27g37.6.3 Limit . 28g37.7 Conducted spurious emissions . 28g37.7.1 Definition 28g37.7.2 Method of measuring the power level 28g37.7.3 Limits 28g37.8 Cross modulation rejection . 29g37.8.1 Definition 29g37.8.2 Method of measurement . 29g37.8.3 Limits 29g37.9 Receiver dynamic range . 2
23、9g37.9.1 Definition 29g37.9.2 Method of measurement . 29g37.9.3 Limit . 30g37.10 Cabinet Radiation (RX) 30g38 Testing for compliance with technical requirements 30g38.1 Environmental conditions for testing . 30g38.2 Interpretation of the measurement results 30g3Annex A (informative): Relationship be
24、tween the present document and the essential requirements of Directive 2014/53/EU . 32g3Annex B (normative): Specification for adjacent channel power measurement arrangements 34g3B.1 Power measuring receiver specification . 34g3B.1.1 General . 34g3B.1.2 IF filter . 34g3B.1.3 Attenuation indicator 35
25、g3B.1.4 RMS value indicator . 35g3B.1.5 Oscillator and amplifier 35g3Annex C (informative): Auxiliary cables 36g3Annex D (informative): Change history . 37g3History 38g3ETSI ETSI EN 302 617 V2.3.1 (2018-07) 6 Intellectual Property Rights Essential patents IPRs essential or potentially essential to n
26、ormative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to E
27、TSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the ex
28、istence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI
29、claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organization
30、s associated with those trademarks. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.
31、7 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in th
32、e Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive
33、 and associated EFTA regulations. National transposition dates Date of adoption of this EN: 19 June 2018 Date of latest announcement of this EN (doa): 30 September 2018 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 March 2019 Date of withdrawal of any conf
34、licting National Standard (dow): 31 March 2019 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the exp
35、ression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 302 617 V2.3.1 (2018-07) 7 1 Scope The present document specifies technical characteristics and methods of measurements for DSB AM ground based transmitters, receivers
36、 and transceivers operating in all or any part of the aeronautical frequency band between 225 MHz and 399,975 MHz. NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU i.1 is given in annex A. In addition to the present document, other
37、 ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Directive 2014/53/EU i.1 as well as essential requirements under the Single European Sky (SES) Interoperability Regulation No 552/2004 i.3 and related implementing rules and/or essenti
38、al requirements under the EASA basic Regulation No 216/2008 i.5 as amended by Regulation No 1108/2009 i.6 may apply to equipment within the scope of the present document. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version
39、 number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee the
40、ir long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 300 113-1 (V1.7.1) (11-2011): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (an
41、d/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 1: Technical characteristics and methods of measurement“. 2 Recommendation ITU-T O.41 (10-1994): “Psophometer for use on telephone-type circuits“. 2.2 Informative references References are either sp
42、ecific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks inclu
43、ded in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of th
44、e European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. i.2 ETSI TR 100 028 (all parts) (V1.4.1): “Electromagnetic compatibility and Radio spec
45、trum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics“. i.3 Regulation (EC) 552/2004 of the European Parliament and Council of 10 March 2004 on the interoperability of the European Air Traffic Management network (the interoperability Regulation), OJEU L96, 31
46、.03.2004, p. 26-42 as amended by Regulation (EC) 1070/2009 of the European Parliament and of the Council of 21 October 2009, OJEU L300/34, 14/11/2009. ETSI ETSI EN 302 617 V2.3.1 (2018-07) 8 i.4 ETSI TR 100 028-2 (V1.4.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertaintie
47、s in the measurement of mobile radio equipment characteristics; Part 2“. i.5 Regulation (EC) 216/2008 of the European Parliament and of the Council of 20 February 2008 on common rules in the field of civil aviation and establishing a European Aviation Safety Agency, and repealing Council Directive 9
48、1/670/EEC, Regulation (EC) No 1592/2002 and Directive 2004/36/EC. i.6 Regulation (EC) No 1108/2009 of the European Parliament and of the Council of 21 October 2009 amending Regulation (EC) No 216/2008 in the field of aerodromes, air traffic management and air navigation services and repealing Direct
49、ive 2006/23/EC. i.7 Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: aeronautical mobile service: mobile service between aeronautical stations
