1、 ETSI ES 201 912 V1.2.1 (2004-08)ETSI Standard Access and Terminals (AT);Short Message Service (SMS) for PSTN/ISDN;Short Message Communication between a fixednetwork Short Message Terminal Equipment and aShort Message Service CentreETSI ETSI ES 201 912 V1.2.1 (2004-08) 2 Reference RES/AT-030032 Keyw
2、ords SMS, point-to-point, PSTN, ISDN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual
3、 copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document For
4、mat (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current
5、status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced e
6、xcept as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIP
7、HONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI ES 201 912 V1.2.1 (2004-08) 3 Contents Intellectual Property Rights6
8、 Foreword.6 Introduction 6 1 Scope 7 2 References 7 3 Definitions and abbreviations.8 3.1 Definitions8 3.2 Abbreviations .8 4 Functional description of UBS.9 5 Protocol 1 .11 5.1 Overview 11 5.2 Interworking between SM entities and PSTN/ISDN12 5.2.1 SM Submission from SM-TE to SM-SC 12 5.2.2 SM Deli
9、very from SM-SC to SM-TE.13 5.3 Protocol architecture.14 5.3.1 Physical Layer 14 5.3.2 Data Link Layer15 5.3.2.1 Overview.15 5.3.2.2 Error Handling 16 5.3.2.3 Timer.16 5.3.3 Transfer Layer 16 5.3.3.1 Overview.16 5.3.3.2 Error handling .17 5.3.3.3 Timer.17 5.4 Requirements to the gateway17 5.5 Requir
10、ements to the Short Message Terminal Equipment .17 5.5.1 SM-SC Phone numbers.17 5.5.2 Ringing suppression17 5.5.3 SMS memory full .18 5.5.4 SM-TE busy18 5.5.5 Calling Line Identification Restriction (CLIR).18 5.5.6 Handling of Incoming Calls bearing SM 18 5.5.7 Outgoing calls.19 5.6 Extensions to th
11、e cited GSM standards 19 6 Protocol 2 .20 6.1 Overview 20 6.2 Interworking between SM entities and PSTN/ISDN20 6.2.1 SM Submission from SM-TE to SM-SC 20 6.2.2 SM Delivery from SM-SC to SM-TE.21 6.3 Protocol architecture.22 6.3.1 Physical Layer 22 6.3.2 Data Link Layer22 6.3.2.1 Overview.22 6.3.2.2
12、Error handling .24 6.3.2.3 Timers and Response Time.25 6.3.2.4 Counters 26 6.3.3 Transfer layer26 6.3.3.1 Overview.26 6.3.3.2 Error handling .27 6.3.3.3 Timer.28 6.4 Requirements to the gateway28 6.5 Requirements to the Short Message Terminal Equipment .28 ETSI ETSI ES 201 912 V1.2.1 (2004-08) 4 6.5
13、.1 SM-SC phone numbers.28 6.5.2 Ringing suppression28 6.5.3 SMS Memory Full 28 6.5.4 SM-TE busy29 6.5.5 Calling Line Identification Restriction (CLIR).29 6.5.6 Handling of Incoming Calls bearing SM 29 6.5.7 Outgoing calls.29 Annex A (normative): Protocol 1 - Message Sequence Charts.31 A.1 SM from SM
14、-TE to SM-SC .31 A.1.1 Normal Case.32 A.1.2 Send more than one (as example: two) SM in one session.33 A.1.3 Failure detection in SM-SC Transfer Layer .34 A.1.4 Error detection in SM-SC DL Layer, correctable.35 A.1.5 Error detection in SM-TE DL Layer, correctable.36 A.1.6 Error detection in SM-SC DL
15、Layer, not correctable.37 A.1.7 Error detection in SM-TE DL Layer, not correctable.38 A.1.8 Timeout establish message in SM-TE DL Layer .39 A.1.9 Timeout acknowledge message in SM-TE DL Layer 40 A.1.10 No CM channel in SM-TE available 41 A.1.11 TL Message larger than 176 octets.42 A.2 SM from SM-SC
16、to SM-TE .43 A.2.1 Normal Case, SM-TE does not pick up Call from SM-SC.44 A.2.2 Normal Case, SM-TE picks up incoming call from SM-SC 45 A.2.3 Send more than one (as example: two) SM in one Session46 A.2.4 Error detection in SM-TE Transfer Layer 47 A.2.5 Error detection in SM-TE DL Layer, correctable
17、.48 A.2.6 Error detection in SM-SC DL Layer, correctable.49 A.2.7 Error detection in SM-TE DL Layer, not correctable.50 A.2.8 Error detection in SM-SC DL Layer, not correctable.51 A.2.9 Timeout establish message in SM-SC DL Layer .52 A.2.10 Timeout acknowledge message in SM-SC DL Layer 53 A.2.11 No
18、CM channel in SM-SC available 54 A.2.12 TL message larger than 176 octets .55 Annex B (normative): Protocol 2 - Message Sequence Charts and Parameters formats 56 B.1 Message Sequence Charts 56 B.1.1 Messages between layers in SME 56 B.1.2 Connection establishment.57 B.1.2.1 Normal Case .57 B.1.2.2 N
19、o CM Channel available in SME-M.58 B.1.2.3 Timeout in DLL establishing59 B.1.3 SM from SME-M to SME-S.60 B.1.3.1 Single segment, the SME-S_SM-TL confirms the SM before Tm6 expiry60 B.1.3.2 Single segment, the SME-S confirms the SM after Tm6 expiry.61 B.1.3.3 Single segment, the SME-S rejects the SM
20、before Tm6 expiry61 B.1.3.4 Three segments, the SME-S confirms the SM before Tm6 expiry .62 B.1.3.5 Single segment, recoverable error in SME-S DLL, the SME-S confirms the SM before Tm6 expiry .63 B.1.3.6 Single segment, recoverable error in SME-M_SM-DLL, the SME-S confirms the SM before Tm6 expiry64
21、 B.1.3.7 Single segment, recoverable loss of frame in SME-S_SM-DLL, the SME-S confirms the SM before Tm6 expiry65 B.1.3.8 Single segment, recoverable loss of frame in SME-M_SM-DLL, the SME-S confirms the SM before Tm6 expiry66 B.1.3.9 Single segment, unrecoverable error in SME-S_SM-DLL .67 B.1.3.10
22、Single segment, unrecoverable loss of frame in SME-M_SM-DLL.68 B.1.3.11 Single segment, unrecoverable loss of frame in SME-S_SM-DLL 69 B.1.4 Connection Release 70 B.1.4.1 Normal Case .70 B.1.4.2 Recoverable Error in SME-S_SM-DLL .71 ETSI ETSI ES 201 912 V1.2.1 (2004-08) 5 B.1.4.3 Recoverable Error i
23、n SME-M_SM-DLL 72 B.1.4.4 Unrecoverable Error in SME-S_SM-DLL73 B.1.4.5 Unrecoverable Error in SME-M_SM-DLL.74 B.1.4.6 No Message received by SME-S_SM-DLL before Tm2 expiry.74 B.1.4.7 No Message to send from SME-M_SM-TL before Tm7 expiry.75 B.2 Transfer Layer Messages and Parameters formats.75 B.2.1
24、 TL Messages 75 B.2.1.1 SMS_SUBMIT Message Format75 B.2.1.2 SMS_DELIVERY Message Format .78 B.2.1.3 SMS_STATUS_REP Message Format.79 B.2.1.4 SMS_SUBMIT_REP Message Format.79 B.2.1.5 SMS_DELIVERY_REP Message Format79 B.2.1.6 SM-TE_STATUS Message Format79 B.2.1.7 SM_TE_CAPABILITY Message Format.80 B.2
25、.2 Parameters 80 B.2.2.1 Media Identifier Parameter Format.80 B.2.2.2 Firmware Version Parameter Format80 B.2.2.3 SMS_Provider_Identifier Parameter Format 81 B.2.2.4 Display Information Parameter Format 81 B.2.2.5 Date and Time Parameter Format .82 B.2.2.6 Calling Line Identity Parameter Format .83
26、B.2.2.7 Reason for Absence of CLI Parameter Format.83 B.2.2.8 Calling Terminal Identity Parameter Format 83 B.2.2.9 Called Line Identity Parameter Format.83 B.2.2.10 Fax Recipient Name Parameter Format 84 B.2.2.11 Mail Address Parameter Format .84 B.2.2.12 Called Terminal Identity Parameter Format .
27、84 B.2.2.13 Notify Parameter Format 84 B.2.2.14 Public Key Parameter Format.85 B.2.2.15 SM-TE Resources Parameter Format .85 B.2.2.16 Response Type Parameter Format 86 B.2.2.17 Bearer Capability Parameter Format.87 B.2.2.18 Replace Short Message Type Parameter Format 88 B.2.2.19 Validity Period Para
28、meter Format 88 B.2.2.20 Data Information Parameter Format .88 Annex C (informative): Bibliography.89 History 90 ETSI ETSI ES 201 912 V1.2.1 (2004-08) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertai
29、ning to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretar
30、iat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or th
31、e updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This ETSI Standard (ES) has been produced by ETSI Technical Committee Access and Terminals (AT). Introduction The Short Message Service (SMS) is a service that allows text messages to b
32、e sent and received. The present document specifies protocols to provide this service on the fixed network. The transmission of messages of up to 160 characters is guaranteed, although much longer messages are possible. The protocols specified in the present document support a User Based Solution (U
33、BS), where messages are transported via a Short Message Service Centre (SM-SC) using a normal voice band call through the network using in band signalling. SMS messages are sent via the SM-SC using a store and forward principle. The protocols specified in the present document provide a reliable serv
34、ice that ensures correct delivery of SMS messages and also allows the originating user to verify that an SMS has been correctly received by the receiving terminal. The provider of the short message service does not necessarily have to be the operator of the public telecommunications network. The Sho
35、rt Message Service does require the CLIP function to be implemented in PSTN/ISDN. It is noted that EN 300 659-3 6 specifies a set of parameters for PSTN that describes a method of delivering Short Messages, however this is a different protocol from the SMS protocols specified in the present document
36、. The present document specifies two different protocols to provide the SMS over PSTN/ISDN. Both protocols offer the opportunity to exchange Short Messages with other networks, e.g. GSM and with other services, e.g. Email, Fax. Each protocol has its advantages; the service provider can select which
37、protocol to implement: Protocol 1 has the advantage of being fully compliant with the GSM SMS service. Protocol 2 has the advantage that it specifically focuses on the residential fixed network environment. ETSI ETSI ES 201 912 V1.2.1 (2004-08) 7 1 Scope The present document deals with two different
38、 protocols to provide the Short Message Service for PSTN/ISDN using a User Based Solution (UBS). For both protocols it specifies the protocol layers used to transmit Short Message Information between Short Message Terminal Equipment connected to PSTN/ISDN and a Short Message Service Centre. It is up
39、 to the service provider to choose which protocol to use. It does not specify the dial-in systems and the architecture of the short message service centres. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. R
40、eferences are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly av
41、ailable in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ETSI TS 123 038: “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Alphabets and language-specific information (3GPP TS 23.038 Release 5)“. 2 ETSI TS 1
42、23 040: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Technical realization of Short Message Service (SMS) (3GPP TS 23.040 Release 5)“. 3 ETSI TS 124 011:“Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunic
43、ations System (UMTS); Point-to-Point (PP) Short Message Service (SMS) Support on Mobile Radio Interface (3GPP TS 24.011 Release 5)“. 4 ETSI EN 300 659-1: “Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for disp
44、lay (and related) services; Part 1: On-hook data transmission“. 5 ETSI EN 300 659-2: “Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 2: Off-hook data transmission“. 6 ET
45、SI EN 300 659-3: “Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Subscriber line protocol over the local loop for display (and related) services; Part 3: Data link message and parameter codings“. 7 ETSI ES 200 778-2: “Access and Terminals (AT); Analogue a
46、ccess to the Public Switched Telephone Network (PSTN); Protocol over the local loop for display and related services; Terminal Equipment requirements; Part 2: Off-hook data transmission“. 8 ITU-T Recommendation V.25: “Automatic answering equipment and general procedures for automatic calling equipme
47、nt on the general switched telephone network including procedures for disabling of echo control devices for both manually and automatically established calls“. 9 ETSI EN 300 403-1: “Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Signalling n
48、etwork layer for circuit-mode basic call control; Part 1: Protocol specification ITU-T Recommendation Q.931 (1993), modified“. ETSI ETSI ES 201 912 V1.2.1 (2004-08) 8 10 ETSI EN 300 090: “Integrated Services Digital Network (ISDN); Calling Line Identification Restriction (CLIR) supplementary service
49、; Service description“. 11 ISO 3166-1: “Codes for the representation of names of countries and their subdivisions - Part 1: Country codes“. 12 IETF RFC 3066: “Tags for the Identification of Languages“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Deliver Mode Identifier (DMI): special digit of the calling party number of the Short Message Service Centre presented to the SM-TE NOTE: The value of this digit determines whether the Short Message Terminal Equ
